Support/JOIN : czcams.com/channels/aQRmy4Beww-riYiV44qjhg.htmljoin My Short Guide about EPOXY RESIN: www.amazon.com/Short-Guide-about-EPOXY-RESIN-ebook/dp/B07ZWKS2PV Vacuum Chamber: resiners.com/?ref=YDsesKJBhf-Pu
A wonderful resin creation a beautiful sentimental piece great for the living room, desk or a nice gift to mother or female relatives. Lots of love and blessings.
Gorgeous! I love how you built the flower! Egg suggestions: giant M&M, baby chicken or another bird, alien embryo, miniature solar system that lights up, rainbow with a pot of gold.
If you're looking for egg ideas, maybe you could do a birds nest in an egg with a pretty momma bird and her colorful eggs. Or a cat or some other kind of cute animal curled up sleeping in an egg. Anything nature or animal themed is always fun. Thank you for the video and sharing your art, came out beautiful, as always.
I love your clov😂er flower in the egg, it’s beautiful, thank you. I’d like to see an aquatic themed eeg, I think it’d look great. Or birds and clouds x❤
Another great piece 🐣👍👍 I especially like how you make use of what mother nature supplies. Maybe next time you could have the Easter Bunny spreading the eggs. Thanks so much for your time and the video to share with us. See you next Friday.
1st watcher here & I cannot close my jaw. I am seriously stunned at your beautiful artistic talent. Just WOW. Now I’m off to watch your other videos. ❤
2 ideas 1) do 1-layer pour-over of egg *before* molding to see if you can get a glass-finish out of the mold, without having to sand! 2) embed all-thread or bolt to make cane-topper (or gear shifter, or knobb)
More things inside eggs! :D I watched some of your older videos with little landscapes inside eggs; more of those without the shells :) More flowers, colorful pebbles, seashells, other items inside clear or tinted eggs
That was beautiful, looks like you could do a lot of possibilities with the egg mold and now you don't have to be quite as careful as when you have to use the shells as the mold. Very nice 👍👍👍
Hello there! So, while I was watching your video I was thinking that a resin egg with some decorations and maybe a sprinkle of colored mica powder might be the perfect place where to put a led! Or, even better, three or four glowing leds, you know, like those that are often used during christmas time. Just put one led in one egg, make four of them (or how many you want, of course) and you can have a very particular glowing and "breathing" lamp!
Very cool project! I don't know how many times I've watched your into, but I just noticed that the watch was upside down. LOL! I think you could use that egg form for several other projects--maybe, if turned on its side, it could be made into an eyeball like the Eye of Sauron.
Beautiful. Nightlanp bulbs are another option for the egg form. Or dragon eggs. Jewel eggs. Or take some inspiration from the famous Faberge eggs. I wouldnt put mechanic inside. But maybe a windjamner or rabbit.
Could you please explain to us how the resin didn't leech out between the two sides of the mould when you poured the resin in there ? This us a beautiful creation. TYSM for sharing !!!
Im just wondering now if the techninuqes used in metal cast like spin trap and so on. Would help to remove bubbles also with a resin cast like this. Although those that have a vacume chamber can easily combat it. And many other ways at least to help kill bubbles.
What would happened if you have done a little hole on the egg, put out the content of the egg and fill it out with resin instead of doing a silicone mold? I know you have now the mold but wonder if that would had worked also
Support/JOIN : czcams.com/channels/aQRmy4Beww-riYiV44qjhg.htmljoin
My Short Guide about EPOXY RESIN: www.amazon.com/Short-Guide-about-EPOXY-RESIN-ebook/dp/B07ZWKS2PV
Vacuum Chamber: resiners.com/?ref=YDsesKJBhf-Pu
@jedrek29t If you can produce (haha pun not intended…) a chicken with a bewildered look, that just barely fits in the egg! That’d be a hoot!
You made this video 10 hours ago, but it shows that you wrote your comment 3 days ago! How is that possible? 😮😅
City in the egg, maybe.
A wonderful resin creation a beautiful sentimental piece great for the living room, desk or a nice gift to mother or female relatives. Lots of love and blessings.
Thank you very much!
What a gorgeous creation for Easter! So beautiful!❤
Thank you so much!
11:50 ..., YEH SIR ✔️🪻🙏
Прям не то, что чемпиона прям аж мастер такого делает такое рукоделие, какое молодец человек сделал такую красоту!
Gorgeous! I love how you built the flower!
Egg suggestions: giant M&M, baby chicken or another bird, alien embryo, miniature solar system that lights up, rainbow with a pot of gold.
Thanks for the idea!
If you're looking for egg ideas, maybe you could do a birds nest in an egg with a pretty momma bird and her colorful eggs. Or a cat or some other kind of cute animal curled up sleeping in an egg. Anything nature or animal themed is always fun. Thank you for the video and sharing your art, came out beautiful, as always.
The bird nest in an egg idea is GENIUS
I love your clov😂er flower in the egg, it’s beautiful, thank you. I’d like to see an aquatic themed eeg, I think it’d look great. Or birds and clouds x❤
Noted!
Wow this is beautiful! I love watching your videos so inspiring
Another great piece 🐣👍👍 I especially like how you make use of what mother nature supplies. Maybe next time you could have the Easter Bunny spreading the eggs. Thanks so much for your time and the video to share with us. See you next Friday.
Thank you
Beautiful. That's something special to get in an Easter basket.
😊
какая красота =💯👍🌹🤍💙
1st watcher here & I cannot close my jaw. I am seriously stunned at your beautiful artistic talent. Just WOW. Now I’m off to watch your other videos. ❤
Thank you. I hope you like them
This is EGGCELLENT 😎🐥🐤🐣
2 ideas
1) do 1-layer pour-over of egg *before* molding to see if you can get a glass-finish out of the mold, without having to sand!
2) embed all-thread or bolt to make cane-topper (or gear shifter, or knobb)
I think it is doable
@@jedrek29t 🥰✌
Nice job and that’s a beautiful Easter egg 🥚 resin art. And happy Easter to you🐣 and see you next Friday.
Same to you, see you next Friday
this is so pretty. As for suggestions for the future egg projects, Kinder Surprise jumps straight to mind with a little toy inside
👍😉
good idea!
the blue hardener is great and all...but i really prefer the red one!
A phoenix egg, with a little fire inside would be cool
INCREDIBLY CREATIVE...AS ALWAYS! You never disappoint! ❤
Thanks
Szép munka!👍🏻🤠 Boldog húsvétot!!🐰🥚🍻
Köszönöm. Boldog húsvétot
So pretty. 😊
More things inside eggs! :D I watched some of your older videos with little landscapes inside eggs; more of those without the shells :) More flowers, colorful pebbles, seashells, other items inside clear or tinted eggs
😉👍
This one is my favorite ever, amazing.
Thanks 😉
How about a baby bird right before hatching? That would be so cool!!!
👍🏻👍🏻👍🏻❤️❤️❤️
Cool idea
This is just so beautiful. How about a snake or turtle inside the egg ?
a rainbow with clouds could be cool in the egg mold!
Cool idea
Happy Easter Jedrek & family x Love it as always .💙
Thanks so much
Absolutely gorgeous! Eggcellent work!🥇👌👍👍👍👍
Thank you so much 😀
@@jedrek29t you’re so welcome.😁
That was beautiful, looks like you could do a lot of possibilities with the egg mold and now you don't have to be quite as careful as when you have to use the shells as the mold. Very nice 👍👍👍
Precioso!!! Te a quedado muy bonito felicidades ❤
🐣
Hello there!
So, while I was watching your video I was thinking that a resin egg with some decorations and maybe a sprinkle of colored mica powder might be the perfect place where to put a led! Or, even better, three or four glowing leds, you know, like those that are often used during christmas time.
Just put one led in one egg, make four of them (or how many you want, of course) and you can have a very particular glowing and "breathing" lamp!
Great idea!
@@jedrek29t glad you liked it 😊
This is amazing!! Beautiful ❤
How ironic would it be to put an Easter bunny inside an Easter egg?
Cool idea
I also think its cool
That would be awesome!
Love it
Loveliness! 😊
Pretty ❤❤❤
رووووعه تسلم ايدك
Absolutely Beautiful!!👍
Thank you so much 😀
Beautiful
Wow that is absolutely stunning, so fiddly to do yet you make it look so easy ❤
Thanks
That's really pretty.
Thanks Patricia
Pięknie wygląda 🤩 👍 wesołych świąt 🌸💖
Dziękuję. Wesołych Świąt 🐣
Awe. Beautiful. I love this. Happy Easter 🐣.
Happy Easter
I can see using this method to make beautiful Christmas ornaments.
Great idea!
So beautiful! Happy Easter!
Thank you! Happy Easter
Absolutely beautiful 😍😍
Thank you! 😊
That is so beautiful!!
Thanks
Un très brillant travail du fond du cœur bravo champion
Merci de votre attention.
That is so cool love it!
Thank You Laura 😊
Really really good and amazing
I love your hard work Soo much
Keep it best of luck 🥰🥰🥰🥰🥰❤️❤️❤️💟
Thank you so much 😀
Such a sweet Easter egg idea. I couldn’t have thought to hard boil the egg first! Man I would have a mess on my hands
😁👍
Amazing so cute!!
Thank you!!
Lindo demais amei obrigada Deus abençoe e proteja sempre
Very pretty
Thank you! 😊
A dragon!
That is so very pretty.
Have you done a hand putting lipstick on lips yet? I think that would be cool.
Interesting. Thanks for the idea
How about a little bunny hiding inside a flower bed peeking out ? Nice one , se you next week 👍😊
That would be cool! See you next week
Hermoso trabajo como siempre !!
Gracias Sonia
Very cool project!
I don't know how many times I've watched your into, but I just noticed that the watch was upside down. LOL!
I think you could use that egg form for several other projects--maybe, if turned on its side, it could be made into an eyeball like the Eye of Sauron.
Cute 😊
Very pretty ❤
Thank you! 😊
Brilliance just Brilliance
Thanks
Excellent project... I was thinking a shift knob for my 1967 Chevy pickup... maybe holding dice? Thanks again mate...
That would be cool!
Как красиво получается, ну надо же?
That's gorgeous 🥰🥰
Thank you! 😊
It will be amazing to see a dinosaur egg lamp
Lindo!! Parabéns pelo trabalho.
Obrigado
You have created such a lovely flower in the egg for easter. How about a chicken or a rabbit in an egg? Can't wait to see what you create next.
Cool
Super pozdro ze Śląska 👊👍
Dzięki, pozdro 👊
Beautiful. Nightlanp bulbs are another option for the egg form. Or dragon eggs. Jewel eggs. Or take some inspiration from the famous Faberge eggs. I wouldnt put mechanic inside. But maybe a windjamner or rabbit.
Lo ame ❤❤❤❤❤
Wow good job to you 💯💯💯💯
Thanks
Wow👍😀❤
😊🐣
You could do a baby chick hatching out of an egg in the egg mold! I think that would be really cute
Cool idea!
I would love to see a Jellyfish inside the Egg!
I'd love to see a baby dragon inside the egg
Przepiękne 😊. Pozdrawiam
Dziękuje
@@jedrek29t 🙂
Happy Easter 🐣
Happy Easter 🐣
Love it ❤❤❤😊
😉
It would be cool with a chicken inside the egg. Happy Easter 🐣🐥🐇
Happy Easter
11:50 ..., YEH SIR ✔️🪻🙏🚩🔱📿
😊
this is the best channel! maybe put a fake eyeball in an egg? that might be cool LOL
Interesting
Very nice ❤
Thanks
Nossa ficou uma peça muito bonita , parabéns .
Obrigado
Wunderschön ❤👍
Danke 🐣😊
@@jedrek29t Frohe Ostern wünsche ich dir
Could you please explain to us how the resin didn't leech out between the two sides of the mould when you poured the resin in there ? This us a beautiful creation. TYSM for sharing !!!
silicone sticks together
I love the end result. Do you think, it would be possible to create a galaxy inside this mould?
I think so
Could you make a Resin where there is a hang glider flying between mountains? 🙂
Cool idea
Wonderful
Can you build a nightlamp with 3-4 eggs and the theme forest?
Ameei ❤️ ❤️ ❤️
😊
ДУЖЕ гарно.Неймовірна краса.❤🎉
Да хуйня
Muito lindo!!!
Obrigado
Really cool creation 👍 how about an inside view of a 'raw' egg?
Transparent egg? 🤔
@@jedrek29tyeah...or even an egg inception....an egg-ception if you will 😅an egg in an egg in an egg
❤
This is gorgeous...just one question Jedrek.... HOW do you get to MIX/pour resin without ANY BUBBLES? LOL
I use this www.amazon.com/dp/B0C53M3D86?maas=maas_adg_872F0B36DC56EBA6088C08F2C937F034_afap_abs&ref_=aa_maas&tag=maas
You can make a same thing but 3 leaf clover please
Im just wondering now if the techninuqes used in metal cast like spin trap and so on. Would help to remove bubbles also with a resin cast like this. Although those that have a vacume chamber can easily combat it. And many other ways at least to help kill bubbles.
I don't know. But vacuum chambers are getting fatter. I use this one resiners.com/?ref=YDsesKJBhf-Pu
What would happened if you have done a little hole on the egg, put out the content of the egg and fill it out with resin instead of doing a silicone mold? I know you have now the mold but wonder if that would had worked also
I've already done that. Check on the channel 😉
❤❤❤❤❤❤
Gratulation to your Videos... can you say which molding silicone you use? The Name and Company you bought it
ELIETE - QUE COISAS LINDASSSS
Obrigado