1965 VW Beetle Restoration - Fender & Apron | Rusted Metal Repair
Vložit
- čas přidán 23. 09. 2023
- Today we repair the rusted out front apron and fenders. Fabricating metal sections, cutting, grinding, welding and more. Preservation, restoration, repairing antique, vintage, classic cars and trucks is my passion. This 1965 Beetle was forgotten in a field in South Georgia for 40 years. Let's bring it back to life. CT, CTG, CT's Garage, ctmoog
- Auta a dopravní prostředky
The more i see you painting it the more I think you could go with a complete paint job.
Hard to “blend” a patina. I’ve seen numerous attempts. Most are terrible. Hard to replicate decades of natural wear.
Metal skills are 🔥! 😎
Thanks Buddy! =)
I don't understand why people pay a body shop a $100,000 for a two year restoration on a VW bus, when you can buy a damaged 2022 911Turbo Porsche from Copart for about 30,000, manifest, expect, accept, you deserve one brother, best wishes.
Believe me my friend. I've been thinking about a 911 =) it could happen! =)
Here is the Porsche rebuild I wanted you to look at, look up I FOUND A WRECKED PORSCHE 911 GT3 AT AUCTION. @@CTmoog
I vote that you paint this beautiful car. I do not know where we got the popularity of that patina thing.
google "patina vw" - it's a thing =) the 914 will be painted real nice!
You are doing a very good job it very nice
Thank you! 👍
It was a piece of scrap, but now it begins to look like a car again😂👍👍
Hallo Und danke für die Info und tschüss aus Düsseldorf Germany 👍👍🇺🇸🇺🇸🇩🇪🤵
ct old car looking good
you have basically HAND BUILT an entire car by yourself in a year! AMAZING!
just about! =) Thank you!
Some people would look at this VW and never guess it's got a pretty nice foundation.
Yes, you really have to see the potential in something. It can be difficult sometimes.
For all the work you’re doing. New fenders and a paint job would be a nicer look than the rust bucket look. That’s my feeling
The part behind the headlight is called "headlight bucket" you can still buy them im sure
25mins in, the laugh when you realized the patch you cut looked like something else 😂😂
Great job 👏
Nice Work CT ! Good to see you on Sunday ! Thanks Straight Ahead ✌😎
Thanks Mike!
Very satisfying build. Your narration and tone of voice add to the overall presentation.
Thank you kindly!😎😎😎
Making it look easy.
Thanks man!
Top markotop..👍👍👍👍
fantastic CT!!!!!
Thank you my friend! =)
You're welds have improved so much! Good work.
Thank you!
Hey CT, old friend. Great to see you back on the beetle. You are doing some fantastic work on her. Always inspiring to see you on your journeys. Love travelling the restoration road with you. Cheers Guy. (iamhutt)
Thanks buddy! 👍
CT lookin good
... Patience is the key to this Restoration and you sure have plenty ... Thanks Coach CT !!!
Great job on the fab of the patches CT! If you ever need to "crisp up" a curved bend line, a hammer, chisel and rubber mat will help bring definition to a difficult line. I'm sure I'll use that method at some point with the 356. You're killing it brother!
Thanks Greg! Good tip! Back atcha buddy!
Brilliant idea with tape for metal template 👍💯
Thanks 👍
Omg CT, you've come on loads since when I first started watching you in your garage back at home with rusty. Well done buddy
Thanks Jamie! I know you've been here and I appreciate that. 👍
Your skills are Improving and your arsonol of tools are awesome. Do you know how much the stripped down body weighs? What lift Are you using? Thanks,Pete
45degree offset tin snips will be easier to cut with, also thanks for all your content
im really looking forward to these videos. it would be my dream to own one of those. id restomod it and turn it ev. these bugs are so cool
Thank you!😎
cool work
best wishes from Germany
Thank you very much! =)
don't worry about our patience. we love the process. Go as slow as you want.
they say the turtle wins the race....=)
Great job 👍. This is one cool Volkswagen ... keep up the amazing work 💪
Thank you! 👍
Nice job, i love this car and his history,the process of restoration,thanks for your vídeos.
Glad you enjoy it! Thank you! =)
Brilliant job mate im really enjoying this series. Bet you cant wait to drive it 😊
Thanks buddy! yes, it's going to awesome! Soon hopefully. =)
If you would use lukewarm water and add a little detergent or any soap, you could reach the next step in applying silicone or any other kit. But either way, we love watching you making a mess or whatever. Never stop. You’re getting there 😊
I’ll try to remember that next time!😎
+1 Dish soap on the tip of finger to apply silicone ! :)
Great work on the beetle 👍
Glad you try the tip about the trick for make it easier with sealant =) it makes it a little easier 😊
great job coming along really well.
Thanks 👍
There is a stuff I can recommend for protecting the underside of the car: it's an asphalt - based coat that in Germany sells under the brand name "Teroson." What is interesting here that this is not a kind of lacquer or paint, but a spray - on flexible stuff that applies in a rather thick coat - it's meant as protection against sharp objects & moisture. I am certain that some similar products are on the market in the US as well.
All the best & good luck!
I remember (way back) when you were pressure washing that car .. The paint label in the front cargo area said Perlweiß (Perl Weiss) -> Pearly White .. 😯not almond !😯 ...Epic Thumbs Up on the progress !
😇❤
Definitely looking good 😊
Thank you! 😊
You sir are an inspiration thanks for the great videos
I appreciate that! Thanks for keeping me motivated! =)
Cool CT! Fittin pretty good!
Yes, not too bad. Thank you! =)
Really enjoying the videos. Watching you learn as you go on your own vehicle is inspiring.
Great job done
Good to see the progress CT 👍🏻
Looking sweet CT iam digging it alot👍👍
Thanks Atom! 👍
@@CTmoog no problem buddy 👍😎
Man Ct, That’s some great metal work! You make it look easy! You have patience and skills.👌😎👍it’s looking great! Looking forward to seeing more!
i love the interior color. So nice.
Those strips that you are calling spacers is Fender Welting. The rusted out part behind where the headlight goes is the Headlight Bucket.
Well done CT.
Those fenders makes the car lightwheight😊
HAHA! =)
Strong work on the fenders so far.
Thanks man!
This entire build has been so great to follow. I appreciate you sharing the little details and what you've learned. Can't wait for it to come together!
Thank you! There are a ton of details! =)
I' m glad you used "dish cleaner water trick".
Everything is looking fine 👍 CT.
If you do the metal cutting without gloves , I can't look at 😯
Gasoline F or C is very good for smoothing the joint. ;)
Great job CT, you can buy new headlight buckets and glue them in i saw Duckman do it, they are called fenderbeading.
It's looking good - 👍
Thanks 👍
Good.job. cool car VW
Thumbs up sir!
Thanks man!
Those square fender bolts you have work the same way as the shiny silver ones, they go on the backside and you hold them there then bolt the fender through it. they just look more OEM and tidy from the backside is guess
Lol, nice Mustie reference😆
Hi CT, love the metalwork videos
Thanks Tim!
I have been watching your renovation of the VW Beetle from the very beginning. Each part is very interesting! I hope you complete this project successfully soon. Good luck. I jelaous your talent and you technical abbilities.
Best wishes from Poland.
Those fenders came out cherry!!
Really good
Thanks!
In extreme high temps, body filler, primer, seam sealer, etc. can be chilled in a refrigerator and give you more work time.
I'm old enough to remember walking to the VW dealership and buying some of those patch panels from the parts department. Those things that go between the fenders and the body used to come in rolls. It's called welting.
Fot the rusted out headlight inner i believe its the light bucket CT i believe 👍
You can purchase replacement headlight buckets.
Thanks man! I might do that.
Nice job you have been working ⚒️👍❤️🇵🇰❤️
There is available a plastic, spray can handle and trigger . It clips over the top of a rattle can and gives you greater control and comfort, using rattle cans. Saves the index finger from wearing out 😊
Saludos de Mexico CT
Thank you! 👍
Your axel boots need to be turned to the side Bolts toward the back Or they will split prematurely from up and down flexing of the axel
One of the last steps I recommend if before you have it ready to put wheels on it and drive away, spray the inside fender areas and bottom of the floor with some pick up bed liner. Nothing thick but enough to protect the paint and metal from being chipped by the rocks you kick up while driving. It also adds another layer of water and rust proofing.
Love your vidoes. Been a while as Yahoo screwed up my subscription list but glad to see your back!
CT bus rusty eddies to the grocery list to repair a rusty, the bus directions to the D4 while
❤
Like i mentioned that last tube just seemed defective, when you were applying it, it LOOKED dry and crummy. that new tube there is coming out way more peanut-buttery. lookin good.
Yes, you were correct. I had two that were not good...The other two seamed ok.
Just a little suggestion. When cutting metal with snips, as a tin nocker ,get a pair good offset snips( lefts & rights. I prefer Midwest brand) never take your snips the entire way closed every time. That causes those little shark teeth along the lenth of your cut & that will tear you up. When you get good with quality snips you'll use them more often than any power tool. Practice practice with red in rt hand & green in left hand. You'll be amazed. Nice job on restoration. No criticism just passing along knowledge.
Hola, saludos desde Chile, good job, un abrazo
Great job as usually. I wonder If you have forget the "Trusty Rusty"😊? Regards Stig Österberg from Dalsbruk in Finland.
He sold Rusty.
I know you guyes call that thing Beetle in America. In Norway we call it bubble directly translated. Cuse of the shape and sound
That's interesting! It's does have some bubble shapes for sure. Thank you! =)
I am thinking that maybe you can use epoxy panel adhesive for those nutserts in the fenderwell. Maybe hold them with a magnet while the adhesive dries.
Good idea!
Always spray left and right not up and down, you’ll get a better spray pattern and better coverage
good tip thank you!
Hey, mate - you're doing so well - I hope you're proud of your progress, you certainly should be. You've come so far!!
You can buy new headlight bowls to weld straight in - no need to find a good used fender to take an old bowl from. I don't think WW do them, but have a look at BBT.
The plastic strip that goes between the fender and the body is called the wing/fender beading.
The fender nut thingy that replaces the little square bit that fell out - just make sure you push the threaded bit through from the outside to the inside. That cylindrical threaded bit should be visible inside the trunk, if you get me. The fender bolts up to the flat part👍.
As to your dialogue at the end - yes you still have a long way to go and loads to do, but just look at how far you've come in a year, man! I remember the car being so full of twigs and raccoon poop that you had to literally fork it out with garden tools. It's great, we're all with you. Keep it up mate. x
The strips that go between the fender & body are called “fender beading”. The headlight piece is a “bucket”. This seam seal job looked way cleaner. That other tube seemed dryer, at least in the video. Maybe it was old or the temperature was hotter? 🤷🏻
Use a brush to finish off the seamsealer, Thats hot it was done in the factory. Looks better, works better. Do a little bit a time, then you won't have problems with the seamsealer developing a skin in the heat and looking ugly when finished.
you could have used the template of the other fender and turned it upside down. would come out perfect on that lower rear front fender.
Any chance for pop-out windows in the back to stay cool, or business coup? Another awesome restoration video CT. Gotta love those VW's.
Hi CT, any chance you could show what the spare tyre area you welded looks from under the car? I'm doing that same area at the moment and would love to see what it looks like. Cheers, Bash
Great work. What welding helmet are you using?
Começando a ganhar forma.
Thank you! =)
I use a epoxy primer when I have bare metal to help seal it in. But that just me. It’s a little pricey but worth it.
You might try metal epoxy to fix the fenders. That way your not messing up the patina
yes that's a good idea.
Hey, impressive work! Can you share the dimentions of the body trolley? Looks awsome!
Thanks man! Yes, I will measure it today.
Why are you not using the rotisserie to do the restoration on the bug? I just purchased like yours and would like to see how you attach it to the bug body.
Looking awesome. How are you gonna do the interior?
He’s going to redo the whole thing. I told him he needs to get the new headliner in before he installs the window glass.
Thanks CT get yourself some paint buddy
Dang man! Thank you! =) =) =)
Get another front fender and repair the back edge with it and the light bucket.
Great work but some gloves may help your hands not getting cut. 😂Anyway you are a professional restorer.
👍👍👍✌️✌️🆗️
Dont forget to make a drain hole in the bottom of the wheel well in case water gets in.
👍🙋♂️
Hey CT, is this car a classic I was thinking why would spend so time doing all this work on this Beetle?