82-92 Camaro Interior upgrades
Vložit
- čas přidán 27. 03. 2016
- Here I have posted a video of all the upgrades I have made to my interior so far, I still need to replace the seats and seatbelts. The seats i will be getting are black leather with red stitching and then i will also install black seatbelts. Hope you enjoy if you have any questions or if you have any good ideas of what else i can do please comment. thank you
Tools - amzn.to/3RDKKc4
Tools Continued - amzn.to/3TGssJJ
This has officially reignited my need for a 3rd gen. Thank you sir. Btw great job on that interior.
Thank you
Okay, I got my to-do list for my 92 RS!. Fantastic job, sir.
Great job! Thanks for the post! I just bought a 1988 Iroc t top and I'll be following some of you advice.
Roger Maldonado thank you and glad i could help
Very Nice Work! Looks Great
archiebite thank you
Thanks for the tip on the roofing tape. I'm getting ready to put new carpet in my 87 GTA and was going to buy a bunch of Dynamat. The roofing tape will save me some money.
ScarabChris thank you I’m glad you found it helpful. Ya the roofing tape will save you a lot of money when comparing it to dynamat. Just make sure to clean the dust and dirt off everything your applying it too
Thanks for the reply . Look forward to seeing some of the new videos !!
No problem at all. Thanks 👍
Phenomenal job
Thank you
Super dope video man nice car
Thank you!
Great video. I just bought an 88 IROC convertible with 56,000 miles. Interior is perfect, but stinks. I will probably have to pull it out and might follow your advice on soundproofing and love the idea for the sub box.
Thank you very nice sounds like a good ride. I'm sure you will get it cleaned up nicely.
Thanks for making these videos. I'm hoping to get back into a 3rd gen at some point and would like to do some updates as well.
Woodscraps1798 thank you I’m glad you enjoyed
Can the speakers pannels could be on leather?
Have you done an update video on this since it's been 5 years I was curious how it all worked out with the subs and leds n etc
I wanna take all my interior out and sand everything the same u did . What materials / sand paper do I need ? Thanks
Did a rear seat delete and now I’m going to build a ported box and put a 15 inch Subwoofer behind the passenger!🔥
Young C very nice!!!
good lookin center council ya got there..
the center council is the real center piece of the car wouldn't you say
ICE CREAM COW BOYZ yes i agree with you. and thank you
console,not "city council"
Hell thank you for making all these videos.!! Their great. I’m slowly watching all your vids here and there going to get started on my 1987 z28. It’s been sitting far too long. When you wet sanded what was the materials you used ? Thanks
Thanks glad you enjoyed. I'll be making more videos soon I need to do more to mine and get it on the road again. The wet sanding was just alot of water and high grit sand paper. I want to say I used 1000 to 3000. It's been along time since then. Then after that I used a primer/paint adhesive spray. Then after that I coated everything with a few layers of vinyl and fabric paint. Non gloss.
You are a 3rd gen beast sir
Antonio Jones haha thanks man
I'm working on my 3rd gen now. This gave me a great blueprint going forward
Antonio Jones very nice. I hope you have fun working on it. I’m really glad you found the videos Helpful!!
your microphone man good god
AAARRRGG lmao ya this is an old video and the voice over was using my computer Mic and it is garbage as you can tell haha.
What grit sandpaper did you use to scrape off the old paint? I have the same issue of the previous owner painting everything in the car (even the fabric parts too)
If I remember correctly I started with like 800 then 1000 then like 1200. I can't remember exactly but I know it was fine sand paper and I continued to soak the sand paper and wet sand it. I didn't get all the old paint off just a majority. Just Enough to get the paint to adhere good to the pieces.
Hey Tony, where did you get the 6x9 speaker plates from?
These are from scosche I believe. They were in it when I bought the car
You've sparked my desire for a Z28. Great job with the interior. I have so many questions about how you did this.
Thanks I appreciate it 👍
TonyTheTechnician any chance you remember what. The stuff you did/used? Like the carpet paint insolation lol.
@@Likes_to_spoon www.ebay.com/itm/New-1985-1992-Chevy-Camaro-Front-Rear-MOLDED-CARPET-Set-w-Padding-Pick-Color/202645211983?hash=item2f2e988b4f%3Ag%3AcP4AAOSwL89cpjV~&fits=Year%3A1992%7CModel%3ACamaro%7CMake%3AChevrolet&var=502723652062
www.ebay.com/itm/Heat-Shield-Insulation-Car-Sound-Deadener-Noise-Dampening-Insulation-36-x-39/184367400167?hash=item2aed2744e7:g:U-wAAOSwXCNfOfsX
What kind of gauge holder is that?
Mike Fouty if you go to eBay and type in carbon fiber swivel gauge pod. You will find them
I bought the precut carpet for the front of my '91 Camaro on eBay and asked a local auto upholstery what they charged to install it. They wanted $100 and I said hell no. Too make a long story short I would have paid twice of what they wanted if I'd known the hassle it took to install it.
OSUM C6 ya I know exactly what you mean. It was not fun or easy and mine still isn’t installed exactly how it should be. But now I know lol
Actually $100 doesn't sound all that bad, I know its time consuming. Carpet is on my list, I may see what local upholstery shops near me change. I'm thinking it might be worth it, I'd like to have brand new carpet but I just don't have all day to install it, we'll see.
idiot ,what the fuck is $100.now you probably have a car that looks like ass,spent 10 hours doing it and cut several corners..
What kind of steering wheel do you have the chrome one?
No I had a grant gt but now I have the cleetus mcfarland mpi steering wheel
Dude ive heard that aluminum tar paper offgasses toxic crap when it gets hot so be careful. Bad ass car dude
BackDraft_147_1333 thank you and mine has been fun for the last couple of years haven’t ever smelt anything but I will keep that in mind. Thank you
So here is a tip when finishing up upholstery...steam it! Takes out the wrinkles and makes it curve to the surfaces.:) Hope those seats are getting changed too! not a great colour at all!LOL
Lol yes indeed. They were swapped soon after this video was recorded 👍
How did you install the gauge pods? Scre2 them in, adhesive?
Nightall I did small screws
gotcha thanks man!
Nightall your welcome
What paint did u use for the plastic panels?
Chase McCleave its called Vinyl and fabric paint. you should be able to get it at any autozone, O'Reilly or advanced auto store. I started by wet sanding all the parts then used a coat of paint adhesive and then applied the paint. and it comes out very very nicely.
Nice video. Do you have one of you actually removing and replacing the seat belt retainers on the roof?
No I do not sorry.
@@TonyTheTechnician That's too bad. I have new seat belt mechanisms but I have no idea how to install them without destroying the headliner. Do you know who has one?
@@markthompson5803 I'm not sure. Hear is the only video I see and it's t tops. I would suggest pulling a pillars down. Then pulling back side plastics where the speakers are. Then slowly pull around outside edges. There will be clips holding it in. Here is the link for the video I found but idk how helpful it will be. Best of luck. Sorry I couldn't help more.
czcams.com/video/ftAsaEgoP6Q/video.html
Nice subie bro
Jeske Won haha thanks
Where did you get the insulation/what is it called? Links?
JasonMisterDude get the aluminum tar tape from Home Depot or Lowe’s. It’s used for patching roofs. Then the other insulation is the NASA insulation found on eBay.
TonyTheTechnician Awesome, thank you! I'm about to do this on my '82 Z28 (non-iroc)
JasonMisterDude glad I could help
How is the vinyl and fabric paint holding up after 4 years?
It has held up great only area I have an issue is the passenger door hangs and scraps the panel across the bottom but as soon as I fix the door and repaint it. It will be fine
Sound insulation worked great, I could barely hear ya!
Hey I have a third gen like u and im looking to update mine you got any tips where I should look
Hawksmotorsports
Camarocentral
Ebay ot Amazon
Summit racing
Thirdgenranch
Still restoring my 86 got the t top fixed and most of the rust patched
Pinkamena Diane Pie nice!! I just got mine moved into the new house and have the new trans but no tools yet to install it lol
Just go find one thats rust free. Thats what i did. Saves hours of time and money😀
Fkn dop great job
Jesus Gonzalez thank you
what are the dimensions of the box you installed in replacement of the rear seats???
sharissa jones I’m now home right now I’m traveling but when I get home I’ll try to get the measurements for you
How much to redo my interior in the trunk and bulid a backseat boc?
Everything black
I would say 30 or 40 in wood materials with screws. Maybe 15 in fabric and adhesive for the wood. So under 100. Then if you wanted all new carpet in the rear it's an additional 120
And to redo the panels it's probably 30 or so if you just wet sand the pieces and get vinyl and fabric paint and repaint them
Could you perhaps do a video on the box you built to replace the rear seats? I would really like to do that to my 83 Berlinetta
Reaper when I get the camaro to the new house I will try to make a video on dimensions and how I went about it
@@TonyTheTechnician that would be very much appreciated!
Reaper 👍🏻👍🏻👍🏻
take out the seat ,get a measuring tape and get creative.make sure it can be fully reversed
I’m working on a $150 dollar budget, is there any sites where I can find front and back carpet for my 82 camaro
Hmm I'm not sure about that price. I think I paid around 300 for both of mine together. You might be able to get some at hawks or find decent used carpet on ebay
@@TonyTheTechnician Ight thanks man, I’m just tryna get a old berlinetta up and running for fun
Hey man, can u send me the listing where u bought the seats, brackets and seat belts? I have the same car
Here in Cali we have Pick Ur Part auto yards and you remove what you need at decent prices. I've also bought tons of parts on EBay.
where did you get the carpet?
rocker123418 i bought my carpet off of ebay, you can either buy both the front and back piece as a set or you may purchase them individually.
TonyTheTechnician
Hey man the carpet is it acc? did you have the link to it maybe
Hey where did you get the carpet??
A lot of people use a company called “Auto Custom Carpets”. Made in USA.
Im confused. You did a great job but you ignored the back Wheel tubs? 90% of road noise comes from that part!
The wheel tubs already have an inch of padding on them.
I cant believe this exists.
What is the exact year of the car
Frosted Phoenix 53 1985
My third gen doesn’t have a trunk it’s just speakers
Haha very nice
How did you do your doors? I like that there custom.
Vinyl and fabric paint for the plastic and arm rests. Then I just bought some fabric and adhesive spray. Thank you
@@TonyTheTechnician thanks there like 200 hundred bucks a pop.
@@Stormtrooper812 ya they are spendy!!
I went to home depot they have no idea about that tar paper do u have a sku number or a picture of the packaging
Hmm no I do not but it should be over in the roofing area. By the vents and stuff that you put in garage roofs and stuff it is ment for sealing around vent pipes
@@TonyTheTechnician is it gray on the tar side ?
@@TonyTheTechnician how big are the rolls and if u don't mind me asking how many did u buy?
@@nunya5107 this is just one of many brands and sizes for an example www.homedepot.com/p/USEAL-USA-Band-6-in-Aluminum-Foil-Self-Adhesive-Repair-Tape-8872AF6/202086180
@@nunya5107 I think I used 2 or 3 rolls just for the back the NASA insulation in the front.
carpet aint no joke xD
Lol I was whooped after installing the front
where I can find your own seats
Ebay third gen Camaro racing seats or watch any of my new videos and check the description. I will have a link for alot of my Camaro parts. 👍
@@TonyTheTechnician i'm asking you about the custom Russian ones that code they have, I can't find any parts for mine
@@TonyTheTechnician russet
Dam u just game me an idea for my door panels I was gonna buy new ones
Nice. Glad I could help 👍
Center cownsoul
You know that you only need 25% coverage with the foil backed tar paper right? You dont get any additional benefits from 100% coverage. You wasted a bunch of it in the hatch for no reason
Not true, depends on what your using it for,. As far as coverage for panel vibration noise itself yes. But these are also used for many other uses. Round square corners inside of vehicle and boxes to better direct noise, used to help reduce exterior vehicle noises and also a good additional insulator to help control temps inside of a vehicle. So I wouldn't say it's for no reason.
the tar paper is going to be a HUGE REGRET.have you driven by a place doing roofing lately?that's exactly what your interior will smell like in the heat.
check out thirdgen.org and the issues these guys have with the cheap roofing stuff or cheap dynomat and the absolute NIGHTMARE it is to remove.
4-5 years and it's been great.
How's that tar smelling car working out? LOL
Chevy LS3 no smell of tar been over 2 years. Works great
@@TonyTheTechnician I'm guessing you use something to cover the smell. !?!
Chevy LS3 just the nasa insulation and new carpet over top
@@unite4peaceonearth 4 years later and no bad smell. Works great.
Make sure you keep the ugly ass seats
Terrible audio
Ernie King thanks for pointing that out lol. This was audio overlaid from the mic on my computer. It was garbage lol.