Workable interior parts for 1/10 RC car(HSP 94123 Flying Fish RWD drift car)
Vložit
- čas přidán 13. 09. 2024
- 3d printable Interior parts for 1/10 RC car.
Designed for HSP 94123 Flying Fish RWD drift car.
But, many parts can be applied to other 1/10 chassis.
Workable interior parts for 1/10 RC car : www.cgtrader.c...
HSP 94123 RWD conversion kit link :
www.cgtrader.c...
3dexport.com/3...
Multi offset 3 piece wheel kit : www.cgtrader.c...
*Necessary parts
M2 6mm countersunk bolt - 9pcs
M3 6mm countersunk bolt - 4pcs
M3 10mm countersunk bolt - 3pcs
M3 8mm wrench bolt - 2pcs
M3 10mm wrench bolt - 4pcs
M3 10mm countersunk screw - 1pc
M3 nut - 5pcs
1.7g micro servo - 2ea
www.aliexpress...
9g servo - 1ea
www.aliexpress...
mini SMD LED - 4pcs
www.aliexpress...
office pin- 2pcs
office clib - 5pcs
water slide paper(clear)-1ea
water slide paper(white)-1ea
3d 프린트로 출력가능한 1/10 알씨카용 인테리어 파트들입니다.
HSP 94123 차량에 맞게 설계되었습니다.
하지만 많은 파트들을 다른 1/10 차량에도 적용할 수 있습니다.
Amazing detail!! Unbelievable..
Thanks a lot. 😄🤗😄
absolutely fire
Incredible work!! 👍👏👍
Thank you.😚🤗😊
열정과 기술과 이해가 있어야만 가능한... 정말 멋있어요
감사합니다.🤗
What happens if you hit the front end, with the ESC and receiver placed there, I don’t think that’s a good idea.
Check out Tamiya TT02 RWD conversion with 3d printer : czcams.com/video/QUsKKTEY4Us/video.html
와,정말 대단하시네요^^
감사합니다.🤗
Where can I buy the plastic parts for the motor and the steering I don’t have a 3D printer
La ragazza in macchina é Ripley di alien 2:)?
Красавчик
My friend if i could buy that from you , just name the price , it is Awesome you have such a talent best wishes MAGrC
Я бы тоже не отказался бы купить 😅 потрясно у него получилось , теперь и я загорелся желанием ,что бы и у меня в Sakura d4 стояло такое же произведение искусства 😅😊
@@FIGOVAR 100% you and me both my friend 🙂 Stay well and Keep on RC'n
Can this work on the Yokomo YD2 ZX?? My Subaru BRZ needs an interior.
It's probably possible. However, some modification will be needed. It will be possible at any chassis as long as you use only the dashboard excluding the bottom floor parts or console parts. If you modify upper deck parts console parts also available. Ref this video : czcams.com/video/sgSAnLDDapc/video.html
nice job but why do ppl make them turn so sharp takes the look away, better to just learn how to drift properly with more realistic steering
Hey Zeus about to buy all the incredible files I need for the conversation. But I bought a rtr brushed version of the flying fish and would like to know what motor/esc you’re using?
I used my old 9.5turn BLDC motor. And ESC link is : ko.aliexpress.com/item/1005001657336774.html?spm=a2g0o.order_list.order_list_main.302.21ef140fN6cPSJ&gatewayAdapt=glo2kor
@@zeusgarage4368 thank you so much!
where did you buy those speedometers???
As shown in the video above, they are all 3D printed.🤗
What chassis did you use?
HSP 94123 chassis. Refer this link : HSP Flying Fish 94123 RWD conversion(stage-1, center servo &motor)
czcams.com/video/Vzgjk8Fb-NQ/video.html
Can u made a bracket for a fwd 2 wheel drive with the motor on the side
You mean front wheel drive? Bracket is possible, but drift performance is very low.
@@zeusgarage4368 fwd bracket for mounting a motor up front on a side angle
@@TW39 Anyway, I've already designed a type that mounts the motor on the front. But it is rwd, not fwd.
@@zeusgarage4368 would be good if they make a fwd hsp flying fish chassis
If you can see and my videos of the project I made from what you did in tamiya tt02
What body you will use?
I have a plan to make in/exterior parts & door open structure with cheap S15 body from Ali. I already bought it a month ago.🤗
How much is a conversion kit?
Please click the kit link above.☺