Im currently trying to build a baja warrior with a gx270 (same size as a 301) and this is really helping. I didnt know what i was going to do about fitting the engine on and the air filter but i think i will do what you did.
I am new to mini bikes I bought a used mini bike a Baja Blits 97cc. But it does not have enuff Tourge to get up the little hill I need it too :/ Any advice? I bought some sea foam and used that to clean the gas tank and Carb but no luck yet... the engine cuts out too... what should I do?
You have alot of choices here.. -buy a net motor from harbor freight for 120 dollars -change rear sprocket to a larger size -or..it could be you need a new clutch.. Truth is your possibilities are endless..I hope this helps..feel free to ask more questions and I will try and help..thx for watching friend
Bada$$! 👍 i cant wait to test out my baja now after seeing his again...i have the same clutch(comet 1"/420)but i have a predator 301cc 8hp...when you get time could you let me know what gearing front/rear he has on his...im sure i have the same rear sprocket
Cool thanks....yea it should i havnt messed with it....wait till you see it....impulse buy,saw it pop up on cl sat morning and hopped in my suburban amd drove 2 hours each way for it...$150😂 everything brand new only 15 mins on it...jetx3 bigger and imulsion tube,exhaust,intake...i have to count the clutch sprocket....i want to get a torque converter for it if i dont sell it/flip it.....it would be better for in the woods messing around
17:00 what causes the tire to spin and how do you make it stop spinning? I read in the comments on another video where the guy started his up and his mini bike went flying into the side of his house causing damage to his mini bike. So I want to avoid that happening since it seems to happen to a lot of people and catches them off-guard.
Badass! I’m looking to build a mini bike. I’d love to put a 420 on but can’t seem to find a frame that would hold a motor that size. Any pointers? You can really tell when your bike hits the sweet spot. Seems to open up
What kind of clutch did you use where you get it from and how long did it last I bought a clutch that was ready for 13 horsepower less than about a week and a half from my 357cc Yamaha now I bought a torque converter that's also rated for f****** 13 horsepower less than about the same amount of time because I thought my motor was only 10 horsepower sandbag myself
Do you have it on a minibike or a gokart?...we got this one from ebay for 100 dollars..its holding up so far but is slow out of the hole..65+mph..these clutches for the big blocks don't hold up on gokarts..its just to much weight..unless u gear it down bigtime
the only thing that kind of scares me. i think you need some kind of gusset under the tank, front triangle area. pretty sweet. i also like the air cleaner adapter. good work guys
What kind of clutch did you use For this build because I built the same bike with the same motor but a lot of people told me that the clutches on the 420 burn out a lot faster
@@GoKartsorGoneFishin no problem man. I got a 420 hemi im thinking about putting on my CT200u, you guys gave me the inspiration. 🤘🏻Its so cool to make a mini bike beat up on quads and drit bikes
Ikr I thought it was either cape coral or n ft myers I moved down to cape coral back in 05 and built a new house for cheap than the housing recession hit in 08 and I moved back to ct but I love how flat and straight the roads are down there I would love to be able to open up my monster moto with a built 212 and see what it could do
@@boatdoctors no he was holding choke cause high vibrations cause it to shut itself thus killing the engine so he has to hold it. I've done this before
I bought a coleman ct200u-ex has the 6.5 love it but i bought a 420 predator to slap in it what all do i need for the swap i seen that the 6.6 has a 3/4 shaft on it and my 420 is 1" correct can you send me links for what i need like my centrifugal clutch i nerd and any other little stuff....man yours is bad af btw great job smart Ingenuity
So I have never 420 swapped a Coleman but you will need the 1 inch clutch www.amazon.com/Chain-Centrifugal-Clutch-Sprocket-Engine/dp/B084D5ZDHJ/ref=mp_s_a_1_6?dchild=1&keywords=1+inch+clutch+for+go+kart&qid=1587575359&sprefix=1+inch+clutch+&sr=8-6 Hope that helps..
@@abdulkamau2862 it's not about the power..its about the torque..that 301 will have way more torque than a 212 and will allow you to adjust the gearing for the best acceleration and top speed!
@@GoKartsorGoneFishin I agree. It would make a great video. No one has really put out a video on it. I have did multiple carb installs but dont really you tube them. My friends tell me," you need to show people want you do in your garage"! I can never get around to it though,,,😬
Just built air cleaner adapter,from your design...worked great!have a 420cc predator in a old Manco Deuce
That's awesome man..hope it holds!..we broke ours already..lol..thx for watching!
@@GoKartsorGoneFishin ill do a short video tomorrow and show the adapter and the manco deuce,let ya check it out,i comment when its up
@@GoKartsorGoneFishin videos up...check my page
instablaster
So does that engine not need back pressure?
That intake was genius!! The exhaust looks great!! Man that thing was booking!! Those 420’s ain’t no joke.
That thing was hooking... was that what you meant buddy??
@@jasonkowal5021 no lol😂😂 he meant booking it means it was goin fast as hell
impressive, I really like the way you did the air filter, and the exhaust sounds sweet. A 63 mph top speed is pretty impressive too.
Not for a 420 my 221 goes 55
Man, mine goes 105 mph !
@walt krindlpleth i have the same mini bike and engine i wanna get the 420cc
My 79cc goes 45mph
65 MPH!! Impressive!!!
That’s the kinda mini bike I’d like to have!!!!
Good job man!!!
Thx man..still a couple good videos on this bike..its a ripper
That's fast enough to get a helmet for me lol thanks I got my stickers yesterday! Love the air filter and exhaust!
Wow and all stock and did 63!!! Mph Thats so cool!!!!
ridin in slides is a good way to get a pegleg, there, matey...Arrrr
Looks like a blast to ride 😁.got my stickers today thanks Nate👍👍
Daaaayyyyyyyyyuuuuuuummmmmmnnnn! That thing moves out! I love the air filter solution, great idea!
Man, that minibike is nuts !
Thx Mark..I busted my but building it!
I'm a fan at first site . I love it so much I'm gone build a bike off this design
He'll ya man..thx for watching and good luck!
Wow that thing is flying 63mph on that would be scary fast
Got my stickers today thanks Nate. I will send some of mine. Love the build. Awesome.
Happy to hear u received your stickers already! 😁
@@mrsgokarts9486 thanks. I will be sending some back.
40 series TC. would take up alot of your slack in the chain. Might have to run a chain roller tensioner on it. Thats along chain travel.
That exhaust sounds sweet. Thanks for sharing. Dropping in from farmall fanatic
Im currently trying to build a baja warrior with a gx270 (same size as a 301) and this is really helping. I didnt know what i was going to do about fitting the engine on and the air filter but i think i will do what you did.
Sweet..let me know how it turns out..thx for watching!
I forgot to check mail yesterday but when I checked it I had GKGF MAIL I was happy thank you
Your welcome 😁
Am in the process of building one homie. Keep up the good work guys. I will be using your video to help Me build mine.
Sweet man..thx for watching friend!
Did u check out part 3..you should see what we did with it
@@GoKartsorGoneFishin yes am checking it out now. Pretty good guys. AM sand blast my frame down.
Great video! This is exactly like what i want to build!
Great work NATE. That thing is sweet.
The motor look upside down the head is in the front usually for the air cooling
I should have a video coming soon. I got some more funds in and waiting on my goodies to come in.
gearing seems spot on!
What are the handle bars on the chair? Want the same
I can't wait to Build mines Up I subscribed motivation 🙏💯
Thanks man!
I got the stickers Nate today July 2nd thanks bro
what clutch d’yall use?
I am new to mini bikes I bought a used mini bike a Baja Blits 97cc. But it does not have enuff Tourge to get up the little hill I need it too :/ Any advice? I bought some sea foam and used that to clean the gas tank and Carb but no luck yet... the engine cuts out too... what should I do?
You have alot of choices here..
-buy a net motor from harbor freight for 120 dollars
-change rear sprocket to a larger size
-or..it could be you need a new clutch..
Truth is your possibilities are endless..I hope this helps..feel free to ask more questions and I will try and help..thx for watching friend
Swap the 212 HF predator engine 6.5hp it fits nice
Great video Nate
*Looks And Sounds Great!!*
Thats fast anuff to be street legal.
Nice work bro
I love this build how fast did she get up to!!!!
64 mph..scary fast..thx for watching
Its gotta be quieter so you can buzz around with stealth ...
Bada$$! 👍 i cant wait to test out my baja now after seeing his again...i have the same clutch(comet 1"/420)but i have a predator 301cc 8hp...when you get time could you let me know what gearing front/rear he has on his...im sure i have the same rear sprocket
I think it's a 50 tooth on the rear and a 16 on the clutch..and I think all the rears are the same..I think..hmu if u have anymore questions brother!
That 301 should pull just fine tho!
Cool thanks....yea it should i havnt messed with it....wait till you see it....impulse buy,saw it pop up on cl sat morning and hopped in my suburban amd drove 2 hours each way for it...$150😂 everything brand new only 15 mins on it...jetx3 bigger and imulsion tube,exhaust,intake...i have to count the clutch sprocket....i want to get a torque converter for it if i dont sell it/flip it.....it would be better for in the woods messing around
17:00 what causes the tire to spin and how do you make it stop spinning? I read in the comments on another video where the guy started his up and his mini bike went flying into the side of his house causing damage to his mini bike. So I want to avoid that happening since it seems to happen to a lot of people and catches them off-guard.
Sounds like you have a bad clutch or no clutch
Badass! I’m looking to build a mini bike. I’d love to put a 420 on but can’t seem to find a frame that would hold a motor that size. Any pointers?
You can really tell when your bike hits the sweet spot. Seems to open up
If you wanna 420cc u almost have to mod the frame..haven't found one yet that will fit this motor without mods..thx for watching friend
Coleman mini bikes with little modification works well
Hell yeah!
Nasty, as promised! :D
What clutch is that /where did you buy it please lmk 🕺
Amazon my friend
Great job on the bike👍
Maybe invest in some helmets
Thanks friend..and your 100% right
Did you need to modify the engine mount plate to pull the engine on?
Yep
@@GoKartsorGoneFishin what did you do to it? I have the same frame and I’m trying to put a predator 420 on my bike.
@@dirtyoatmeal7377 go to my Playlist..I have a video on it
Did you have to rejet?
We hadn't but I'm sure it would have ran better if we did..thx for watching friend
What kind of clutch did you use where you get it from and how long did it last I bought a clutch that was ready for 13 horsepower less than about a week and a half from my 357cc Yamaha now I bought a torque converter that's also rated for f****** 13 horsepower less than about the same amount of time because I thought my motor was only 10 horsepower sandbag myself
Do you have it on a minibike or a gokart?...we got this one from ebay for 100 dollars..its holding up so far but is slow out of the hole..65+mph..these clutches for the big blocks don't hold up on gokarts..its just to much weight..unless u gear it down bigtime
This buld is awesome, about to start a 420 swap in my ct200u. What kind of clutch setup are you using on this bike?
We got the clutch off ebay..pretty much the first 1 inch clutch that pops up..and it seems to be holding up..thx for watching
So how do you do a build like this? I have a custom built mini chopper im thinking about engine swapping for this engine
🤷♂️jus did
_Are you going to change the clutch setup to a Torque Converter or?_
I would be scared of that long chain LOL!
Hopefully one day..good point about the chain..thx for watching
I’m a heavy rider would this damage my bike?
We give that bike hell to this day..
I want upgrade to a 420cc but I’m hitting 63 mph stock with the 224 straight chained
Nice!
@@GoKartsorGoneFishin I imagine the torch itself would be worth it
What size sprocket you got or your gear ratio
60t
Oh Ya Baby
Looks good
Thx friend
Exend that right peg out 3 inches for foot room.
the only thing that kind of scares me. i think you need some kind of gusset under the tank, front triangle area. pretty sweet. i also like the air cleaner adapter. good work guys
She definitely could use more work..part 4 should be out one day..thx for watching and the sub new friend!
liked & subed
Is this completely stock governor and all
What kind of clutch did you use For this build because I built the same bike with the same motor but a lot of people told me that the clutches on the 420 burn out a lot faster
They do..
@@GoKartsorGoneFishin so what’s the best thing I should do buy a lot of them
@@demiibjohnson4806 yep..lol
They last a good bit..plus you can get 65mph out of em
Clutch sounds like its junk
Thats so badass
Thanks Friend!
@@GoKartsorGoneFishin no problem man. I got a 420 hemi im thinking about putting on my CT200u, you guys gave me the inspiration. 🤘🏻Its so cool to make a mini bike beat up on quads and drit bikes
What is the cut size and the sprocket size
60 tooth
But doesn't it need back pressure?
Nah
Alright then the engine I on my warrior is the stock engine it needs back pressure I guess
I want to do a single chain but I need to get a long chain what size chain your running
I believe its 40..thx for watching Friend
Where did you get the green gas tank?
It's a fake gas tank..the real tank is under it..that's a 80cc gas tank..thx for watching friend
Will the predator 420 fit my Massimo warrior 200
Probably not friend...but I'm not familiar with that bike..thx for watching Friend
Whats the gearing/tire size?
What size end cap did you use?
What do you mean by end cap?
Looks like Lehigh acres Florida
Vero Beach my friend..thx for watching!
Ikr I thought it was either cape coral or n ft myers I moved down to cape coral back in 05 and built a new house for cheap than the housing recession hit in 08 and I moved back to ct but I love how flat and straight the roads are down there I would love to be able to open up my monster moto with a built 212 and see what it could do
What sprockets did you use ?
60 tooth
What kind of clutch .. website ?
Ebay bud
Do you have the governor in
Still has a governor..all stock except air filter and exhaust
Did you see him pulling on the governor lever. He's manually bypassing it.
@@boatdoctors no he was holding choke cause high vibrations cause it to shut itself thus killing the engine so he has to hold it. I've done this before
What bars are those
Harley
Yep
How fast she go
65mph..and that's with a clutch!..thx for watching friend!
Can you send me the engine link?
www.harborfreight.com/13-hp-420cc-ohv-horizontal-shaft-gas-engine-epa-60340.html?event_id=182708&campaignid=19230525088&adsetid=150063555051&product=60340&store=721&gad_source=1&gclid=CjwKCAjwrvyxBhAbEiwAEg_Kgh2cNCpizmPeQ-c6xsRzGLGYQ_8ZviuQ7-FVCh7NW7R9HaI8fCSGQBoCBU4QAvD_BwE
@@GoKartsorGoneFishin thank so did this work and stay working or did it break
@@lightanddarkness9387 still works
@@GoKartsorGoneFishin awesome thank you
I bought a coleman ct200u-ex has the 6.5 love it but i bought a 420 predator to slap in it what all do i need for the swap i seen that the 6.6 has a 3/4 shaft on it and my 420 is 1" correct can you send me links for what i need like my centrifugal clutch i nerd and any other little stuff....man yours is bad af btw great job smart Ingenuity
So I have never 420 swapped a Coleman but you will need the 1 inch clutch
www.amazon.com/Chain-Centrifugal-Clutch-Sprocket-Engine/dp/B084D5ZDHJ/ref=mp_s_a_1_6?dchild=1&keywords=1+inch+clutch+for+go+kart&qid=1587575359&sprefix=1+inch+clutch+&sr=8-6
Hope that helps..
@@GoKartsorGoneFishin yup thats it thankyou ill keep you posted with the build sir
@@WoodsPeople740 how did the build go ?
Are ya'll in VLE?
Yep
Nice
Thank you for watching friend!
@@GoKartsorGoneFishin u welcome no problem I'm trying to get a 301 predator together
@@abdulkamau2862 oh nice!
@@GoKartsorGoneFishin how much faster is it than 212cc predator engine
@@abdulkamau2862 it's not about the power..its about the torque..that 301 will have way more torque than a 212 and will allow you to adjust the gearing for the best acceleration and top speed!
Are u willing to sell it to me ? And if so how mutch?
Not for sale friend...it wouldnt go for less than 1200 bucks if I had to guess..
Go Karts or Gone Fishin oh ok I understand and I would probably go for 2000
Throttle response on those carbs are trash. Why not just buy a vm 34 and get the most out of that engine?!
It should happen in the future friend..thx for watching!
@@GoKartsorGoneFishin I agree. It would make a great video. No one has really put out a video on it. I have did multiple carb installs but dont really you tube them. My friends tell me," you need to show people want you do in your garage"! I can never get around to it though,,,😬
@@brokensmile8487 will do..keep your eyes open..we may do it soon!
@@GoKartsorGoneFishin you bet. I'm sub'd.
It's too lean in every video of it.
U right