Evinrude 9.9 HP Carrier Bearing & Seals Replacement

[@scotts653]

All of that oil on the outside of the carrier is 2-stoke oil from the exhaust tube. If you take the prop off and shine a flashlight you will see the bottom of the exhaust tube. If you are getting water in the LU oil, it's most likely the shift shaft o-ring.

[@GO_OutDoors]

Glad you made this video cause I am going to be replacing the seal in mine. You forgot to show how to add new fluid.

[@coastalcleaningandmaintena2884]

Your links are gone. Qhere can i get one and what uear was yours?

[@paulajuck5993]

Wow very interesting....you made it seem easy..great job!!!!

[@MrHabitat009]

Great video guys! So if I have moment in my prop would this be the fix you think? Thanks

[@Rlip]

Sometimes the shaft and the bearing carrier won’t come out easily so heat the outside of the case up and make a jig to help pull it out

[@donferguson2495]

Save the old carrier , the location of the Crack was on the water side that doesn't seal anything

[@jimpocalypse1]

At 53 seconds you have pictured the other end with weep hole leaking. Where did that oil come from? there is no seal on that end.

[@hellopeople6160]

Awesome 😎

[@robward9475]

No link?

[@Bansheeboat]

Sorry Rob the place is
www.crowleymarine.com

[@robward9475]

@@Bansheeboat sweet, thank you!!!

[@BasVossen]

I hoped you had found a way to take out the old bearing and just replace the bearing instead of investing over $100!

[@Bansheeboat]

Our bearing carrier had a crack in it so we wanted that replaced as well.