Amigo que puedo hacer si mi bocina party box 100 le cayó agua por arriba y atrás , la sequé con rapideza pero a los pocos minutos dejo de escucharse solo seguía el juego de luces pero de sonido nada
I have jbl partybox 100, it charge too slow like not charging, I change new lithium battery but it not work, blink only one light during charging, what is the problem, PLEASE reply me
How many pins are on the flex cable connecting the power button and the main circuit board? I need to get a replacement. I luckily only had an issue with the power button board which was slightly corroded after an unlucky rain incident, I was able to fix it but unfortunately the speaker now turns on for no reason and I believe it is because one of the pins in the flex cable is slightly bent.
I used this cable: de.aliexpress.com/item/1005004064351607.html?spm=a2g0o.productlist.0.0.42504c09UaPv3X&algo_pvid=d47d43ba-b8d1-4530-baa0-7371c58ecb06&algo_exp_id=d47d43ba-b8d1-4530-baa0-7371c58ecb06-2&pdp_ext_f=%7B%22sku_id%22%3A%2212000027919489983%22%7D&pdp_npi=2%40dis%21EUR%21%211.52%21%21%211.75%21%21%400b0a0ac216571884976285993eeb03%2112000027919489983%21sea 18 Pins, 30cm. AWM 20624 60V
My partybox 100 works when plugged in but as soon as I unplug it power is gone. Any ideas? Do you think the battery may have become disconnected? I don’t want to take it apart without having any idea
Mine charges, lights work, can connect bluetooth, everything is fine it just wont play music. Any ideas? It was left in the rain. I have taken it apart but cant find any issues.
I left my partybox in the rain by accident and now the bluetooth light its blinking but everything its working fine i dryed it as fast as i could got mostly the water out any suggestions?
hello brother, my party box 100 batteries died after 3 years and now only works on ac power. I need to change the batteries, from the video i got [lithium ion,4 sets in series,capacity 2500 mah(36watt/hr)] this much , the samsung cell info not clear ~8650 is this right. All I need to do is swap this with new ones and its done right. I there any thing else?
The battery is a 18650. You can use any with 2500mAh or more with at least 20 Amps of discharge rate. You should be careful with the wiring and the solder points. I definitely recommend using a spotwelder but a solder Iron works to.
My jbl partybox 100 always turning power on itself,sir what do you think is the problem?and also the bluetooth adapter card is damage,where can i buy one..i am from the Philippines
I think there's a short between the two power Pins. Let the board with the powerbutton away and try it again. I asked JBL itself and they gave me the contact to their supplier. I could order over mail. I had to replace the rubber part on top it cost 10 Euros and 15 with shipping.
I have a jbl partybox 100 just like the one in the video. I am in America and I have 110v ac at the power supply and ~22v DC on the pins on the power supply board. I have confirmed continuity at the power button, any advice? Any better write up on the "common issue" you fixed at the very end of the video with a jumper wire? Thanks in advance and you have a new sub cause of this great video. Thanks again.
Hello, what's the issue? Does it turn on? The connector of the main board is very fragile. In my case there's only the bottom soldered and the top is loose. I tried several attempts to solder the pin back but it seems that there's some demage inside the plug. Therefore I press the power button and try to find the right Pin with continuity mode. It was the 11th or 12th I am not sure anymore. Than I make this jumper wire and attach it to the same pin out in order to get the signal again to the main board.
I am testing power supply, What is the out put voltage of power supply is it Ac or DC?. Input side voltage test shows 220VAC, but output side shows zero volts. is that something wrong with it. Physical observations of components on circuit board is clean and firm and no burning sign. Please help if you happen to see my comments, thanks :)
That means your power supply is working no more.. I must show 22v dc output. You should diagnose and repair or just supply add laptop charger of matching voltage output or even standard 19.5v one should works fine..
@@technico5880 i opened it up and thought why not charge it 1st. I plugged it. I heard something and the last charging light started blinking. So l am going to let it charge for 5 hours then report back.
So I left my party box 100 outside last night and I got a little rain on it when I plug it in the the last battery life light comes on and so does the power button but it all turns off shortly after
@@bongskilandagan9844 yeah could be a reason. If you don't make a battery upgrade. And assemble everything as in the video there could be no reason why the charge speed decreases.
@@technico5880 no firstly it was continuously turning on and off So I open it up checked any ic or components are damaged or not Bot if i plug the battery pin titly then it again starts on and off or I plug the pin loosely then it's ok but not charging more the 2points
Oh no definitely not 😉 There is no sealing. A little bit of rain splashes of water are okay. But if you take the whole speaker into water it will definitely take damage.
@@user-sv4xk5im1g The lights got their signal over the plug next to the bluetoothmodule. I think the wine goes over the large loudspeaker. Maybe theres a short circuit. You can measure it from above and if it's a short circuit you can carefully try to follow the cable down to the loudspeaker. You can use some alcohol (no water inside) and remove the corrosion as you can see in the video. I've never seen these lights but I think they are large PCBs in ring shape.
why and from where to where did you connect that red/yellow wire in the last or at ending clip.
I know you posted this a while ago but can there be other issues with the speaker and if so how do you fix them
Gostaria de saber como adquirir uma placa principal da partybox 100 pois a que eu tenho não sai som
Hola amigo tengo un problema con mi jbl Party box 300 no sale sonido en sus tuiter que puedo hacer que pieza devo cambiar ?
Amigo que puedo hacer si mi bocina party box 100 le cayó agua por arriba y atrás , la sequé con rapideza pero a los pocos minutos dejo de escucharse solo seguía el juego de luces pero de sonido nada
great video. you have a new subscriber .
I have jbl partybox 100, it charge too slow like not charging, I change new lithium battery but it not work, blink only one light during charging, what is the problem, PLEASE reply me
Ayuda Mi party box300 lo usé maximo volumen hasta que se apagó luego lo conecte pero ya no carga no enciende alguna solución gracias
My jbl 300 got water damage and now the power button just stay orange but won’t turn on, any help please?
Live in Florida tipped on my mobility scooter got water in the bottom bass air intake twice just used air dryer
Hey, I can see one issue in this video, you fixed the speaker, but the lights got glitched as you can see at the end, is it possible to fix?
Yes of course it's the same flex cable. I had to ad another bypass cable. But to be honest I don't like the light and turn it of completely.
Hello my jvl. 300 only tweeters work. No big speakers
How many pins are on the flex cable connecting the power button and the main circuit board? I need to get a replacement. I luckily only had an issue with the power button board which was slightly corroded after an unlucky rain incident, I was able to fix it but unfortunately the speaker now turns on for no reason and I believe it is because one of the pins in the flex cable is slightly bent.
I used this cable: de.aliexpress.com/item/1005004064351607.html?spm=a2g0o.productlist.0.0.42504c09UaPv3X&algo_pvid=d47d43ba-b8d1-4530-baa0-7371c58ecb06&algo_exp_id=d47d43ba-b8d1-4530-baa0-7371c58ecb06-2&pdp_ext_f=%7B%22sku_id%22%3A%2212000027919489983%22%7D&pdp_npi=2%40dis%21EUR%21%211.52%21%21%211.75%21%21%400b0a0ac216571884976285993eeb03%2112000027919489983%21sea
18 Pins, 30cm. AWM 20624 60V
What is the pitch of flex cable?
My partybox 100 works when plugged in but as soon as I unplug it power is gone. Any ideas? Do you think the battery may have become disconnected? I don’t want to take it apart without having any idea
i had the same problem with a audio pro c5 i think its the battery that needs to be replaced
My partybox 1000 fan keeps running all the time even if the music is not playing! Should I be worried or is something normal?
Maybe a lot of dust inside
Why jbl partybox not turn on? While charging only on button works? Wat is the reason and wat to do for work?
Mi party box300 lo usé maximo volumen hasta que se apagó luego lo conecte pero ya no carga no enciende alguna solución
Mine charges, lights work, can connect bluetooth, everything is fine it just wont play music. Any ideas? It was left in the rain. I have taken it apart but cant find any issues.
Same here, you fix or recycle?
I left my partybox in the rain by accident and now the bluetooth light its blinking but everything its working fine i dryed it as fast as i could got mostly the water out any suggestions?
But you can connect with Bluetooth?
@@technico5880 yes
hello brother, my party box 100 batteries died after 3 years and now only works on ac power. I need to change the batteries, from the video i got [lithium ion,4 sets in series,capacity 2500 mah(36watt/hr)] this much , the samsung cell info not clear ~8650 is this right. All I need to do is swap this with new ones and its done right. I there any thing else?
The battery is a 18650. You can use any with 2500mAh or more with at least 20 Amps of discharge rate. You should be careful with the wiring and the solder points. I definitely recommend using a spotwelder but a solder Iron works to.
@@technico5880 yes ofcourse, i don't have the skills to do this, i have a friend whom i will do this. Thank you very much for the reply 🤝
My jbl partybox 100 always turning power on itself,sir what do you think is the problem?and also the bluetooth adapter card is damage,where can i buy one..i am from the Philippines
I think there's a short between the two power Pins. Let the board with the powerbutton away and try it again.
I asked JBL itself and they gave me the contact to their supplier. I could order over mail. I had to replace the rubber part on top it cost 10 Euros and 15 with shipping.
Do you have Facebook sir?how ca i contact you?..
My jbl got dropped and now the bass or audio is very fuzzy and distorted when high bass sounds play. Any ideas?
Any chance you figured this out dawg?
I have a jbl partybox 100 just like the one in the video. I am in America and I have 110v ac at the power supply and ~22v DC on the pins on the power supply board. I have confirmed continuity at the power button, any advice? Any better write up on the "common issue" you fixed at the very end of the video with a jumper wire? Thanks in advance and you have a new sub cause of this great video. Thanks again.
Hello, what's the issue? Does it turn on? The connector of the main board is very fragile. In my case there's only the bottom soldered and the top is loose. I tried several attempts to solder the pin back but it seems that there's some demage inside the plug. Therefore I press the power button and try to find the right Pin with continuity mode. It was the 11th or 12th I am not sure anymore. Than I make this jumper wire and attach it to the same pin out in order to get the signal again to the main board.
I am testing power supply, What is the out put voltage of power supply is it Ac or DC?. Input side voltage test shows 220VAC, but output side shows zero volts. is that something wrong with it. Physical observations of components on circuit board is clean and firm and no burning sign. Please help if you happen to see my comments, thanks :)
That means your power supply is working no more.. I must show 22v dc output. You should diagnose and repair or just supply add laptop charger of matching voltage output or even standard 19.5v one should works fine..
Necesito conseguir la placa de botón de encendido etc de la bocina JBL party box 100. Quien sabe donde la podría conseguir?😢
I wrote JBL and they gave me their direct supplier contacts, and I ordered there☺️
Man, it works with battery disconnected?, i don't want buy a new one. Thanks
Yes, it works
My boat filled up with water and now my partybox 300 is fed
What type of alcohol you use?
99% Isopropanol
I have a similar jbl 300 with water damage. Can u assist me do same to get it working pls.
I can try.
When are you available.....where are you??
@@phemmyo5146 you can write me here if you have questions or problems.
I will make a Instagram profile in the future👍 then you can contact me there
@@technico5880 i opened it up and thought why not charge it 1st. I plugged it. I heard something and the last charging light started blinking. So l am going to let it charge for 5 hours then report back.
Now working ...... only paid 100 for it. Unbelievable
My jbl party same water damage
So I left my party box 100 outside last night and I got a little rain on it when I plug it in the the last battery life light comes on and so does the power button but it all turns off shortly after
What happens if you charge the battery?
Que medidas tiene el cajón de madera
Battery so smool
why my jbl party box 100 is slow charging now?can someone help me..tnx
Maybe because you have a larger capacity now. How do you measure the charging speed?
@@technico5880 it took a couples of hours in every 1 chrge indicator led
@@technico5880 my battery is busted?
@@bongskilandagan9844 yeah could be a reason. If you don't make a battery upgrade. And assemble everything as in the video there could be no reason why the charge speed decreases.
@@technico5880 😔 where can i buy battery for jblpartybox100?do u have any suggestion?
My speaker turn on and off by itself until the battery is completely drained. What should I do ? Please reply
Did u find a solution?
Same issue here. we need to replace the replace the battery itself. That's the only solution. I am going to...
Can I send you my speaker and possibly fix it?? Jw
I don't think it's a good idea. The shipping cost are very high and I can't guarantee you a successful repair. I can try to help you here if you want.
My party box is not charging
Did it happen suddenly or were there any outside influences?
@@technico5880 no firstly it was continuously turning on and off
So I open it up checked any ic or components are damaged or not
Bot if i plug the battery pin titly then it again starts on and off or I plug the pin loosely then it's ok but not charging more the 2points
@@zunaidshaikh9123 okay, if I understand everything correctly two of the battery to mainboard wires have a loose contact, right?
@@technico5880 I think so
@@zunaidshaikh9123 check it with a multimeter if it's the plug or the wires.
my jbl partybox 100 when i turn it on it turn off immediately does anyone know the problem? thank you
Happened to me today
How does jbl make these big speakers with small shitty batteries 🤦🏽
cus jbl is overpriced crap for childs...
Yeah, I expected it to be 8 or 10 cell battery, but it's only 4 cell IMAO
Is this jbl waterproof?
Oh no definitely not 😉 There is no sealing. A little bit of rain splashes of water are okay. But if you take the whole speaker into water it will definitely take damage.
@@technico5880 Thank you. I accidentally spilled wine on it. Now the backlight does not work properly😭
@@user-sv4xk5im1g you mean the backlight of the buttons? Or the big light inside the speaker?
@@technico5880 large speaker lighting
@@user-sv4xk5im1g The lights got their signal over the plug next to the bluetoothmodule. I think the wine goes over the large loudspeaker. Maybe theres a short circuit. You can measure it from above and if it's a short circuit you can carefully try to follow the cable down to the loudspeaker. You can use some alcohol (no water inside) and remove the corrosion as you can see in the video. I've never seen these lights but I think they are large PCBs in ring shape.
Ia jbl partybox
It looks like water damage
Yes in fact. I already contacted the previous owner and he confirmed that it is a water damage.
MY JBL partybox100 turns on and shows light but doesn't play any sound anymore.Even when you power it up. Nothing. Ideas?
Same here