I'm getting a weird distorted signal and I can't seem to get any effects to work on the dry sound. Even turning the input down in the mix doesn't help, the buzz is always the same volume in relation to the track, it's not peaking either. May have a bum interface but it works with garage band and stuff.
Hi! I did all the same steps but my cubase LE AI9.5 is not recording anything from the UR22mkII. Any advise on what could be the problem? I can hear my guitar thru it via the monitoring and have set up the ASIO drivers as well.
im using the tascam us 1x2hr and every time i try to follow this. it doesnt show the tascam in these sections.. CUBASE came with this audio interface??? how do i do this??
Hello, I have a problem and I would like to ask you, I am working with cubase 10.5, in Windows 10, and I have noticed that within my project, I name each track, with the shift + enter key, so far so good, my problem is that when saving my project, as a backup, or also "saving as ...", I close cubase and I go to the folder where I saved the project, and the tracks appear in the 'audio' folder, but without a name, just They come out as "audio 01, audio 02 ...", how could I get them to save me with the names that I have already put into the project? If you can tell me what the problem is, thank you very much, A big hug.
You will also have no names attached to the audio of the track without saving and re-opening the project. You may want to edit or delete that observation from your comments, in order to omit that the audio portion of the track is unnamed due to saving and re-opening project cause and effect.
I had several issues with my Cubase AI. First, it does not recognize some 3rd party plugins, while Cakewalk recognizes them /they are 64 bits). I checked the path and it was right, but the plugin was not available. Ok, i passed over this period when I was fighting hard with an application to make it work. I uninstalled Cubase and go on with Cakewalk.
Are you recording your guitar in stereo o mono?, because i don't know, but in my case when i record my guitar , is in mono . How can i record in stereo with a interf ace?. Great video ;)
Guitar should always record in a mono, as you are using a mono input. You can then use plugins or guitar simulators that can turn your track for stereo effects.
@@soutrik27 the monitor on selection is located in the VST window, which is located by selecting Studio pull down menu, which is located on the main menu bar. Then selecting the bottom Option, I forget its labeled name. This will bring up the VST information, then select the bottom option, again i forgot the label name, this will bring up the VST window where the monitor on/off can be selectef
I’m having the same problem idk how to fix it. I’ve been trying for an hour now and no luck. If you’ve figured it out or if anyone else has can you help me out if u can? Thanks!
Listen to me here. I buy your company recording bundle for 300 dollar. Please give us some more tutorial on how to record. This is only for Apple user. i am windows 10 user.
hey pal cool down on the slick presentation and think more on the actual teaching of this product. your are constantling showing a result without taking any time as to how you got there. Thats BAD teaching. Slow down and explain. Us people are not here because we know the Programme, we are here to learn it, so please stop your bad teaching practices of assuming we do
For anyone that already knows this software, this probably looks awesome but every time he's like, "hit record" and it just magically records is leaving out all the fresh newbies from knowing what's going on lol
@Little Kobold since my last comment I learned something that wasn't taught in this video. I had to go into VST connections and choose the right output channels since by default it wasn't directing to the interface monitor.
This might be the worst beginner tutorial I’ve ever seen. I was lost at the first step. My Cubase doesn’t look anything like yours, an even if it did why didn’t you zoom in on the pull down menus? They’re microscopic!
Agreed, but this video is just one example of how bad DAW recording process is for a newbie like me. The hardware/software are poorly designed, poorly documented and the absolute antithesis of plug and play. I should be able to plug my guitar into an audio interface and record a track.
Love you! Thanks!
Thank You for this video! Great tutorial!
I'm getting a weird distorted signal and I can't seem to get any effects to work on the dry sound. Even turning the input down in the mix doesn't help, the buzz is always the same volume in relation to the track, it's not peaking either. May have a bum interface but it works with garage band and stuff.
Hi! I did all the same steps but my cubase LE AI9.5 is not recording anything from the UR22mkII. Any advise on what could be the problem? I can hear my guitar thru it via the monitoring and have set up the ASIO drivers as well.
im using the tascam us 1x2hr and every time i try to follow this. it doesnt show the tascam in these sections.. CUBASE came with this audio interface??? how do i do this??
how do I play neural dsp in here?
akk this is basically the same for AI LE 12 ?
Which socket is the output of the steinberg UR22 MKii plugged in to on the pc sound card? Mic in or Line in. ?
None. Its the two om the back
If I copy the same effect to multiple tracks, does it raise the CPU usage?
Yap,the more instances of an effect,the more cpu usage,use aux tracks for that,multiple tracks going to one particular effect only.
You made a video about recording a guitar but without actually recording a guitar
Hello, I have a problem and I would like to ask you, I am working with cubase 10.5, in Windows 10, and I have noticed that within my project, I name each track, with the shift + enter key, so far so good, my problem is that when saving my project, as a backup, or also "saving as ...", I close cubase and I go to the folder where I saved the project, and the tracks appear in the 'audio' folder, but without a name, just They come out as "audio 01, audio 02 ...", how could I get them to save me with the names that I have already put into the project? If you can tell me what the problem is, thank you very much, A big hug.
You will also have no names attached to the audio of the track without saving and re-opening the project. You may want to edit or delete that observation from your comments, in order to omit that the audio portion of the track is unnamed due to saving and re-opening project cause and effect.
For some reason I’m getting a feed signal when I get my track ready
I don´t see the VST audio system option under "devices"...Help
I had several issues with my Cubase AI. First, it does not recognize some 3rd party plugins, while Cakewalk recognizes them /they are 64 bits). I checked the path and it was right, but the plugin was not available. Ok, i passed over this period when I was fighting hard with an application to make it work. I uninstalled Cubase and go on with Cakewalk.
Did you select 64 bit in the setup of the VST? The default is 32 bits which has nothing to do with the sample rate, but of the operating system.
i still dont know how to record my guitar on my ur 22c
Are you recording your guitar in stereo o mono?, because i don't know, but in my case when i record my guitar , is in mono . How can i record in stereo with a interf ace?. Great video ;)
Guitar should always record in a mono, as you are using a mono input.
You can then use plugins or guitar simulators that can turn your track for stereo effects.
@@Filete ohh Thank you.
I dont hear monitoring through my headphones but its picking up the sound, no matter what i do
I am having similar problem. I cannot find record monitoring button
The headphone connection?
Which device are the headphones connected to?
The URC or the computer ?
@@soutrik27 the monitor on selection is located in the VST window, which is located by selecting Studio pull down menu, which is located on the main menu bar. Then selecting the bottom
Option, I forget its labeled name. This will bring up the VST information, then select the bottom option, again i forgot the label name, this will bring up the VST window where the monitor on/off can be selectef
I’m having the same problem idk how to fix it. I’ve been trying for an hour now and no luck. If you’ve figured it out or if anyone else has can you help me out if u can? Thanks!
I'm using AI and I can't find device set up anywhere
Listen to me here. I buy your company recording bundle for 300 dollar. Please give us some more tutorial on how to record. This is only for Apple user. i am windows 10 user.
hey pal cool down on the slick presentation and think more on the actual teaching of this product. your are constantling showing a result without taking any time as to how you got there. Thats BAD teaching. Slow down and explain. Us people are not here because we know the Programme, we are here to learn it, so please stop your bad teaching practices of assuming we do
spot on
For anyone that already knows this software, this probably looks awesome but every time he's like, "hit record" and it just magically records is leaving out all the fresh newbies from knowing what's going on lol
Doesn't work for me. Why? I can't hear anything
@Little Kobold since my last comment I learned something that wasn't taught in this video. I had to go into VST connections and choose the right output channels since by default it wasn't directing to the interface monitor.
4:40 duplicate track; 5:30 amp simulator
I have a terrible experience with Qbase and their customer service. Will never use their products.
Useless i cant see a thing
still not solved my problem, this is way tooooo basic , poor quality video
I do not want to see the lady's nails. In a decent (official) video, I would like to see the window's setup parameter clearly.
this is the worst program ever invented.
This video didn't explain anything. It's just as bad as this DAW
This might be the worst beginner tutorial I’ve ever seen. I was lost at the first step. My Cubase doesn’t look anything like yours, an even if it did why didn’t you zoom in on the pull down menus? They’re microscopic!
Agreed, but this video is just one example of how bad DAW recording process is for a newbie like me. The hardware/software are poorly designed, poorly documented and the absolute antithesis of plug and play. I should be able to plug my guitar into an audio interface and record a track.