AD-1 Amp Dyno CT Sounds CT-3200-1D by Jones Subwoofer Solutions JSS
Vložit
- čas přidán 31. 12. 2021
- Get your CT Sounds amp NOW by shopping through my affiliate link, and help support the channel!
Click here: www.ctsounds.com/?ref=5hnjvzhlw6
AD-1 Amp Dyno CT Sounds CT-3200-1D by Jones Subwoofer Solutions JSS
Manufacturer ratings:
3200w RMS @ 1 ohm
1600w RMS @ 2 ohms
900w RMS @ 4 ohms
Dyno bank consists of
1x 135ah CMAX, no active charging.
Thank You For Watching!!!
Please LIKE, SUBSCRIBE, and hit the BELL, so you know when we post a new video!
See you next time!
------------------------------
Stand by Anno Domino Beats
Licensed under a Creative Commons Attribution license (creativecommons.org/licenses/)
Promoted by:
CFC czcams.com/channels/QLZ.html
✔DOWNLOAD THIS TRACK : bit.ly/2IHcMxA
------------------------------
HOPE - Instrumental ( Free For Profit Use )
Prod. by Free For Profit Beats ✪
Licensed under a Creative Commons Attribution license (creativecommons.org/licenses/)
Promoted by: CFC czcams.com/channels/QLZ.html
------------------------------
Voice by KV / kvmusicprod
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/a_voice
Music promoted by Audio Library • Voice - KV (No Copyrig...
------------------------------
Over You - Atch / atch-music
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/_over-you
Music promoted by Audio Library • Over You - Atch (No Co...
------------------------------
Flow by Nomyn / nomyn
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-_flow
Music promoted by Audio Library • Flow - Nomyn (No Copyr...
------------------------------ - Auta a dopravní prostředky
It just really makes me happy that there are actually videos about things like this these days because back when I used to build stereo systems in my vehicles Amps were soo ridiculously OOVVEERR Rated & Terribly Under Powered that you just NEVER knew what you were getting until you hit the play button and were seriously letdown and upset when the Subs barely moved lmao. 🙃
Right!!! I had a US Amps that was "rated" 250 watts, i ran 3 twelves with it and managed a 150db burp on the meter. Pretty good for a two-fiddy. Paid a fortune for it in 1995 though.
@@Hammerback972 Back then when I kinda fell out of it, well I had gotten a wife is what happened lol, but Amps were changing finally and everyone I knew started getting a Brand called Zapco which were true power and clean sound too. But now things are just insane like Taramps, CTSounds, SKar, and others I never heard of that are nuts too. I'm not sure what changed but it did.
Hell yea! I won one of these in a contest they had before they where released!
Out freaking standing, keep it up.
Thank you sir
WOW I LOVED IT!! Way better than I was expecting.
Thank you for the review
This convinced me to go all ct sounds!
Wow...impressed
Wow, I was not expecting this!
That thing is way heavier than it looks. It's pretty compact so it will deceive you. I just got mine in for a pair of Meso 12's and went to pick it up like it was 10 or 15 pounds. Feels more like 25 or 30. Heavy inspires confidence in my mind.
Ct Sounds makes real nice amps they always put out the rated power and then some. I run the Messa series for my subs and comps and never had any issues.
Dam good numbers love your videos jss
I have this amp as well as the 2000D and this thing is a beast super clean sound never heats up and shut off i have it on 2 Meso`s 12s and they even love it great amp love it and would love to see you test the CT 2000 D and see what it does 👍👍👍👍👍
Thanks for the feedback. I'm getting TWO Meso 8" 2 Ohm and this Amp. Looking fwd to it, the enclosure I'm custom building myself.
I have several of the AT series 4 channel amps. They are 3 years old now and have given me no problems. Running the 150.6 and the 200.4. Not sure if they make the 200.4 anymore but it’s been a great amp and sounds good too. Only problem is finding mids and highs that will handle the amps.
Great video sir keep up the good work 👍 🙏🙏
Thanks for watching!
Awesome review!!!
Im going to get one of these
I also have this amp pushing a 2022 CTSounds 3000 watt Exo 12.... It slams 🔥💯
Ct. Sound amps make easy power!!! Light work
I keep seeing dynos on this amp and it’s a performer!
Nice👍
I will be running it onto team resilient sound 18s
Ya right!
Good video
The entire new CT line are bad ass every one of them does overrated and you can’t blow them up. The power supplies are over built in them that is why your dyno running the way it was. Just clean power going into that out of the power supply of that amplifier.
That efficiency at 1ohm is nice!!! About 20% more efficient than similarly priced amps out there.... Ok, I see you CT....
This series of amplifier does everything it says it does ,
This test got me to become a local dealer for them, very impressive gear.
The amps make good power they're usually under rated a long time ago people used to have problems out of them the PC board used to move around on the inside I hope they fixed that problem
Yep they did that whole company had an upgrade Coleman had had great products expect he let them demons get to him that when the company started downgrading there products..but they back in the game
Totally new design and the board is fixed firmly in place
"It's just making power and doesn't clip" .....every bassheads dream. Lol
I mean... That was a first for me 😂
@facekicker So I got a ct sounds 80.4 and a ct sounds 1500.1 and when I went to set the gain I turned them both up and didn't see clipping on my oscilloscope, I didn't know what was going on, I still set the gain around or below half way cause I didn't know if something was off
@@jonathanlarsen4771 I have 2 ct2000.1d strapped and mine don't clip either pushing a meso 12 I also have a ct150.4 on 2 sets of meso 3 ways and it doesn't clip either
Almost like "She has a perfect body, lots of money, enjoys cooking and bringing me beers. But..she never complains..." Not mormal. 😂
I still have Audio Technix amps. Did they ever remake the white cases for CT sounds after they had to change the name?
The very first run of CT branded amps were identical to the ATs save for the logo itself, with rounded white case and LEDs. After that, they got a new look.
Had to pick up one of these amps because of this video lol.. any recommendations on a 4500 watt Korean board amp?
Skar SKV2-4500.1
Hi. Will the hifonics bg1900.1 you dyno tested good match for my MTX terminator dual 12 500w rms, wired at 2 ohm, 1000w rms - 2000w peak vented box or would the BG-2200.1D be better?
That amp looks solid!! Thanks for doing a dyno with it, I've been curious about CT sounds because they got a good price and they don't lie about the ratings like cheap knock off brands do.
Where do you live?? In the US?? Wow
Right on Brother!! CT Audio products are what's being called Budget Car Audio, but with that being said do not let it Devalue the name, honestly in my opinion what they're doing with the Ads are Killer Marketing Tactics! Their Products are Very Affordable, as well as Properly Rated, if not slightly Under Rated , Another Awesome Solid and decently Priced brand you may wanna look into is called TARAMPS. Enjoy, ttyl
@@ascension4444 stay away from Taramps they tend to catch fire a lot. Want a badass half bridge amp company that's affordable look at Belva
My Belva BB5000D which is a 3k RMS amp ran me $250 and is a tank. I've already fried a ground wire upon installation, had my live wire pull free from the terminal on the amp, ripped the tinsels out of my Sundown Xv2 10 and it's still playing. If I had taramps I would have had a fire with each issues I've came across
I think it's going to do 3678rms certifed.
My question is would that amp get hot playing music for lest say a good drive? I have to upgrade my amp because I don't like how hot it's getting. Not melt the back seat hot but hotter than I would like it to get.
Not at all
Can they run at .05 ohm ???
I have a brand new one and haven't used it yet
I’m probably gonna get one to tinker with. How you installed it in a car yet?
Have you plans to test Apiel amps?
Can you please dyno a Fosgate t20001bd,can’t find not a one vedio
Would anyone recommend this amp for two sundowns x12 v3’s?
This would be a great mate to a pair of Xv3s, D1s in series/parallel would get the most out of it.
Can you guys do a in depth look at your subs?
Coming soon yessir
I would like to see you run Crescendo 17K
I ran the Crossfire 17k, we were past the edge of the Dyno limits the whole time and most the results were simply "OVER".
Great video does anyone have a nemesis audio amp dyno I can't find one
Got a few coming
Awesome. Can these amplifiers be strapped
Not strappable
Do you think this would be able to push 4 8’s rated 600 rms each
Yes
How u think this will do at .5?
There's a chance you'd see protection circuit, but with proper electrical it should be fine with rise over 1 ohm.
@@FacekickerI'm going to buy one and see what's up I had the Ct sounds 2000.1 at .5 and it was doing good
Looks like a team pie amp
Definitely isn't. I have their whole line up and this is nothing close.
I figured the amp would do rated and probably 100 or so over, but I was really surprised how much over and did the efficiency. Was that good.
One thing I hate about a lot of amps when they have a subsonic filter is they don't have off at the end of the potentiometer they have like 10 or 15 hertz this one has off up to 50... Nice
I base CT sounds on their subs and I would say they're a middle of the road brand so it's nice to see they put a quality builder behind their amps.
What was the price point for this beast?!
I paid $399 on preorder but they're currently $340
Hey I have two Rockford fosgates T1D212 wat amp do I need plz help guy told me 4000 amps I was about to go cheap and buy the autotek 4000 amp til I seen your video
800 watts rms/1600 watts peak on each speaker
I'd put anything reliable that does 2-3k on them and feel good about it. The CT 3200 is a good option as would be Taramps Smart3k or even MD3000 2 ohm model.
It’s going on a boat does that matter? I should go class d is that correct??? The speakers have a option for 1 or 4 ohms wat does that mean and if I have them both one 1 is that why I would get a 2 ohm amp?
@@carviews9866 as long as the boat has enough battery support it's no different than a vehicle. The subs are D2, you would set the switch on each sub to 1 ohm, then wire the two subs in series for a 2 ohm load at amp.
I wish u was in Michigan I would pay u to hook it up and know it’s right 🤦🏿♂️ thanks tho
I want to send you an 8 channel amp to test. Do you have enough dummy loads to load all channels?
I actually have more on the way, once they arrive, yessir.
@@Facekicker Sounds great. Can you send me an address. I will pay for shipping both ways.
@@rickdodson5252 shoot me an email support@jonessubwoofersolutions.com
I don't think you're setting gain correctly if it's clipping during the certified test.
The certified test literally requires you to bring the amp to clip, the dyno stops reading at 1% clip or distortion and that is your certified number.
The very brief flash of the red light as power ramps up is from the resistor banks being loaded and not from clipping.
342 AMPERAGE ??????????
Takes power to make power
Is it from ct sounds or amazon 🤔
I preordered mine directly from CT Sounds. Get your CT Sounds amp NOW by shopping through my affiliate link, and help support the channel!
Click here: www.ctsounds.com/?ref=5hnjvzhlw6
Test one that they didn’t send you.
I have, with equally good results.
These CT amps don't really get hot they play for a while and barely warm
Is it a China amp?
I'm fairly certain it is.
You know wat amp I wanna see that's literally no where on CZcams the crescendo bc4k
I can try to track one down
There have been many ct sounds amps on the dyno in the past. They usually do good numbers but sadly I feel they are over priced unless they have come down.
I just bought 2 2000.1 for 204$ each to the house. That doesn't seem over-priced.
@@DAMAGE-X- depends on which line u buy from them. Probably the chinease line of amps. I want a Korean amp. Everything has went up. Look up their older white Korean 7k. I think they only saale the smaller model now but it's way overpriced
I bought 2 of the amps from the AT line. The only line higher is the team amps. They weren’t over priced and have been running strong for 3 years now. The only amp I have that’s over priced is the JL 1200 HD!!!
its a bad thing this amp doesnt detect distortion u cant properly setup your system with this amp clean
I think you misunderstand.
@@Facekicker yes i did lol i actually have this amp wired to .5 it wasnt detecting distortion until i cranked up lpf half way for some reason its real delayed from 50hz and up
This amplifier is out of stock for a reason.............
Do you know why?
I don't, but I believe they just shipped all their preorders and may be waiting to restock.
@@Facekicker It was just a quick observation on how popular this Amp is due to your Test. Price is competitive for now and won't stay on the shelves for too long.
@@rogerdjs I didn't even notice if it was in stock before but that honestly wouldn't be surprising!
Excellent results I think!
@@Facekicker I agree. I checked several sites and they were out of stock but I think CT has availability. I would purchase at least one but I would have to redo my floating Template, Rewiring of my other amps and devices just to fit this bad boy. Mach1's have limited space in their trunks and I'm trying to keep the clean look. But seriously considering this and a CT-150.4D if it delivers as well. Keep up the good work! And keep them honest....