How to Replace Cooling Fan Assembly 2013-2020 Nissan Pathfinder

Buy Now!
New Dual Radiator & Condenser Fan Assembly from 1AAuto.com 1aau.to/ib/1ARFA00625
This video shows you how to install a new radiator fan from TRQ that is engineered to fit your 2013-2020 Nissan Pathfinder. Radiator cooling fans keep air flowing over the radiator when the vehicle is stopped or moving slowly. They are an important piece of your vehicle’s cooling system. If yours is failing, or broken, you should replace it immediately to avoid overheating and causing more damage to your vehicle.
This repair was done on a 2014 Nissan Pathfinder SV 3.5L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2013 Nissan Pathfinder
2014 Nissan Pathfinder
2015 Nissan Pathfinder
2016 Nissan Pathfinder
2017 Nissan Pathfinder
2018 Nissan Pathfinder
2019 Nissan Pathfinder
2020 Nissan Pathfinder
Tools you will need:
• 10mm Socket 1aau.to/obwa/1AXAA00017
• 8mm Socket 1aau.to/obwa/1AXAA00017
• Trim Tool Set 1aau.to/oao7/1AXXX00006
• Ratchet 1aau.to/obVC/1AXAA00016
• Socket Extensions 1aau.to/obSM/1AXAA00015
• Gloves 1aau.to/oaIh/1AXSS00048
• Safety Glasses
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@rodlasher8478]

I want to commend those who put this video together. I watched two or three times to become familiar then when the time came to do the work one more time. Did a start and stop video from start to finish. There were a few glitches but spot on!!! My personal kudos to the person behind the wrenches and microphone

[@hersirnordic2814]

what a nice yt channel you have, thanks

[@heneraltriggs0743]

Can i use the OE control module to any aftermarket fan assembly?im checking amazon and some doesn’t have control module attached. Thank you.