Setup Husqvarna Yard Tractor - 10 simple steps
Vložit
- čas přidán 8. 07. 2024
- Here's the process to use if you have a new Husqvarna yard tractor and you need to set it up. Here are the 10 steps I'll take you through (at 12:15, I push the freewheel control in while the engine is running, this is a mistake. The engine should be off before engaging the freewheel control) :
#1 Download the Manuals
www.husqvarna.com/us/support/...
#2 Check Tire Pressure
#3 Level the Mowing Deck
#4 Check Height of Anti-Scalp Wheels
#5 Check Deck Belt Routing
#6 Lubricate your Tractor
#7 Check Engine Oil
#8 Check Battery Connections
#9 Purge the Transmission (at 12:15, I push the freewheel control in while the engine is running, this is a mistake. The engine should be off before engaging the freewheel control)
#10 Check the Brake
This process will help you insure your new tractor / lawn mower is setup properly and will be safe to operate. Thanks for watching! Leave any questions or comments in the Comment section below!
Dennis Coffey
DIY with Dennis
Setup Husqvarna Lawn Tractor - Jak na to + styl
The dad stuff we all appreciate! Thank you for showing me this.
Thank you for watching, Tyler! I am blessed to have a Dad that has taught me (and is still teaching me) how to do many things.
@@dwcoffey where is the link to the video on how to grease?
It is so nice of this guy to take time out of his day to help people with this kind of stuff! Thanks 🙏
Thank you Finn! I appreciate you watching and thank you for the nice comment!
1915 penny
@@dwcoffey How is the mower doing(2020 now)? Thanks for the video. Subbed.
It sure is. Thank you sir!!!
Thank you for taking the time to do this! Getting ready to purchase the YTH18542 after 30 years with my current mower, which is still cutting grass! Just ready for a new machine and I believe in taking care of things and they will return the favor! God Bless!!!!
Thank you for watching, Greg!
My father in law has this exact mower. He’s 79 and refuses help, but is not able to physically do it anymore. Your demeanor keeps me sane while helping him without stepping on his manly pride. Thank you so much for these videos. You sir, are a blessing and seem like a good man.
Thank you for watching, Sammy! Bless you for helping your father in law and minding his feelings. It's got to be tough being 79 and you are helping him the right way.
I just bought a used 48" Husqvarna. This info is priceless. I would have never known about the transmission ! Thank You
Thank you for watching! I have several videos covering various topics about these mowers, I hope some of them will be useful to you also! Thanks again.
Ummm what if I didn’t purge the transmission when I first got it and drove it around for 10 minutes first 🤭
Thank you for taking the time to show me how to service my mower on my own. As a single mommy time & money are always short on supply, so i really appreciate this♡
I'm so glad to know this helped! Thanks for watching, Deeba!
Great video. Taking delivery of my tractor in a couple of days. I assumed all that would be done prior to delivery. Thanks for alerting us.
Thank you for watching, Richard! I'm glad this will help!
Thank you so much, reading the manual is just not the same as seeing it done. Thanks for taking the time to make this video
Thank you for watching, Dennis!
Thank you. You had me riveted even though my tractor is a JD 318 from 1987. Excellent presentation.
Thank you so much, Douglas!! I appreciate the kind comment and thank you for watching!
Really clear, concise, well spoken useful information with no nonsense, thank you.
Thank you so much! I appreciate your kind comment and thank you for watching!
Thank you for this!!! You are a great teacher. I'm not familiar with tractors/riding lawn mowers, so your tutorial is super helpful.
I'm so glad this helped, Tiffany! Thank you for watching!
Great job Dennis, thanks for posting this!
Thank you, Mark! I appreciate you watching!
Excellent video, I just ordered my Husqvarna today and will be delivered tomorrow, Thanks Mr Coffey
Thanks for watching, Gary! I hope you enjoy yours as much as I have mine!
Just bought a new Husqvarna tractor and this video was super helpful! Thanks for posting content like this!
Thank you for watching, Ryan! I appreciate your support!
Dennis, Thanks a ton for posting this. I've downloaded the Manual and read through it, but it's still better to see somebody actually go through step by step. I'll definitely check out your other videos. I just had a ts146xd delivered and it snowed the next day, but supposed to be in the 60's next week so will hopefully get a chance to try it out. Thanks again.
Thanks for watching, Larry! I'm glad this helped. Yes, hopefully, you'll get some good weather to try that new machine out!! Thanks again!
Such a helpful video! Thank you!
Thank you Cheryl! I appreciate you watching and thanks for the comment!
Just got this off the Lowes' delivery truck.. i was not aware of the Free wheel engage, and was looking at why I could not get this machine into drive.. The only thing on your list I did check before first try was the Oil and Battery.. Now, after seeing this video, I am a little more educated on the subject.. THANK YOU.
I'm really glad this helped, Lincoln! Thanks for watching!
Another great video Dennis! I just purchased the YTH 42” model. It was delivered today. I’ll go through all of these steps tomorrow. I’m willing to bet that most don’t even think about all of this.
Thank you so much David! I appreciate you watching and glad this helps.
thank you for doing this. just got my first new to me tractor and am getting it ready for snowblowing. this helped a lot!
Thanks for watching, Chris!
Thanks for sharing this video with us. I have the 24horse 54inch cut. I love it
Thank you for watching, David!!
Thank you so much! Your videos are beyond helpful!
Thank you very much for watching!
Excellent - thanks from Oz
Cheers! Thank you for watching, Derek!
You are the MAN!!!!!
Thank you Danny!!
Thanks...got one being delivered Monday...didn't know I had to purge the transmission,until now. 👊
Thanks for watching!
This is awesome. Thank you for your help. Very clear to understand.
Thank you for watching, Randy!
Thanks for the easy to follow tutorial. I will be looking at your other videos.
Thanks for watching, Denis!
What a lifesaver! I just bought a 2nd. hand one of these & never used one. Many thanks ole Mate.
Thanks for watching, Frank! I hope the vid helps...let me know how the tractor works out!
@@dwcoffey 'onya Dennis!
This was a great video. 1st time rider mower owner. Got a Huskavarna. Very easy to follow!
Great Michael! I'm glad it helped and I thank you for watching! I've got other videos on my channel covering a lot of maintenance items for this tractor too!
Helpful, thank you!
Thank you very much for watching!
just bought a 1500 dollar
Husqvarna from homedepot
it be here monday and i been watching your video last few day. im glad I found this video about the transmission. thank you sir
Thanks for watching! Yes, setting it up properly, purging the transmission and greasing the front spindles are probably the most common items that need attention. I have several other videos about this tractor that may help you also. Thanks again and I hope your tractor does as well as mine has!
Thanks for the tips. I learnt something today
Thanks for watching, Al!
this is a great video, seriously informative to a non mechanical guy like me, thanks!
Thank you for watching!
Thanks for doing this video. Just bought the same tractor. This will help a lot!
Thank you for watching!
Thank you for the video.....the instructions werent that clear on how to purge the transmission. You make it look so much easier than it sounded
Thank you for watching, Jodi! I'm glad to know this helped!
this how-to video deserves an award. very very helpful, easy to follow, essential information! 👍👍
**subscribed**
Thank you so much, Kay! I appreciate you watching and subscribing!
Thank you for this video.
Thank you for watching, Eric!
Thank you for this great video.
Thank you very much for watching!
Thank you so much. I use to have a husband do all this stuff but ....... well you know. Thank you so much for taking the time to help out people. :)
Thank you so much for watching, Christine!
What a nice guy, so many helpful tips👍👍
Thank you so much, Alan! I appreciate you watching!
Yes! I love this....I have a husqvarna yth18542 and am rebuilding the deck....but having a problem with placement if the torsion spring.. .not the one one the idler arm...but the one on the spindle brake....
Thanks for watching, Sarah! I think you are talking about the one on the right spindle...the spring goes from the spindle brake lever, back to the rear hanger on the deck (where the lift arm attaches). I hope that helps!
Just bought the Husqvarna yth18542 an hour ago. thanks for the tips. Delivery tomm. Very similar to the Craftsman ytd. i do like your videos!
Thanks so much for watching! I hope my vids are helpful, enjoy your new mower!
Another great video as you always do Dennis. Thanks. ~~~ On the DECK ADJUSTMENT you forgot to mention the *FRONT to REAR DECK ADJUSTMENT*. ~ The FRONT of the deck should be adjusted 1/8" to 1/2" LOWER than the REAR of the deck according to the manual. I adjust mine to 1/4" lower in the front. -
--> Another Tip: I never mow after dark, so one of the first things I did was to disconnect (unplug) the wiring harness to the headlights to prevent any potential drain on the battery. I electrical taped off both ends of the connectors and wire tied them up out of the way of everything. (The wiring only goes to the headlights.)
Yes sir, that's a great point Jim! That front rod will raise the front edge of the deck when tightened and lower it when loosened. I definitely should have mentioned that. Maybe I'll do a separate short video only covering adjusting the deck. I do the same as you....set the front edge to 1/4" lower than the rear...seems to give the best cut. Thanks again!
Dennis a great vid. I am a small engine tech that works on husq. eqmt. Two things to add 1 engine oil drains are ALWAYS loose, and I recommend to replace with 1/4 in. pipe with a cap as the plastic part of the drain WILL eventually fail. 2 DONT purge with the free wheel engaged, There is a small pin in the hydro unit that separates the drive motor and could catch and/or score the plate as it spins freely. All 10 should be checked by whom ever sets it up but these are also basic maint. things owners should do but mostly dont. Not trying to be a troll just want to give info. to someone who might care. Thanks, Tony
Thanks Tony! I really appreciate the feedback! I did modify the oil drain later: czcams.com/video/rGfXpM1J2g4/video.html and got rid of that yellow leaky valve haha. Good point on the purge technique....thank you! I appreciate you watching and thanks for the pointers!
So if you don't use the free wheel for the purge how do you do it?
Great vid very thorough. Thanks
Thanks Nick! I appreciate you watching!
Thank you!
Thank you for watching, Juanita!
THANK YOU. I just bought my first riding lawn mower (a Husqvarna that looks just like this one) and was too afraid to start using it. After watching your video, I gathered the courage to give it a go and I'm just in from mowing what took me about six to eight hours with my little electric mower. Bouncing joyously along on the riding mower, it all took about two hours and I even gathered the nerve, if not skill, to slowly edge along the fencing and borders. So, seriously, thank you - and if you aren't a full-time teacher...you should be! Great, thorough, calming video!!!
That's great Mary!! I'm glad you got it all setup and mowed with it, sounds you saved a ton of time! Thank you for such a wonderful comment and I'm really glad to hear this video helped! Thanks !!
Dennis, I too just purchased a new YTH24v48 with the grass catcher attachment two weeks ago. I found this video to be very helpful now that I have mown my lawn twice without purging the tranny. In our 32 years of marriage this is the first new rider we have purchased. I have been thoroughly pleased. Mowed he front and back yard and dumped the clippings in 45 minutes. I will second Mary’s assertion that you must be a teacher/trainer in your day job. All questions were anticipated and addressed completely. I have touched the subscribe icon. In looking over the videos on this channel there is quite a diverse subject matter. Looking forward to poking through them to see what else I can learn. Blessings.
Thank you Brian! And thanks for the sub too!
This was very helpful! 👍🏾
Thanks for watching!
I just bought the same tractor. Thanks for the advice.
Thank you for watching, John! Be sure to check out my other videos on this tractor!
Dennis, what a great video, very informative. If I may, I would like to add a comment about maintaining your mowers engine.
Always remember that oil expands when it gets warm. So that means the oil level shall be just a little lower when the engine and oil is cold and that also means the engine oil level shall be a little higher due to expansion after warming up and running the engine for 20 min. or more.
So remember that fact when you check your engine oil. You should check the level cold and then again after cutting your lawn. Then check the engine oil when it's warm and you will see that the level is higher. I think its better to add oil to a warmed up engine because you can see the height of the oil at the operating temperature and that will help you not to overfill the oil.
Keep an eye on the oil level during the first month or use and of operation or until you are satisfied that you understand the relationship oil has with heat and the oil level with your machine. Once you know what you are doing you will be able to maintain the oil level between the lines.
All great points! Thanks for watching!
Great Video thanks
Thanks! I appreciate you watching!
It's really useful, very nice video.... I have a YTH2042 but almost all features is the same. Thanks to take time to record and share this video..
Greeting from Brazil
Thank you for watching, Rodrigo!
Very useful video again dennis.
Thank you Travis! I appreciate you!!
Appreciate ya bud, god bless.
Thank you Justin! I appreciate you watching!
Thank you so much....I've been trying to figure out how to adjust my seat and your the only video I seen that shows how
Thanks for watching!
Your welcome...my seat keeps sliding all over when I'm sitting on it...do u know what the problem is cause I'm a fat person and I don't like it sliding up on me lol squeezes the life out of me lol
It sounds like the catch may not be working. I'd try sliding the seat into the desired position while standing behind the mower, not sitting in the seat. Then see if you can make the seat move with your hands. If you can, the seat catch is not locking into place.
Great advice on new mower procedures..
Generally mowers are shipped to retail outlets and requires the retailer to partially assemble and or install some components to make it ready to run....I know this because I used to set these up for retail sales..
Some things might be overlooked between the manufacturer and retail outlet.
Do not assume all systems are go until you check them..
Before I found this video, I checked everything and more because, well, I'm a Coffey lol!
Great video cousin lol!!
Yes sir!! My Dad is the same way....trust but verify. Thanks so much for watching, Brad! Glad to see support from a Coffey cousin!
There"s a front to rear deck adjustment too. It's in the front. Tighten to raise the front, loosen to lower the front.
Thanks for watching, David! Yes sir..you are correct. Thanks for mentioning it because I don't think I covered that adjustment in the video and I should have. It's good to have the front of the deck just a touch lower than the rear.....I usually keep mine between 1/4" and 1/2" lower ion front.
Hi Dennis....great video... very informative!
Thank you Thomas! I appreciate you watching!
Good job on the video. Got a YTH46 being delivered on Monday. Not my first riding mower, but my first brand shiney new one. Knew about some of the points mentioned, but not all. Never even heard about the hydrostatic purge. Thumbs up.
Thank Mac! I appreciate you watching and thanks for liking the video!
Got mine last summer never heard of that purge too. Thanks for sharing your knowledge and experience! Mine’s doing a weird song when unleashing the break looks like something loose or I don’t know. Can it be that the purge is needed?
@@SoberJokR YOU my friend did NOT read your instruction manual then did you ??? because it is covered in there !!!
MacTx 53 READ the instruction manuals and info on the attached instructions !!! It is there !!!
Ok, I’ve had my mower for 4 years now and only just this minute learned how to start and run it without being in the seat. SET THE BRAKE!
Thanks for watching, Robert! :)
Well explained.
Thank you, Danny! I appreciate you watching!
thank you very much. helped me big time!!!!!!
Thank you for watching!
My 22V46 is being delivered tomorrow and this video should be on the HV home page. It's one thing to read it in the manual but seeing the setup process visually is 100x better. Thank you!!
Thanks for watching, David! I appreciate the support! I hope all goes well with the new mower!
Thanks!
Thank you for watching!
Hoping that all this info is the same for TS146XD. That baby is gonna be delivered tuesday! Thank you for all the amazing info, had no clue all this was involved. New to the garden tractor life
Thanks for watching, Dennis! From what I can tell, I think the TS146XD is very similar, so a lot of my videos should apply to your tractor as well. If they don't give you a manual, you can download one free on Husqvarna's website...they carry the Operators manual and the Repair Parts manual for most models.
this was an awesome video...thank you! learned a few things!
Thank you very much, I appreciate you watching and the nice comment!
You are awesome
Thank you so much!!! I really appreciate you watching!
1:39 Confirming #2, CHECK THE TIRE PRESSURE. Mine came new with 20-25 psi per tire. As stated, the tire sidewalls do reflect: front, 14 PSI and rear, 10 psi.
Manual states, "The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance. • Reduce tire pressure to PSI shown on tires."
Thank you for watching, Dave!
Forgot to purge til after I cut grass. Purged it anyway just in case not too late. Works good though.
Thanks for watching!
Thank you for your help 👍
Thank you for watching!
Hey thanks a lot for the information I never saw a nice video like this thanks a lot I really appreciate it I'm going to buy one next week did you
Thank you for watching!
Dennis Coffey 2020!! MMGA!! [MAKE MOWING GREAT AGAIN]
LOL! I love it!! Thanks for watching, Robert!
@@dwcoffey Don't forget to pick a fellow landscaper for your running mate
Lol! Awww..dang I hope I don't get one made on Friday last shift!! I'm checking all factory work schedules from now on!! Thank you
Right! Thanks for watching, Waleed!
In the owner's manual for the Husqvarna TS242XD it has a very specific warning. CAUTION: Never engage or disengage freewheel control while engine is running. The warning is printed on page 12, right over the instructions on how to purge your transmission. Your purging instructions are correct with the exception that the engine should be stopped when moving the freewheel lever. I haven't seen every manual, but they use Tuff Torq transaxles so I would guess the procedure would be the same.
Yes sir, you are correct! I made a mistake when engaging the freewheel control with the engine running and made note of that in the video description. I believe you are correct also in that this applies to all tractors with the Tuff Torq transmission. Thanks for pointing that out....I need to see if YT will allow me to put a note on that segment of the video. Thank you for watching!!
Thanks for the great video! There should be a link to this on Husqvarna's website.
I agree!! That would be great for me! Thank you for watching!!
Thanks for the video!
Great tip about the parking brake keeps the engine running when you get off.
What happens if you run the tractor and the transmission is NOT purged? thx.
Thanks Robert! If the transmission is not purged, typically it will 'slip' on occasion. Also, not purging will leave air in the transmission, which ultimately could damage it as there will be voids in the hydraulic oil coverage of internal parts.
I appreciate your videos regarding this tractor. They have been most helpful. Regardless, I have to ask about the handle protruding from the right side of the engine cover ... it looks like a machete or some other type of implement. I'm just curious ...
Thanks for watching, Paul! I appreciate your support. You guessed it! I keep a machete stowed there for quick limb-trimming etc. It will slide right inside the hood and the end fits in a pocket that exists between the hood-side and the headlight assembly.
An FYI: Make sure you get the Husqvarna Front Detacher. 100% better than a rear mount detacher. This detacher is sick and great! I bought mine from Lowe's. You can leave the mounting frame on your tractor and take the detacher off. 46" you will need to add the extra mounting frame, because the tractor frame doesn't have the front mounting holes (unsure about 42", because I own the 46").
m.lowes.com/pd/Husqvarna-40-in-Dethatcher/999930870
Thanks for the tip!! Sounds like a good way to go.
Dennis Coffey Trust me my friend it is great and a million times worth the money. The hardest part with putting it together and putting it on my tractor, was putting on the part with front mounting holes on the frame. Becareful there is an electric wire on the left hand side of the tractor (as you are looking at the front of the tractor.). I have the bagger for my 46", detach and pickup at the same time! It is tuff/hard trying to turn left or right when the detacher is lowered. I pick it up and then turn.
My battery cables were not fully tightened on the posts on delivery, so yep, these points are worth checking.
Also, reminder if buying new... CHECK THE TIRE PRESSURE as Dennis warned. Mine came new with 20-25 psi per tire. The tire side panels reflect: front, 14 PSI and rear, 10 psi. Manual states, "The tires on your tractor were overinflated at the factory for shipping purposes. Correct tire pressure is important for best cutting performance. • Reduce tire pressure to PSI shown on tires."
Thanks for watching, Dave!
Very helpful thanks..I never knew about tranmission purge before..but is it normal for the front of the deck to be substantially lower than the rear?..I just acquired a 2654 that is like that..
Thanks for watching! Yes, most all of the mowers I've dealt with will recommend/require the front of the deck to be 1/4" to 1/2" lower than the rear. any more than that tends to give a bad cut, especially on lower settings.
I have a YTH18542 mower which is supposed to arrive this week. I have been reading the manual, but I am not so sure as to my understanding of setting the mowing cut level with the stick control. I am scheduled to have my front lawn ripped out and a sod lain in the near future. They recommend mowing it at a height of 3", but I am not sure I understand what the numbers actually represent as to cut height. Does the 3 represent 3" or what, as some folk say they cut much higher and I sure don't want to ruin the new lawn by cutting it incorrectly on those settings. I plan to use this video as a guide from day one of receiving my mower. Thanks for any advice on this. Maybe I am just skipping/overlooking something or not reading correctly from the manual, but trying to find out about this mower and all the variances as I can. Thanks for the great videos you have shared. i appreciate it.
Thanks for watching, James! The numbers on the deck height setting do not seem to correspond to the cut height. The scale on mine is 1 to 6. About the highest you can get one of these to cut your grass is 3.5 to 4" So....I'd level the deck, take a few passes at the max deck height and see what you have. Then adjust your deck setting from there. With a centipede lawn, I usually but mine on 4 or 5.
Hey Dennis,
Great advise my deck is now level.
I was wondering, i just did my Break in oil & filter change i also greased all grease fittings and steering grear & plate just like you showed me in your video.. anyway you mentioned changing the pluming in the oil drain did you ever complete that if so please show me how you did it. Once again thank you so much for all your help your amazing, takeing time out showing people like me how to do it right......
Hey Danny, thanks so much for watching and commenting! I've gotten the materials needed to re-plumb the oil drain but haven't done it yet. I'm going to try to get it done very soon and get a video up showing how to do it. Thanks again, I really appreciate your kind words and support!!
Dennis Coffey
Thank you Dennis I can't wait.....
I will be looking out for it, for sure.
Thanks again for all your help...
Hi Dennis, I have a carburetor issue on my Husqvarna 48" tractor we were mowing in a very dusty area ,dust got around the air cleaner into the carb.it will only start by using a quick shot of starter fluid, runs fine after that. Plugs were new only 4 hr seemed very dark so I cleaned them, no change.do you have a video on removing said carb and cleaning ?.......Thanks for your previous help✌🏻️
I don't Alan, I'm sorry. You could try running a can of Seafoam through it...that stuff works wonders. If not, sounds like the carb may need to come off and you may need to clean the jets.
Your video is very helpful! I have a question, and am hoping you can help me out? My husband and I just purchased the same model 22hp 42in deck and we have a fairly steep hill in our back yard, the tractor seems to drive very slow uphill and the tires are slipping. I was wondering if this might just be an issue with the tires slipping or maybe it is just not good for uphill? I am not sure.
Hi Brenda, thanks so much for watching! I have not had any trouble with mine not pulling a hill. It has plenty of power to climb, but the tires do slip, especially if wet, and that causes some problems. I have filled my rear tires with antifreeze for extra weight and that helps a lot.
Nice job on the Video and thank you for adding the links to the different manuals. We have a Husquana YTH24K48, The deck /height adjustment level will not go any lower then the 2.5 setting. How can we fix this issue? It went in for a repair and when we got it back it was like this. Service said they did not adjust the deck cutting.
Hi Sue, thank you for watching. It might be tough for me to diagnose that problem without seeing the tractor, but lets give it a try! What did the service folks repair? Is the deck only going to 2.5 because it is on the ground at that setting, or is it still off the ground and something else is preventing the adjustment from going further?
My mower deck has 6 height adjustments but will not go any lower than the #4 setting. Been that way since new and I bought it new 12 years ago. Recently put taller tires on front and rear and helped this issue somewhat. Plus help keep me from getting my 54” deck from hanging up on uneven places. Also put aggressive tread tires on the rear to help increase traction
It went in for repair due to the engine running hot. The service repair ticket also states that they cleaned the under side of the deck where there was grass buildup. The deck is still off the ground.
The service tech states that when you raise the deck to the highest slot the deck is at the maximum height and can't be raised any more without causing damage to the mower.
I purchased a Husqvarna lawn tractor two years ago. I hate that I cannot raise the deck higher. At the highest setting, it is still too low to mow anything but flat ground. It is useless at my cabin.
I can raise the deck on my 18 year-old Poulan Pro high enough to clear six inch roots and clear rocks at my cabin. I have had to replace the battery twice, the gas tank twice, the fuel filter and gas line once , one of the front tires, and of course several blades due to hitting rocks.
I paid $2000 for the Poulan Pro back in 2001, and $1700 for the 24 HP Husqvarna two years ago. The Poulan has a 20 HP V-tech engine that always starts right up. I have to crank on the 24 HP V-tech engine in the Husqvarna several times to get it to start the first time, if the mower sets up any time at all.
I do like the foot speed controls on the Husqvarna better than the hand speed control on the Poulan.
Your videos are quite helpful for maintaining the Husqvarna tractors. The one on modifying the plastic covers over the spindles was helpful in being able to clean the debris out. For now, I'm using the Husqvarna at my home in the city and the Poulan at our cabin. I hope I can keep both mowers going several more years.
Thanks for watching, Jack! I don't know of a way to raise the max deck height. You can gain a little extra height by tightening the deck support bar on the front of the deck. I agree, it seems like they should have allowed for a greater range in deck height adjustment.
Any way to check the oil in the transmission/rearend. I have heard it is wise to change the oil to a better oil than what was put in at the factory(?)
Thanks for watching, Paul! In mine, the transaxle is sealed and can't be checked.
❤
Thank you for watching!
Thank you so much sir for taking time to help us all. Is there anyway to turn override reverse key control?. I have to turn my key further right to go in reverse. Once again thanks i just subbed
Thanks for watching, Andreon! I'm not sure I fully understand your question. On my mower, once I start the engine and it is running, if I turn the key one click counter-clockwise, I can have the blades engaged while going in reverse. Please let me know if that doesn't help.
@@dwcoffey yessir thank you for the quick response. I think its called the pto reverse switch. If i try to have blades engaged while going in reverse my engine will cut off unless I continously hold my key further clockwise.
I see. Yea, that's different than mine and I'm not familiar with how yours is set up. I'm sorry. Once I set my key switch to the proper setting, I can go forward or reverse and keep the blades engaged, no problem.
Hey - Can you make a video on leveling the deck?
Thanks for watching, Michael! I talk about it briefly in this video but I will try to do a more comprehensive video on adjusting and leveling the deck. Thanks!
Dennis, Have used your great videos a lot. Have the same Husq YTH like your model. Rear wheels locked up after I made a quick stop & set parking. Any suggestions on what should look into?
Thanks for watching! The first thing I'd check is the drive belt. Sounds like it might have slipped the pulley and wedged under it. If not, see if you can move the wheels with the freewheel rod pulled out and the parking brake released. If you can, but it won't move when the forward or reverse pedals are depressed, you may have a transaxle problem.
Thanks Dennis. I'm going to check that. Gotta get on it as grass is starting to grow in my northern clime despite some flurries today. Don't want to push mow an acre even though could use exercise. LOL
I have been watching all your videos on these rider. Doing my home work/ research we are looking at buying one from Lowes. 42"or46" deck. Not sure yet. So far all I have heard is how good they are. Only problem is our back yard has a 30 to 40 somewhere around that degree slope runs the width of the back yard. Right now we have someone cutting it because of my health 1.5yrs ago had cancer but so far it is gone. And he use a zero turn mower and it does fine on the slope mowing width wise on the slope . Do you think these rider can handle it too? Sincerely Roger H.
Hey Roger, thanks for watching! Congratulations on winning the cancer battle so far! That is great news. No sir, I would not want to cut across a 30 degree slope with this tractor. A zero turn has a much wider wheel-base, so would be a lot more stable. I have slope that is about 30 degrees in my backyard. I can cut up and down the slope with no problem. To cut across the slope, I have to hang about half my butt off the seat on the high side...I'm 6ft 215lbs.
Hey Dennis, I have a problem with my Husqvarna yth22v46 the height of my deck is way off, I put it on the highest position which is 6 and it cuts way too low as if it were on position 1, I can't use any other position because it will dig in all the way to the dirt. Any advice on this?
Hi Louis, thanks for watching. The best first thing to try is to tighten up the nuts on the front support rod on the deck. It is on the front edge of the deck and goes through a bracket on the bottom of the front of the tractor. There should be 2 nuts on it, one is a lock nut. Loosen the lock nut, then tighten the other. Then re-tighten to lock nut. That should raise the deck's overall height.
Hey Dennis I need help with the linkage set up on the carb. I don’t know how to put it together. Can you post a couple pic of yours or do a video on the carb? Need it today lol
Hi Carolyn, I'm sorry I didn't see your comment until today. YT doesn't give me the option of posting photos in the comment section, but I'll do my best to check it tonight after work and post a photo to my instagram feed. I'll let you know here if I'm able to do it (not sure I'll get home before dark to day) :)
Mine is pouring fuel out at the bottom of the air filter so it got dark so I can't see where it is coming from but has been in storage for 2 years but I mowed the front yard 2acers and took lunch came out and it starts pouring fuel
😊👍
Thanks for watching, Christer!
@@dwcoffey than you very much 😊👍🌹
I have a YTA18542. When trying to purge the transmission, it’s seems this model doesn’t allow the freewheel to stay engaged once the brake is pushed in. Any other ideas to fix a sticking forward/reverse and debris has already been cleaned out?
Thanks for watching, Andrew! I'm sorry, I'm not as familiar with t he YTA models as I am the YTH models. The transmissions are different, so I'm not sure how to tackle the YTA.
Mine doesn't have zerk fittings on the front wheels(under the rubber covers), but there are holes there like they could accommodate zerks if I had them. You think I could add them if I got some from an auto parts store? Model: YTA 18542. Also, apparently the spindles are non-lubable too, wonder if there's a way to add zerks to those as well? I haven't investigated enough to see if there are holes like the wheels I mentioned above. Thanks for the video.
Hi Alan, thanks for watching. I'd try to clean out the holes on the wheel hubs and see if they are threaded....thye should be. If so, you can definitely add zerk fittings and grease them. If not, you can take the wheels off the spindles and grease them manually (see my other video for removing the wheels: czcams.com/video/clgeR9Pvex4/video.html ). Same for the spindles.....there should be holes for the zerks and they should be threaded.
@@dwcoffey Thank you. I'll check them out. I know Tractor Supply carries zerks(of many sizes) and I'd assume an auto parts store would too. Thanks again.
Yes, you are right, they come in different sizes. The most common thread size is 1/4-28 tapered thread...this would normally go into a 1/4-28 straight thread hole....kind of like tapered pipe fittings.
@@dwcoffey Thanks again Dennis. After further investigation(this mower is new to me) I found zerks on the inside of the front wheels, so now I just need to deal with is the spindles.
You know, I've seen that before. Somebody doesn't look for the zerks before they mount the tires and put them on the wrong side out. Those tires are non-directional, so if you ever take them off, you can just turn them around and get the grease fittings on the outside. I have a video showing where I replaced my fronts with flat free tires......it shos how to remove and replace the tires if you need any help. czcams.com/video/clgeR9Pvex4/video.html
Thanks....glad you found them!
We got a Husqvarna YTH184H
That's great! I hope you like it as well as I do mine. Thanks!
Do you run your speed throttle on high when you mow “
Thanks for watching, Rick! Yes, I do. Most small engines are designed to run at best efficiency at full throttle, so unless I need to slow the blade speed down for a particular reason, I run at full throttle.
What can be done to get the most power out of that 22 hp Briggs ? Looking to make the same tractor as yours into a realistic backhoe set up. No hydraulic all linear actuator and welding . All electrical will be run to there own battery
Hey Mike, thanks for watching. There are several things you can do to get more power out of a small engine....some more expensive than others. You can adjust the carb, gut the muffler, adjust or remove the governor. All pretty easy to do and will gain 2-4 hp usually. Possibly re-jet the carb, that would pick up significant gains, especially with the right replacement plugs. Then you could get into serious mods, polish the head ports, rebuild with racing parts (check out Carrier Performance and similar companies for racing parts). Sounds like a cool setup you are planning.....keep us posted. You should consider videoing the process and posting the vids. I'd sure watch it!
is there an adjustment for the brake on these tractors? I have the YTH2448 and it doesn't really want to stop all that well lol
Thanks for watching. There is an adjustable brake...the cable and brake adjustment is on the right side of the transaxle. There is a brake operating arm, a spring, an adjusting nut, a jam nut, and then the cable. Here's the procedure:
TO ADJUST BRAKE
Depress clutch/brake pedal all the way down and engage parking brake.
•
Measure distance between brake operating arm and the jam nut on brake rod.
•
If distance is other than 1-9/16", loosen jam nut and turn adjusting nut until distance becomes 1-9/16". Retighten
jam nut against adjusting nut.
IF you have to adjust that measurement to much less than 1-1/2", you may need new brake pads.
@@dwcoffey thank you