This was an excellent explanation of your machine. The flow of your narrative was clean and concise. Both in how you explained What and Why every choice was made. Its a very cool rig and shows a lot of foresight into its design.
Like many others came here from Mike Festiva and just for your information, love the channel name, easy to remember whats going on. I like this little critter and see some great ideas floating in and out... yes on like n subb.
Dude thAt things a tank with out a gun ,ur pretty laid back on what u built ,be proud ya did a great job man ,i been into this kidda thing lately n think im gonna try one to but i dont think its gonna be anything like what u built,freaking nice job bother.....
Very Cool. One of the best home built tracked vehicles I've seen. I always wanted to build one and I think I'm ready now. Does it track straight or does it require corrective nudges on the steering to keep it going straight?? I always wondered if a limited slip/open diff would work. Are you a tracker? I saw the YAT YAS on the back. Great vid!!
Oh yeah it requires corrective nudges at high speed over 20mph, although I've driven controlled diff machines that wander too at speed. I wonder if a limited slip would compromise steering ability with high speed running? Do they make LS diffs that turn off&on? Not an amtracker, I thought the acronym was fitting for the machine. I don't know if you're interested but I will be releasing more plans/kitsets soon: www.decentmfg.com. It's not the cheapest kit out there but it might be useful and save you some time. Good luck on your build, will be nice to see more homebrew tracked machines on CZcams!
I'm building ground up tracked vehicle and your vid certainly was helpful. Great work. You said dual caliper, which isn't surprising. Wondering how your steering/diff is holding up?
Awesome build man! I've had something similar on the drawing board for awhile! I have a few questions/thoughts: Have you been in a situation where the vehicle either gets stuck or doesn't track straight due to the open differential? Also, I plan to use mine as a utility vehicle so a space for cargo would be needed. What are your thoughts with a similar design but utilizing an engine and trans axle out of a Front wheel drive car? Again, awesome build!
Thanks. Yes I have gotten it stuck several times (there is a video on youtubes in swamp goo). Over 15mph it does track a bit, relying on quick corrective motions from the driver. This is mainly due to the "stubbyness" of the vehicle, a compromise to skid steer easier. I have a customer up in Canada who put a 1.6l VW diesel in his machine. It goes slower, but he said it will climb his snowpiles at idle in low gear. He locked the transaxle diff with by welding.
Nice build! Those Russian machines are an inspiration indeed. Those guys are ingenious and highly creative. I have always been curious about this type of drive system. Do you run one of the transmissions in reverse to get forward motion? I don't see How it would work otherwise.
Nice build! Few questions & tips tho... Why such heavy steel skin, why not a simple ladder frame? Will it float? A $30 GM alt is easy to fab up to charge battery, and smaller bore master cylinder will equal greater pressure at caliper.
Thanks! Yep it floats! If you check out my newer vids I did end up adding a chevy alternator to the yota for electric fans and such. I opted for the fabricated sheet steel because it was less time consuming to produce compared to cutting a tube steel skeleton and then skinning with sheet steel.
Torsion bar, or that fancy trailer suspension axle dealio, where you take a square tube, slide four round stock bars of rubber, set them in the four corners, and put a square bar to which you've welded the axle or whatever setup you want (they have a lever type arm). Seems pretty efficient to me, and compact. The actual name escapes me atm, but it works pretty well from what i've seen. Also, ditch the cast teeth, and get yourself some phenolic, for true Russian engineering. I kid, but it's actually much better, as it takes a lot to wear it down, but it's not hard enough to damage the track either.
Yeah I think the trade name is torflex or something. I kinda like the idea of a steel torsion bar setup, maybe it comes from my interest in tanks lol. Regarding the poly sprocket teeth, they didn't experience too much wear, even through sand and rock I ran through. To each their own I suppose.
Out of interest if you reversed the transmission with the engine at the front and the drive at the back would your beam suspension then work?, while having the engine at the front would be less good for weight distribution it would give you more usable cargo space, always had a soft spot for tracked vehicles.
Awsome build man I recently thought of wanting to become a dirt bike mechanic but or just know mechanical parts in general so what knowledge would you need to be able to build a tracked vehicle like that just a mechanic or mechanical engineer and other skills like welding ?
Getting into mechanics isn't too hard if you follow the right people. It's easy to learn with the power of the internet nowadays. I'd recommend seeing if you can get summer/part time job wrenching for a shop to learn and see if it's what you want to do as a career. Regarding automotive electrical, it's becoming more difficult avoiding today's computer controlled internal combustion engines. There are options like industrial diesels, pre 80s gas and diesel engines where electrical is minimal. I don't think computer controlled ICEs are as bad as people make them out to be, just label your connectors on the wiring harness and sensors when reassembling. The simpler stuff is becoming harder to find, so it's good to learn about it.
@@pinestumps8622 thanks brotha for your reply and your scout tank looking design definitely intrigues me and enspires ordinary people to also build cool invention like that but definitely I will look into getting a wrenching job and slowly learn my way around and I’ll try to go for diesel vehicles lol the og not this electro Tesla bs of today lol but thanks for ur advice godbless !
Oh are you talking about drop center tracks like on a bombardier or nodwell vs tracks with separate tire guides like on mine? Really it is a matter of preference, the one disadvantage I see with drop center tracks is the small contact area on rock and hardpack, apparently this issue breaks lots of nodwell grousers. However the simplicity and economy in those drop center tracks is undeniable.
So whats the story on making it turn right to left, is it a limited slip differential, and all you have to do is have brakes either side and lock the right or left side, making it work? i kinda thought if you tried to brake one side only that it would try and spin it.
Ok, so what is the secret for setting up the differential so that it doesn't free float on one side, without locking the axles? Which seams would negate the brake steering.
Secret is the BRAKES!! lol. Not a big secret though!. Most everyone knows if you use the brake on the left, Then the right will pull!!. You're over thinking it bud!!!. It's a really simple system.
I am thinking next year "modernizing" the undercarriage with steel torsion bar suspension and replacing the differential axle with a clutch brake unit. The chassis has been great to me over it's life, I even managed to crumple the front 3/16" glacis plate on a boulder lol
And another one: How would it go with a 4x4 transmission that has a low ratio option? My Mitsubishi Pajero (Shogun) has this, and locks both front and back prop shafts together.
@@kieranh2005 that should work, you wouldn't need a second transmission then. Plus you could run a propeller or jet drive off the the rear side of the tcase
Very cool, your video is very detailed and well done. You could opt for a leaf spring setup with house trailer axles for the idlers instead of torsion bars, wouldnt ride as good as coil springs but simpler. Also, what about moving your braking system, rotors and caliper to the rear dead axle? I have been toying with a track vehicle lately myself and you have given me some good ideas. I am looking for sprocket ideas and this helps. Check out this link, these guys are the kings of track rigs, I have rode years ago, also, automatic into a standard is the way to go, gives you the control with the auto and the manual trans gives you gear reduction. browardairboat.org/airboats-and-buggies
Really the only way to make your tracks completely rustproof is by using heat treated aluminium or stainless steel. Paint would just wear off after several hours of use.
@@pinestumps8622 Well i would have opened my own Tank company if i can cast heat-treated aluminium. OK, the tracks will eventually rust off... Thanks for the reply, goodluck on your upcoming projects
Would it work if you limited the walking beam? I build a trailer timber forwarder and had same problem with it coming too high and the wheel catching..I limited it and problem went
I actually did limit it at first to prevent wheel collision. However, this did not solve the instability issue of the walking beam. What I found is when 2/3 of your track base is on a pivot, the vehicle becomes unstable on grades. While you could theoretically create a sprung walking beam with leafs or coils, I decided just to lock it out. How is your tracked build going?
Pine Stumps keeping simple sounds good! Mine is starting again! Shortening axle didn’t work as well so using a full width one. Liked the plans and kit you’re selling.. Advertise them in the FB group if you like?
Cost me around $5k. Costs can vary though depending on where you live, I've had Canadians build this rig from the plans and the costs were $7-8k USD. Just an FYI...
@@glennmartel7115 I've thought about building a Carden Loyd style rig in the past, like a bolt together TKS tankette kit. Problem is, to do it right, you gotta go all out and cast the track links, 1/4" steel hull, etc. which adds up in cost. If you are seriously interested I can scope the project out, but it might take awhile as I am putting my time into other pursuits.
@@pinestumps8622 Thanks for the response, I wanted to know what your capabilities are, obviously you have the skills....trying to figure out if it's cheaper to refurbish an original as opposed to scratch building ...where does your knowledge on Russian armor come from?...a replica TKS kit would be cool...many ideas running through my head....where do you think your current deign could go?...uparmored version?
Check out ShawnCFarm on CZcams, he bought an old carrier from a junkyard, slapped a motor in it and put a truck cab on top, called the Tankenstein I believe. That would be most cost effective way, if you can repower one from the scrapyard. I think a repro-mod kit makes sense for rarer vehicles like the smaller inter-war Carden-Loyd style machines. You could probably replace the entire lower tub portion with 3/16" steel if you really wanted to, you just reduce payload capacity. I've hit boulders at 3mph and the 1/8" steel belly holds up just fine. Just my 2 cents...
Столько работы- и что бы сделать такую уёбочную тележку,непорнятно зачем и для чего! Зашёл бы на сайт МО (на распродажу списанной техники) да купил бы БМП ! А после рестоврации то была бы вещь,на все случаи жизни...
Came here from Mike Festiva.
I’ll be checking out this build.
Ditto. Pretty cool stuff!
I know I'm kinda randomly asking but do anybody know of a good place to watch new series online ?
@Muhammad Brock i would suggest flixzone. You can find it by googling :)
@Flynn Javier definitely, I have been using FlixZone for since march myself =)
@Flynn Javier Thanks, signed up and it seems like a nice service =) I really appreciate it !!
Referred by our friend Mike Festiva! Great looking build.
This was an excellent explanation of your machine. The flow of your narrative was clean and concise. Both in how you explained What and Why every choice was made.
Its a very cool rig and shows a lot of foresight into its design.
Thanks! Tried my best to keep it brief yet informative.
Like many others came here from Mike Festiva and just for your information, love the channel name, easy to remember whats going on. I like this little critter and see some great ideas floating in and out... yes on like n subb.
Just got your package in the mail. Can't wait to get started. Even my wife is excited to build it. Thanks Killian!
Awesome! Feel free to reach out to me if you have any questions or suggestions for improving the plans & kit.
Motorcycle coil over shocks might be a viable alternative to torsion bar suspension. That could tame your reverse problem, at least.
Dude thAt things a tank with out a gun ,ur pretty laid back on what u built ,be proud ya did a great job man ,i been into this kidda thing lately n think im gonna try one to but i dont think its gonna be anything like what u built,freaking nice job bother.....
Nice build!
Very nice presentation good luck with your ride.
One power train idea is a hydrostatic transmission / closed loop hydraulic drive
Similar to what some zero turn mowers use
good to be here man... your buddy sent me over
Very Cool. One of the best home built tracked vehicles I've seen. I always wanted to build one and I think I'm ready now. Does it track straight or does it require corrective nudges on the steering to keep it going straight?? I always wondered if a limited slip/open diff would work. Are you a tracker? I saw the YAT YAS on the back. Great vid!!
Oh yeah it requires corrective nudges at high speed over 20mph, although I've driven controlled diff machines that wander too at speed. I wonder if a limited slip would compromise steering ability with high speed running? Do they make LS diffs that turn off&on? Not an amtracker, I thought the acronym was fitting for the machine. I don't know if you're interested but I will be releasing more plans/kitsets soon: www.decentmfg.com. It's not the cheapest kit out there but it might be useful and save you some time. Good luck on your build, will be nice to see more homebrew tracked machines on CZcams!
I'm building ground up tracked vehicle and your vid certainly was helpful. Great work. You said dual caliper, which isn't surprising. Wondering how your steering/diff is holding up?
Nice! Might be able to make a caliper bracket that will relocate the caliper out of the way.
Awesome build man! I've had something similar on the drawing board for awhile! I have a few questions/thoughts:
Have you been in a situation where the vehicle either gets stuck or doesn't track straight due to the open differential?
Also, I plan to use mine as a utility vehicle so a space for cargo would be needed. What are your thoughts with a similar design but utilizing an engine and trans axle out of a Front wheel drive car? Again, awesome build!
Thanks. Yes I have gotten it stuck several times (there is a video on youtubes in swamp goo). Over 15mph it does track a bit, relying on quick corrective motions from the driver. This is mainly due to the "stubbyness" of the vehicle, a compromise to skid steer easier. I have a customer up in Canada who put a 1.6l VW diesel in his machine. It goes slower, but he said it will climb his snowpiles at idle in low gear. He locked the transaxle diff with by welding.
So nice
Nice man!
Nice job
saya juga berkeinginan membuat kendaraan seperti ini untuk digunakan di desa saya,terimakasih atas idenya
Let us know when you ready for the flame thrower turret!
Awesome video.....cool machine as well....wanting to build one as well. With the double tranys...... Russian idea.
Nice build! Those Russian machines are an inspiration indeed. Those guys are ingenious and highly creative. I have always been curious about this type of drive system. Do you run one of the transmissions in reverse to get forward motion? I don't see How it would work otherwise.
Differential is flipped upside down to reverse rotation.
Nice build! Few questions & tips tho... Why such heavy steel skin, why not a simple ladder frame? Will it float? A $30 GM alt is easy to fab up to charge battery, and smaller bore master cylinder will equal greater pressure at caliper.
Thanks! Yep it floats! If you check out my newer vids I did end up adding a chevy alternator to the yota for electric fans and such. I opted for the fabricated sheet steel because it was less time consuming to produce compared to cutting a tube steel skeleton and then skinning with sheet steel.
You could use lights so an alternator is a must.
Torsion bar, or that fancy trailer suspension axle dealio, where you take a square tube, slide four round stock bars of rubber, set them in the four corners, and put a square bar to which you've welded the axle or whatever setup you want (they have a lever type arm). Seems pretty efficient to me, and compact. The actual name escapes me atm, but it works pretty well from what i've seen.
Also, ditch the cast teeth, and get yourself some phenolic, for true Russian engineering. I kid, but it's actually much better, as it takes a lot to wear it down, but it's not hard enough to damage the track either.
Yeah I think the trade name is torflex or something. I kinda like the idea of a steel torsion bar setup, maybe it comes from my interest in tanks lol. Regarding the poly sprocket teeth, they didn't experience too much wear, even through sand and rock I ran through. To each their own I suppose.
Very impressive my friend. Very impressive.
Out of interest if you reversed the transmission with the engine at the front and the drive at the back would your beam suspension then work?, while having the engine at the front would be less good for weight distribution it would give you more usable cargo space, always had a soft spot for tracked vehicles.
Awsome build man I recently thought of wanting to become a dirt bike mechanic but or just know mechanical parts in general so what knowledge would you need to be able to build a tracked vehicle like that just a mechanic or mechanical engineer and other skills like welding ?
also do you need to know extensive info on electronics or basic know how of them to hook up to a makeshift vehicle ?
Getting into mechanics isn't too hard if you follow the right people. It's easy to learn with the power of the internet nowadays. I'd recommend seeing if you can get summer/part time job wrenching for a shop to learn and see if it's what you want to do as a career. Regarding automotive electrical, it's becoming more difficult avoiding today's computer controlled internal combustion engines. There are options like industrial diesels, pre 80s gas and diesel engines where electrical is minimal. I don't think computer controlled ICEs are as bad as people make them out to be, just label your connectors on the wiring harness and sensors when reassembling. The simpler stuff is becoming harder to find, so it's good to learn about it.
@@pinestumps8622 thanks brotha for your reply and your scout tank looking design definitely intrigues me and enspires ordinary people to also build cool invention like that but definitely I will look into getting a wrenching job and slowly learn my way around and I’ll try to go for diesel vehicles lol the og not this electro Tesla bs of today lol but thanks for ur advice godbless !
Did you ever get some kinda kit for tracks or plans to build one?
Mike Festiva sent us over to check your channel out
Rather than locking out the suspension, may I suggest rubber bumper stops.
Is it better to have keepers on your track or have the track like a snow cat
Oh are you talking about drop center tracks like on a bombardier or nodwell vs tracks with separate tire guides like on mine? Really it is a matter of preference, the one disadvantage I see with drop center tracks is the small contact area on rock and hardpack, apparently this issue breaks lots of nodwell grousers. However the simplicity and economy in those drop center tracks is undeniable.
@@pinestumps8622
That's what I was thinking. Mine has keeper as well, but my new machine has snowcat type tracks
Cool, will be neat to see what you come up with. Guessing that tankenstein needs some company.
Did you use brake boosters on each master?
So whats the story on making it turn right to left, is it a limited slip differential, and all you have to do is have brakes either side and lock the right or left side, making it work? i kinda thought if you tried to brake one side only that it would try and spin it.
It's an open differential steered via brakes.
Ok, so what is the secret for setting up the differential so that it doesn't free float on one side, without locking the axles? Which seams would negate the brake steering.
Secret is the BRAKES!! lol. Not a big secret though!. Most everyone knows if you use the brake on the left, Then the right will pull!!. You're over thinking it bud!!!. It's a really simple system.
instead of locking it up why not just make bump stops to limit the movement a bit
Cool build! Check out Jeep2009's tank!
You need to run a booster to boost ya braking for each master cylinder
Nice.
Also I saw a video of a Russian track that had durotorque type suspension. This would probably be an option for you.
I am thinking next year "modernizing" the undercarriage with steel torsion bar suspension and replacing the differential axle with a clutch brake unit. The chassis has been great to me over it's life, I even managed to crumple the front 3/16" glacis plate on a boulder lol
czcams.com/video/PJK8lMozodc/video.html
Here's the link.
And I found your answer to my next question... flipped diff
And another one:
How would it go with a 4x4 transmission that has a low ratio option? My Mitsubishi Pajero (Shogun) has this, and locks both front and back prop shafts together.
@@kieranh2005 that should work, you wouldn't need a second transmission then. Plus you could run a propeller or jet drive off the the rear side of the tcase
Stupid question: where did you get the tracks? Building a tank for kid for airsoft. Can't locate tracks anywhere.
They're homebuilt
Wait, how is it not going backwards? Is that a front axle section?
The rear end is flipped upside down to reverse rotation
why do you have 2 transmissons?
хорошо получилось
Nice thanks for the video
Put power brake master cylinders and booster and it will steer better
Very cool, your video is very detailed and well done. You could opt for a leaf spring setup with house trailer axles for the idlers instead of torsion bars, wouldnt ride as good as coil springs but simpler. Also, what about moving your braking system, rotors and caliper to the rear dead axle? I have been toying with a track vehicle lately myself and you have given me some good ideas. I am looking for sprocket ideas and this helps. Check out this link, these guys are the kings of track rigs, I have rode years ago, also, automatic into a standard is the way to go, gives you the control with the auto and the manual trans gives you gear reduction. browardairboat.org/airboats-and-buggies
Dude, how do you make the suspension? is it soft? and don't use torsion bar, it's complicated. Coils will do the job
It's just a walking beam.
Oh ok, but it looks like a bell crank, great though. And do you have any idea how can i make my tracks rust proof? i can't paint the tracks can i?
Really the only way to make your tracks completely rustproof is by using heat treated aluminium or stainless steel. Paint would just wear off after several hours of use.
@@pinestumps8622 Well i would have opened my own Tank company if i can cast heat-treated aluminium. OK, the tracks will eventually rust off... Thanks for the reply, goodluck on your upcoming projects
Do you streer with your breake?
Yes
What engine do you have in it
Toyota 20R
where did you get your track belts? part numbers grade?
Atlas belting in Wisconsin. 4ply 1/2"
Do you happen to recall the price you paid for the belting you used to make the tracks???
@@dawnburrows2783 I checked my old invoice, it was $2 per foot of belting.
Ok thanks....
$400 per belt 4 ply
How much did it cost to build that 🤔🤔🤔🤔
Probably like $10k at the time of construction. Steel prices have jumped 4 fold since then, so you're pushing much higher than that nowadays.
What does it weigh?
A little over 1000kg
Would it work if you limited the walking beam? I build a trailer timber forwarder and had same problem with it coming too high and the wheel catching..I limited it and problem went
I actually did limit it at first to prevent wheel collision. However, this did not solve the instability issue of the walking beam. What I found is when 2/3 of your track base is on a pivot, the vehicle becomes unstable on grades. While you could theoretically create a sprung walking beam with leafs or coils, I decided just to lock it out. How is your tracked build going?
Pine Stumps keeping simple sounds good! Mine is starting again! Shortening axle didn’t work as well so using a full width one. Liked the plans and kit you’re selling.. Advertise them in the FB group if you like?
Baby pt 76
COST?
Cost me around $5k. Costs can vary though depending on where you live, I've had Canadians build this rig from the plans and the costs were $7-8k USD. Just an FYI...
@@pinestumps8622 could you build a Bren Gun Carrier?
@@glennmartel7115 I've thought about building a Carden Loyd style rig in the past, like a bolt together TKS tankette kit. Problem is, to do it right, you gotta go all out and cast the track links, 1/4" steel hull, etc. which adds up in cost. If you are seriously interested I can scope the project out, but it might take awhile as I am putting my time into other pursuits.
@@pinestumps8622 Thanks for the response, I wanted to know what your capabilities are, obviously you have the skills....trying to figure out if it's cheaper to refurbish an original as opposed to scratch building ...where does your knowledge on Russian armor come from?...a replica TKS kit would be cool...many ideas running through my head....where do you think your current deign could go?...uparmored version?
Check out ShawnCFarm on CZcams, he bought an old carrier from a junkyard, slapped a motor in it and put a truck cab on top, called the Tankenstein I believe. That would be most cost effective way, if you can repower one from the scrapyard. I think a repro-mod kit makes sense for rarer vehicles like the smaller inter-war Carden-Loyd style machines. You could probably replace the entire lower tub portion with 3/16" steel if you really wanted to, you just reduce payload capacity. I've hit boulders at 3mph and the 1/8" steel belly holds up just fine. Just my 2 cents...
Что он там про русскую машину говорит. Умники перевидети пожалуйста подтвердите свой айку.
Столько работы- и что бы сделать такую уёбочную тележку,непорнятно зачем и для чего! Зашёл бы на сайт МО (на распродажу списанной техники) да купил бы БМП ! А после рестоврации то была бы вещь,на все случаи жизни...
This isn't Russia where I can go down to the local scrapyard and pick up a BMP lol
Mike festiva sent me
Drink every time he says stand point