This is not my usual content-video format. But I did this job recently, and I figured someone out there might need it. Also it was a long time ago I did a dedicated how-to video. 👍
Thank you. Just finished this job on my 2012 XC70 T6. Excellent instructions and it was pretty easy with a little crowbar jack help to get the bolt back in.
This video was great! Both rear and the left front coil springs are broken on my 2015.5 XC60. I'll definitely repair the rear springs myself thanks to your video. Do you have a video for replacing the front coil springs?
Sjukt bra! Jag är amatör men detta ska jag ge mig på själv efter denna videon! Lesjöfors fjädern du monterarde, är sen hårdare än standard? Ska dra husvagn och svårt att hitta vilken man bör ha. Tack!
Just did this. Read the ride height for torquing bolt from hub center to top of fender should be anywhere from 380 to 480mm. Do you happen to know. ? Thanks
This is not my usual content-video format. But I did this job recently, and I figured someone out there might need it. Also it was a long time ago I did a dedicated how-to video. 👍
No one but a mechanic appreciates how we clean parts that no one sees or will just get dirty again!
Thank you. Just finished this job on my 2012 XC70 T6. Excellent instructions and it was pretty easy with a little crowbar jack help to get the bolt back in.
Glad it helped 😊👍
Pedagogiskt och underhållande som vanligt, snyggt jobbat! :)
Tack så hemskt mycket! 😊😊
Interesting! I never knew a 2WD XC70 existed. Thanks for the video!
Great job, great video , i will be ready next weekend to do same job , on my xc 60 thanks
Trevligt och tydligt format, de gillas! :)
Tackar!
Perfekt, jag behöver demontera bakre fjädrarna för att byta lite länkarmar och det visar ju sig inte alls vara lika svårt som jag trodde. Supertack!
Vad kul att videon kommer till användning. Tack för kommentaren! 😊🙏
Mycket snyggt jobbat som vanligt
Excellent video!!!
Thank you! I love your videos 😁👍
Great vid, thankyou for your time ..
Thank you so much 😊
Tack för videon 🥳
Inga problem, tack själv för kommentaren! 🙂👍
Hello a great job perfect 👍👍👍greetings from Germany 🇩🇪 👋👋👋Kai🙏🛠
Thank you so much Kai! 🙏😊
Good and careful job!
Thank you Sir! 😊
Klockrent, tydlig utförande 👍🏻
Tusen tack! 😊😊
This video was great! Both rear and the left front coil springs are broken on my 2015.5 XC60. I'll definitely repair the rear springs myself thanks to your video. Do you have a video for replacing the front coil springs?
Thank you! 😊
Unfortunately I don't. :/
Sjukt bra! Jag är amatör men detta ska jag ge mig på själv efter denna videon!
Lesjöfors fjädern du monterarde, är sen hårdare än standard? Ska dra husvagn och svårt att hitta vilken man bör ha.
Tack!
Tackar, denna var samma som original. 👍
@@ejoautovideos tack för svar 👍
Just did this. Read the ride height for torquing bolt from hub center to top of fender should be anywhere from 380 to 480mm. Do you happen to know. ?
Thanks
Ska göra exakt samma jobb på min Volvo S60
Tvätt video snart då? :D
Is there a way to tell when the spring is broken?
Thanks, good video
yes. it's in two pieces.
Enkelt 👍😋
😁😁
👍👍
Ser det likadant ut på en XC60? 😊
Väldigt likt har jag för mig. :)
👍
Super rusty. Poor thing
For a swedish car it's not that bad.
The salty winters really takes a toll on the cars here. :/