The instructions tell you how to operate the rear door but not identifying which port of the TD-2.0 board to connect the servo to. Do you know which one?
@@mrjhamm4208 Yeah, immediately after posting my question, I had another look at the controller and realized that there is no other servo port except one next to one use d for TOW, so it had to be that last servo port. Tested with a micro servo and it worked. Thanks for your answer.
@@chuckschipper7731 Take a servo and glue it sideways inside the tank. Bend a suitable connecting rod and attach it to the bottom of the tailgate and to the servo. The control of the servo is explained in the Tongde manual.
Sehr sehr schön wirklich toll😮😊
The instructions tell you how to operate the rear door but not identifying which port of the TD-2.0 board to connect the servo to. Do you know which one?
There is only one free servo port, the other is used by the servo for the TOW
@@mrjhamm4208 Yeah, immediately after posting my question, I had another look at the controller and realized that there is no other servo port except one next to one use d for TOW, so it had to be that last servo port. Tested with a micro servo and it worked. Thanks for your answer.
Is there a specific servo that is fully compatible with the controller board?
I just took an old one from the craft box...
What did you use for the rear door to open and close?
Please read the comments...
Read the comments and have a micro servo to open and close but what servo horn did you use as well as what type of connection rod.
@@timgreen9049 I used the servo horn that was supplied with the servo.
The connection to the tailgate was made from brass wire..
Is that a standard feature?
the function ist implemented in the electronic - but the mechanical part is to do by your self
Can you explain how the rear door operates so it can be duplicated?
@@chuckschipper7731 Take a servo and glue it sideways inside the tank.
Bend a suitable connecting rod and attach it to the bottom of the tailgate and to the servo.
The control of the servo is explained in the Tongde manual.
Where can you buy this?
www.dklmrc.com/product/td-rtr-rc-m2a2-ifv