TIPS to get a cleaner paint job while painting in less than ideal environment
Vložit
- čas přidán 8. 02. 2024
- clear coat AmTech product of ProSpray
www.amazon.com/dp/B0758YYDSH/...
Base blender/wet bed
www.amazon.com/s?k=TRANSTAR+%...
Compound
www.amazon.com/dp/B00063WGZS/...
3M machine polish
www.amazon.com/dp/B000O3IEPG/...
Presta Fast Wax
www.amazon.com/dp/B00AZAESRG/...
Prospray spot blender aerosol can
www.collision360.ca/pro-spray...
Trigga. I like that you put the door back on the car to blend. Only way to insure it matches. I like that alot.
Thanks Brian! yeah man especially If you have a bad case of ADHD like me I'll put 4 coats on the front door and 1 coat on the back door then 6 coats on the quarter panel Then tell the boss I don't know why it looks like a checkerboard I sprayed everything even 😭😂
@@thetriggerman954 lol thats right, you got the experience to know what not to do. Thanks for the upload, came in clutch for the weekend.
@@PaintSociety yes sir have a blessed one my man 🤜🏼🤛🏼
@@thetriggerman954 😎😎
Love how you take pride in your work. Everything is nice, clean and organized. When I got my first position as a painter I was spraying in something similar to this. 50+ year old booth
Thank you sir, I try. Just because I'm spraying in an old dinosaur doesn't mean I have to work like one. 😎💪🏼
@@thetriggerman954 How many preppers do you have? Or your riding solo
@@ot7694 one prepper. And me small set up
@thetriggerman954 do you remember which budget friendly primer base and clear you used. I keep hearing between upol, speedokote, 5 star extreme, and nason
@@antonioprado8068 Nason has been around the longest and have upgraded. They've come along way. So I'd go with Nason if I had to make a choice.
Thanks for taking the time bro to show us!
Any time! Glad you enjoyed 💪🏼
Hey Triggerman..love how you pay attention to details of this particular spray booth for your painting pleasure..very informative info..really something like painting in your home garage..again outstanding job..keep them coming..I'm learning from ya!
Thank you Eric, yeah man this big dinosaur has been my home for 11 years now, so I had to figure out a game plan. Especially since I hate to wet sand and buff 😜.
Thank you Eric. I appreciate you 🙏🏼
Hey Trigger, I was beginning to wonder if you was ok mate as it's been a while but here you are again making my day with a new upload👌some very good advice there for anyone that doesn't have a posh booth (me included) as it is difficult to get a clean job.
What has made a big difference in my little booth is to lay carpet on the floor, what I use is the outdoor patio carpet as it's waterproof and hard wearing and mine has been down nearly 2 years and it's still giving me clean jobs plus I never put any water down but I just hoover it a couple of times a week🤓😎
Thanks for sharing your tips and tricks Trigger👏🙏👍John UK
I keep hearing more and more people saying that they use carpet That's very interesting Thank you for sharing that tip John ♥️💪🏼
You are welcome Trigger, I can't help much but I will where I can but yeah it's getting more popular, I think you know Brian (Paint Society) not sure what he uses but it's green making it look like a tennis court 😂but he loves it, maybe ask him what he's using👌👍
The toker's have nothing on the Triggerman!! Always clean, always stellar work from the Triggerman 👍
Thank you Chris yeah that stuff is a whole another ball game for me. I couldn't keep up if I tried 😅😅
Trigger, it looks like you always adapt to whatever cards you are dealt with ! That's what pros do! Looks great as usual.
Thank you man. And yes I do. No need to complain let's just find a solution work around it and make it happen 🤜🏼🤛🏼
This vid shud get lots of views...very helpful info❤❤❤
Thank you Jo we shall see 🤞🏼 but if it doesn't as long as it helps some guys out then mission accomplished 🤜🏼🤛🏼
Looks awesome. Someone I worked with and a mentor told me dirt come from 3 places. the car, the environment, and you. awesome videos
Your mentor was a smart man Thank you Kenn 💪🏼
Great job. Thank you for sharing the knowledge.
Thank you LooseNut 💪🏼
Man did that feel weird typing 🤦🏽♂️😂😂😂
very clear about prep. a dust free painting job ,,,,, i really thank you for your teaching can,t not be any clear than that
You are very welcome. Thank you Robert 💪🏼
Another great clip Trigger man love the work.
Thank you my man 💪🏼
@@thetriggerman954 A1 one of the best on this channel
Looking sharp Triggerman.
Thank you brother 💪🏼
Thanks for sharing your experience Trigger. I have been going nuts trying to refine my process. I think I finally cracked the code but it takes more work preping and cleaning, cleaning, tacking, tacking. I started using a lint roller. Static is the enemy and no way to avoid. I have seen floaters get electrically drawn from my clothes to a panel like a magnet. a wet bed on the floor really helps. Great tips as always brother! Nice clean blend out the lab today!
Thank you man. Did you ever think about one of that's static guns? I'm still on the fence. Hard for me to justify spending that much on one when my jobs aren't even that dirty. But I'm curious about them.
Nothing wrong with old school TriggerMan
@@davekennedy-ex6qk facts 💪🏼
Spot on! I paint inside a portable garage... the type with tarp walls, doors, etc. Even though I rigged it up with carpet flooring and a framed extension for extra length that holds intake fans, dust and dirt are inevitable. I use an electric leaf blower a day or so prior to painting. Turn on the exhaust fans, and blow it from top to bottom, sides, and carpet. Just keep blowing until I dang near blow the walls off. 😂 You can never be too clean to reduce (not get rid of) dirt nibs.
Yes sir, you'll never eliminate dirt nibs even in a brand new spray booth that looks like a damn time machine you'll still get dirt just reduce the amount and also lots of prayer 🤲🏼🙏🏼 😂 can I get an amen up in here
Didn't realize you did the masking too ... great video ... great info ...
Thanks man. We have a prepper that masks them, then I put my plastic in the booth. Glad you enjoyed 🫡🤙🏼🤙🏼
GOOD one Triggerman. nobody talks about this stuff.
Thank you Alex I'm glad you enjoyed the video. Hopefully it helps some guys out there working and not so perfect spray environments 🤜🏼🤛🏼💪🏼
Excellent tutorial Trigga! I would add a quick nib of any dirt after first coat of base. Plus, using a stat gun is a game changer, especially in a spray environment like yours.
Thank you man, yea I always tell guys to denib and free base coat just wanted to add a few things I never mention. But you're absolutely correct. I've been on the fence about a start gun for years lol I think it's definitely in the very near future. Thank you again McCats 🤙🏼🤜🏼🤛🏼
The only thing I've been doing differently is after spraying down my canopy booth I put down an clean tarp to drive the car onto but this is definitely an good video brother especially like you said for people using cross daft booth 💯
Thank you man. Driving onto a clean tarp definitely sound like its eliminating a good amount of dirt, plus all of your other things. Never thought about that one. Good tip bro 💪🏼
Yo what up bro. You actually got a nice booth there. I have a "home made" both in my shop, built where there was an apartment area with a family room and kitchen. Low ceilings, perfect dimensions. I installed LED lights, built a fan and filter box into the exterior wall, and two big barn doors with filters on the inlet side. Anyway, i need to increase my skill with laying down the wet bed. I've tried it a few times but haven't quite perfected the process yet. Will be checking out the rest of your videos to pick up some knowledge! I'll holler
My spray booth was actually built by my boss and his dad and one other guy brick by brick they built it in 1956 It's so old that it doesn't even meet today's standards but it's grandfathered in fire department bugs him all the time but he has documents showing his grandfathered in as long as there's no fire hazard I wasn't even thought about being born yet while this sucker was running 😅😅
your sick with it still fire
🥳🔥🔥
GREAT JOB/VIDEO TRIGGER!!!👏👌🔥💪👍🏻❤️💯 I LOVE YOUR VIDS!!! KEEP EM COMING SIR!!!
Thank you James. And you got it man 💪🏼🤜🏼🤛🏼
@@thetriggerman954 🤝 You're The Man Trigger!!💪👌🤞💯
Unfortunately i don't have the luxury off any kind of booth and manage to get by . Cleaniing my small workshop is a must , most jobs come out reasonable but i have to do alot off nibbing and buffing 🥵. Great video 👌
I feel you I hate wet sand and buffing, I don't think anyone hates it more than me 😄 It's all fun until then
Good job...good points on cleaning.
Thank you Mark. Glad you enjoyed the video 💪🏼
Hope you keep making them, a backyard butcher like me needs all the advice and tricks.
@@markbolick7989 backyard butcher 🤣😅 I got you man. 🤙🏼
I’ve never sprayed in a down draft. I spray boats thought so I have the door on the transom facing the exhaust and the bow facing the door with the intake.
Sounds very similar same concept 🤔
@@thetriggerman954 I could show you some pictures. Boats are interesting to paint!
Most Tik Tok ppl are a joke when it comes to trying to give advice.. looking good as always!!
I bet, I know I can't keep up with the foolery on there 😅
Makes me want buy that hand cannon u have bro
As long as you can handle a Canon and you have military armed forces experience go right ahead if you're a newbie you're in big trouble brother sigala shows no mercy 😅😅
👍🏽😎 yesssssir!! Prep means everything. 🏁🏁🏁
You already know 🤜🏼🤛🏼💪🏼🏁🏎️
OKAY I picked up so many good tips in this video that I'm going to have to watch it again and take notes! I like that gun you're using too. I've had great luck on metallics with the Sata 4000B Digital that I bought a few months ago. For clear, I use an Iwata Supernova. I would like to know what brand that regulator is that you're using!
On my cecola spray on my Sagola spray guns I use Sagola air regulators. But on every other gun I have is a devilbiss regulator I have like 30 of them lol
Old school trigg never fails still do that in my home studio 👊👊
Old school for the win every time Mr Brown 🤜🏼🤛🏼 you need to show me some of those jobs you put out
@@thetriggerman954 got a Suzuki bandit nearly finished just got to clear it , I'm shooting a vid will post it 😉😉😉😉
@@deanbrown7643 now we talking 💪🏼🥳
@@thetriggerman954 you and upk will be the first I'll post it to your channels
@@deanbrown7643 VIP 😎
Great video big bro! Mr.ticktockers! Swear they’re sponsored bywetbed makers haha
Lmao 🤣🤣 "Mr Ticktockers" hard to keep up with the trends. Would have loved to see them painting 25 years ago when there was no wet bed just had to prep correctly 🤦🏽♂️😅 What up bro Hope all is well and the family is good. Stay blessed 🙏🏼
How wide is that booth? I'm thinking of building one.
Triggerman say if you used a light gray sealer and you put the base coat paint on would it be a different colour on the car mate 😊
There you are good video 📹 mate thanks for sharing that water 💧 keeps the dust down so tell your friend and tell hes girl 👧 friend 😊
Lol 🤣 right on Andy 😎
Triggerman.......you got your paint suit on today!
😀
Shhhh 🤫 don't get to use to that brother 😲😭😭😭
@@thetriggerman954 😀
Something that helped me with cleaner air spray out in the open was buying a 3 stage desectint dry air technology filter
Interesting 🤔💭 any particular one? Good info for some guys on here. 💪🏼
@@thetriggerman954 it's from a company called global industrial I paid around $450 and it has produced really clean air just Google global industrial there site will pull up or Google arrow desiccant dryer see if that pulls up hope this will help you out getting cleaner jobs
Another great job trigga. Hey is the wet bed you use the Transtar? Your link doesnt link to it.
Yes that's it transtar LV500
I juat checked damn price doubled 😲
Maybe that's why the link changed.
amzn.to/49a50JE
And thank you Andrew 💪🏼
@@thetriggerman954 Thanks, keep em coming trigger.
Looks good 👍 have you ever tried a turbine setup for spraying? Alot less pressure
No I haven't used it myself I have a friend that paints RVs and buses outside and he uses one for his business they look pretty cool maybe something I check into in the near future if I was doing work from a home garage or something.
@@thetriggerman954 once you try it you won't go back
🔥🔥🔥 as usual what kind of razor is that you using to cut that plastic
I use these, they cut like butter, You can even replace the blades. A heads up though Don't use the blades it comes with order you a set of good blades from Amazon which should only be like $6 for a pack of 100. Thank me later
amzn.to/48enQ1d
@@thetriggerman954 heck yea I appreciate that 👍🏾👍🏾
@@mississippiwrenches295 fa sho fa sho 🤜🏼🤛🏼
Thumbnail got me intrigued 😂
You a freak in the wilderness 🦌🏃♀️
A friend of mine would set off a bug bomb in his garage a few hours before painting to keep the insects away. He swore it worked.
Sounds like a good idea. Few hours before is smart so that there are no fumes in the air to land on the paint. Great tip I'm sure some guys reading the comments could use that
Thank you 🫡
Hey Triggerman, how you get those paint jobs so clean?
Triggerman: Mr. Clean, Mr. Clean, Mr. Clean...
Hey....wait a minute... Hold up. Could it be? Lemme see you without that hat again. 😁😆😉😉
LMFAO aye man 😂😂😂😂 get outta here with that. Tight white shirt and a mop to I bet 🥺😭😭
how do you mask door jambs;
The prepper does the masking. I can ask her for you. 😅 But we back tape and use foam at the shop
Why did you slow way down on the second coat of clear?
Probably just the angle makes it look a lot slower. There is no "slowing way down" with a Sagola 4600 that sucker will run on you before you can blink 😅 I always put my first coat on rather fast then slow down to get a good flow out on the second coat. 🤜🏼🤛🏼
I usually like to spray my outlets with high pressure water. 😂😂
Somehow I believe you Jeremy 🤔😂
Sup Trigga!!! Tell those trolls to show me a dayum Toyota Corolla on a lot that’s slick as glass…. Don’t worry I’ll wait! (In my Katt Williams voice)
You and I know that but for some reason trigger gotta go over an beyond and remind them 🥺😭 whaaaat up you crazy mofo 🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼
The thumbnail lol
I figured we all can relate to painting in the woods around pretty girls jogging and deers looking at us 🤣
Tik-tokers are all show. Triggerman the real deal 🔫
Thank you 😊♥️ I appreciate that Jay
THERE YA GO TRIGGA!!! MASK ON, JACKET ON, NO PANTS BUT ILL LET IT SLIDE... YOU DROPPED ALOT OF GEMS...👀 HOLD UP, DID YOU WEAR GLOVES¿... UNSUBSCRIBE!!!
🥺
Looks damn good !
Thank you David 💪🏼
We don’t use sealer at the shop I work at, the reason being is because the time it takes for sealant to dry before applying paint, how long do you flash off till you lay down paint on your sealer?
Yes it definitely slows things down. I usually wait 15-20 minutes. If you apply paint to soon then you run into dieback. I personally like to just apply paint over the 2k primer if it hasn't been sanded through.
Man you really blessed brother, the shop I work at they expect the car to be painted in 15 mins I work for el cheapos, always rub throughs on panels because they tight asses on time and primer, I primer with a heat gun in my hand the boss will mix up 100 mil of primer for a whole door that’s complete with body filler, I’ll put one coat on it dry it with heat gun for a minute then I put a second coat that’s barely a full coat, so when it comes time to rub it I get rub throughs and then we have to primer can the rub throughs, my boss cry’s about the electricity spent in spray booth, so yeah no sealant allowed, they don’t even let us painters at the shop mix the paint other day I did a car quarterpanel the door, the fender, the hood and bumper bar and the el cheapo mixed me up 250mils of paint, he put 250mils of thinners in it since our system is 1:1 ratio comes in the booth and tells me I mixed you up 500mils, man when I looked at the cup and only seen 500mils all up I almost hit him with my spray gun lmao el cheapos can’t seem to catch a break always end up working at a shop with either a real nasty tradesman/boss or a el cheapo like the one I’m working at now
@@The_paintman geeesh, why don't you go apply to higher end shops? I mean my boss is cheap too but certain shit he knows I'm not going for.
I’m not confident enough brother the last shop I worked at before this was a higher end shop and man they didn’t let me near a gun or spray booth unless it was to clean it, was getting treated with disrespect daily and was just slaving away prepping panels, I plan on leaving this shop within next 6 months but I’m just trying to get as good as I can and quick, trying to get better at body filler, taping up cars fast, cleaner spray jobs and faster prepping, I love this trade so much but haven’t had my time to shine and I think I’m a slow learner to be honest, been in the trade for 4 years still struggling daily but I try my best
Never really had a good teacher bro kind of just picked up everything along the way my self, the good and the bad hahaha but I watch you daily brother so learning from the best
Hello! Which clear coat do you use in this video? Thank you!
It's the AmTech clear. There is a link to the product in the video description
@@thetriggerman954 Thank you! The reason i asked is because the way it behaves when you paint. I use a HS clear, the u-pol UHS Diamond clear, and its really really thick, and i cant get a good finish with it
@@Detailing_And_Rust_Repair too thick lol I've had those types of clear, then you have to reduce it to thin it out but then it will dieback on you. This clear lays down flat with no reducer and no dieback.
@@thetriggerman954 I see :) Well lucky for me i just ordered a 2:1 clear similar to the one you use. I would love to try the one you use but i live in Sweden, and cant get it here as far as i know. Its gonna be interesting to try a thinner clear coat though
@@Detailing_And_Rust_Repair good luck, let me know how it goes 🤙🏼
Great job boss
Thank you Mr.Cutlass 💪🏼 I had a 71 cutlass and an 84 Kidd in the house too ✊🏼
I dunno... I've sprayed in all them fancy down drafts and I've sprayed in simple old booths. Even built a few booths. I think you're right, stick to some hard and fast rules about cleanliness, they're all good. Hung done of my priest jobs in a booth that was twice my age
Exactly 😂 It's all about that " spray booth hygiene" 💪🏼
@@thetriggerman954 amen, brother
What kind of paint guns do you use to paint and clear?
Gravity feed, HVLP, HTE, RP 1.2-1.4 tips
Experience right ther the way he can put on so much clear and overlap without running it is jus too nice
Thank you. I have my days were nothing goes right though😭😄
Remember back in the day ground the vehicle i use to toss a chain around axle to the ground lol and cable with clip to the vehicle 😂
I've heard that, in think they were doing that right before I entered the trade. I still can't wrap my head around how that works but apparently it did work. Lol crazy
Controls static electricity caused by the spray over a panel so dust and dirt Is not attracted to your pant job
@@joestrait6291 I would have had to witness that stuff in person sounds crazy but I've heard from people at shops I work with they get to do it so I believe it
Trig need a little help with bondo. How do I get a bondo job perfect?
I'm the last person to ask about bondo, I can't fix a dent to save my life 🤣
This younger generation needs to understand that the cars there painting have orange peal and dy back from the factory,if you slick one side out you kill the whole car.The only cars that need a slick paint job is a show car or maybe a all over.I'm old school came out of JVS in the 90s we made the cars look as factory as possible.If you go to a new car dealership and look at a new car there's dirt all in them paint jobs.IT'S a privilidge to get a job with a 50 thousand dollar booth most of us paint in a less then shit garage most diyer's do.Just paint nib out the dirt and move on this ain't the worlds Autarama with the best trophy award.If you get in this trade enjoy it you can have a happy living and every now an then a car will show up that needs that flow coat.Trigga does awesome with what he's working with.
Thank you sir, and I've been preaching that about factor orange peel since I started the channel. But they refuse to hear me. Matter of fact they told me they don't even want to hear that crap 🤣 so I'll mention here and there But it's like beating a dead horse. Once you paint in one of these old booths you can paint anywhere.
Looks good !!
Thank you 💪🏼
Used to manage a auto paint store. You just did it cleaner than 95% of stealerships and they have the latest and greatest equipment.
Pride matters. Great job!
Thank you Sir. I've worked in those places I try to keep the same work ethic as I did when I worked there, if not even to a higher level. So once I go back to those shops my work should be better than ever.
Thank you again ♥️
Love to know what colour that is
Car left, I forgot what it was, I'll look and see if I still have the can out somewhere
The biggest problem I had when I had body shops was finding people that knew what they were doing. Wish I could have worked with you. Your truly one of the best.
Thank you sir 🫡 I take pride in anything I do.
Not a sir, just old shit. I know you take pride in what you do, it shows. Your boss is lucky. Thanks for you for your channel I know you are helping allot of people with painting.
@@thetriggerman954
Nice work big homie!!!……i have to paint my cls550 soon cause my clearcoat is failing, so ive been watching alot of paint videos again, last year i painted my c/10 and 3 years before that it was the nova in the lil pic next to my name….only thing now is my cls550 is black so there is no room for error!!!
That Nova looks tough stripes down the hood. I'll trade you a paint job for it 😉 drop an LS in that sucker 😲
@@thetriggerman954 it already has a LSA supercharged LS in it…..650+ hp….im building a 408 stroker for it as we speak
@@trentdawg2832 😯 good lord. Beast mode. Okay I'll trade you two paint jobs 😁🥳🥳
Omg great video man congrats, and thanks for the info
Thank you Sergio glad you enjoyed the video. And you are more than welcome 🤗
more videos, please and thank you....like how you mix'n and shit
Videos coming weekly my man I have plenty of heat to drop. Meanwhile you can catch up on some of the older videos get familiar with how we do things here in Triggerland 😉😂💪🏼
i'm on it !
@@thetriggerman954
quick buffy on the rest of that car they thinking you painted the whole car
now you gotta buff the rest fo pro fection ! lol you got that nack for paint bro !!
Been doing since the 90's bro it took time. Now I can do this blind folded.
you supose i got a bit of sanding in my future ?@@thetriggerman954
i like your Videos man and learn a little too, im a 40 year mechanic that want to learn to paint, if possible you know what i mean
I know exactly what you mean. More knowledge/skills more 💰💰💰
I thought you were doing one outside my guy 😓
With a deer and chick jogging huh, sorry to disappoint you cuzz
@@thetriggerman954 no. I live a 2 minute walk from the woods, I see deer all the time, but am still in city limits. I thought the background was more representative than literal, but you were basically still spraying in a booth.. I thought it was at least in a garage big cat
@@thecornelliusjamesshow852 🥺
@@thetriggerman954 😅😅
Definitely PROFESSIONAL!!! work man!!! you are truly an EXPERT!!! at what you do
Thank you sir I greatly appreciate it 💪🏼🫡
Nice work and some great tips,keep the vids coming👍
Thank you sir 🫡 I'll keep em rolling 💪🏼
great work and your right you can paint anywhere. Just need to wet it down. putting your mixing inside the booth is also really good. Like you are doing. I remember opening the booth door and the fans would shut off....Then the filters would shake. There comes the dirt. or if I rigged the door button the dirt would come in with me. Having a mixing table near the job is really another key to getting less dirt. Today I just dont care much....Cut and polish everything. I love the reality painting stuff you show. People need to know that there are Hot days and cold days. you dont have temp control. All those things make it much easier to get a consistently nice job. Reality is most people dont have those things.
Cool work trigger, wanna Lil life hack to remove dat daym pill tap?
Simple:take sand paper 2000P
Make a 1 sm wide and 20 sm long strip with scissors
Put the top work side on pill and hold in neat by your finger
And make a "ZIP!"with help of second hand.
Don't thank)😊
Man you got me lost like Jack Frost 🤪 I got the 2000 grit sandpaper but after that I'm lost lol
Looking good
😎 thank you sir
Nice job boss 👍, Question why don't you put three coats yourself like your buddy because you want to save money on paint ❓
Thank you sir, I Don't have a need for 3 coats I achieve the finish I want in 2 coats, and my jobs come out fairly clean. Every now and then I'll put 3 coats if I need to bury a few small dirt nibs.
@@thetriggerman954 Okay I understand 👍
Love this Triggaman! Keep up the good work!
😯😲 why thank you Skee Skee
tiktokers make me🤮
You and me both. I was forced to join the tockers, gotta keep up with the youngens 😅
Another Great Job
Thank you Chuck 💪🏼
good tips! appreciate the free game
4show more than welcome 🫡
Trigga_MAN letting aall the secrests out! Great work!
Hey my man ✊🏼 not all of them just a few. I know you know the struggle to get a clean job. No Jetsons booths around here 😭
Chinese keep up with those folks😂💰💰💰
Trigger doing wet on wet base Application 🤣🤣🤣 it looks good tho brother.
Thanks Trey you know I Trigga get down 😜🤪
@@thetriggerman954 oh yeah I know u like to get your coverage on the 1st coat I was too when I was spraying solvent.
@@treysterthepainterturner8404 ohh yeah that's right you switched to water. How you like it compared to the solvent?
@@thetriggerman954 I mean it’s a whole lot faster i honestly love it. Downside is u can’t just use any gun. But it’s very fast. Especially 1 coat application that’s it’s.
@@treysterthepainterturner8404 I always here people say it's slower, maybe that's the drying part. Dam 1 coat application 😍 right up my alley 😅
👏👏💪💪
🫡
Clean!
🫡
It looks great man. These guys kill me. You always lay that clear nice.
Thank you Chris I just had to let it be known that's not the look I was going for that whole glass flat paint job is truly only a CZcams thing and I only go for that look when I'm making videos to demonstrate for guys other than that regular paint jobs with factory peel everyday all day Thank you again Chris 🫡
🔥🔥🔥
🫡
but no seriously.. paint outside in a forest..
cause my paint booth is in a rural area and i only have a roof lmao no sides just a roof.
Oh yeahh I remember you. You've were painting out in a wooded area, painting a Chevy or something like that, a bright color li believe. I vaguely remember. Yeah you definitely on Smokey the Bear status
@@thetriggerman954 lol 🤣 yep 💥🙏🏿
great job mate 👍👍
Thank you sir 🫡
This why I like watching you cause you got that old school mentality of how things should be done instead of like you say these tik tokers wanna be all fancy and shit. 😆 my man great work as usual damn I'm ready to video again and talk crap like I used to.
Lmao yea man you have that one video where the other guy holding the camera was talking shit, shit had me laughing we need that real shit on here. There's enough fluff out here already. Upload more bro, I'm bored watching these paint channels 😭😭😭😭
@thetriggerman954 I gotta bro.
Where are you located I need to paint my truck
I'm in pompano Beach Florida
Great job
Thank you sir 🤜🏼🤛🏼
The sagola 3300 with the tech cap is 🔥🔥🔥 for clear. It's great for metallics too. Also, melting the edge of sealer you only really need to do it for water base paint. With water base for some reason if you don't melt the edge of the sealer the metallic is going to bunch together in the area where you stopped with the sealer. You can use reducer to melt the edge of sealer.
Ok so maybe That's a water-based thing but I've definitely seen solvent base guys doing it maybe just something they saw and it spreads. I personally have never sprayed water-based so I can't even comment on that. But thank you 🤜🏼🤛🏼
@@thetriggerman954 they probably do it just to be safe plus it only happens with 2k sealer not 1k sealer.
@@shaqhobson5074 well alrighty 🫡 thank you Shaq 💯
My boy never miss with the lessons this coming in handy got a paint job outside tomorrow, more tips for a cleaner job!!
What up Playa, good luck on the job tomorrow. What ever happened with those 2 trucks? Deal come through or what?
You tak rag even on metallic base coats trigger
Hellz to the yeah yeah every job
Nice job. I do the same thing but I’ll nib my basecoat after the first coat is flashed off that way it’s clean when I do my final coat and blends. Usually stuff comes out really clean. A few nibs here and there we just let them go. Even factory has dirt in their paint. I nib and buff very rarely. It’s not about having a state of the art booth… it’s about taking the right steps and the right prep and mask. 👍🏻👍🏻
Yes sir. Always nib after base. I talk about that in most videos just wanted to give a few additional tips thank you for chiming in 😎🤙🏼💪🏼
Another 🔥 job Triggerman and packed with great tips! Experience is everything 💯💪🏾
The champ 🏆 in the house whaaaat up mane thank you brother 🤙🏼😎
@@thetriggerman954 🤝🏾💪🏾
Looks good brother. Enjoy your videos. 🤙
Thank you Glad you're enjoying them 😊💪🏼
Just blow some clean air in the booth to make a slight over pressure. Then nothing will be sucked in, in the small cracks of the booth...
🤔 I'm going to need you to teach me that trick. Sounds a little above my level of comprehension 🤓
@@thetriggerman954 just a blower with filtered air doing a bit more pressure or volume than the one sucking the air out. I use it in my own booth. 👍
@@henriksallingjensen8104 my booth isn't completely sealed large gaps everywhere. Not sure if that would still apply