Citroen C4 blower motor and resistor location and removal , B7 2011-2016

Welcome,
Today's video will show you the location and removal of the heater resistor and heater blower motor from a Citroen C4 B7.
We will start by removing the cover underneath the glovebox which is held on by 3 clips. Then we will remove the two torx screws under the glove box.
On the inside of the glove box, there is a clip to the back that we need to unclip. Remove and unplug the courtesy light. To the top front on the inside of the glove box, there are 3 torx screws that we need to remove. Lastly, you can pull the glove box out of position.
Now we have access to the resistor and blower motor. Unplug the blower motor, whilst pulling on the tab turn it to the left (anti-clockwise) and wriggle the blower motor out. The resistor is located underneath the blower motor. Unplug the resistor. Pull onto the tab and slide it upwards to detach it. All that is left to do is to wriggle it out.
Citroen C4 B7 , 2011-2016 (Applicable models)
Don't forget to show your support by subscribing :)
Best of luck,
Carstar
Contact on [e-mail]
Disclaimer
Australia is left-hand drive with the steering wheel on the right, this can sometimes make my videos null or void for Right-hand drive countries with the steering on the left - please keep this in mind.
Before following any car tutorial, please ensure you have the knowledge, skills, and tools to perform the task safely and correctly. Always follow the manufacturer's instructions and guidelines, and if you are unsure about any aspect of the tutorial, seek the advice of a qualified mechanic or automotive technician. Any actions taken based on the information provided in the tutorial are at your own risk, and neither the author nor any affiliated parties can be held responsible for any damage or injury that may occur.

[@Hawkeyei1979]

Great video. saved me alot of money.

[@Aussiecarstar]

Thank you , you are welcome 🤗