How to Fix Whirlpool Washer OFF Balance/Banging on Sides | Model WTW4903XW3 | Amana, Maytag, Kenmore
Vložit
- čas přidán 5. 08. 2019
- In This Video, We have a Whirlpool Top Load Washer, Model WTW4903XW3, In Which it would bang on the Sides and Have a "Dance" During All Cycles, But especially During the Spin Cycle. After Diagnostics, We Found that the Suspension Shocks Needed to Be Replaced. Watch the Video To Find Out How to Replace the Shocks on a Whirlpool, Or Whirlpool Brand Washer.
Please Like this Video, Share and Subscribe for Future DIY Videos. Support Our Channel by Using the Affiliate Links Below. (By Using them, We do Earn a Small Commission at NO Extra Expense to You) If You Can, You may Also Leave a Tip Below. Thanks For Watching and for the Support.
Here is Where to Find Suspension Shocks:
Amazon: (OEM) amzn.to/3HQ5uso / (Aftermarket) amzn.to/3ui8rKX
eBay: (OEM) ebay.us/Fcm5I9 / (Aftermarket) ebay.us/WnpmOM
RepairClinic: bit.ly/490PPCx
Washer Still Banging and/or Shaving, Cracking Top of Tub? Watch this Video: • Whirlpool Washer Still...
Sign up For a FREE 30-Day Trial of Amazon Prime and Get Your Appliance Going Faster! CLICK HERE: amzn.to/3BA7Erj
If this Video Helped you in any way, Consider Leaving a Tip:
- Buy Me a Coffee: buymeacoffee.com/diyrepairsnow
- PayPay: @diyrepairsnow
- Venmo: @diyrepairsnow
Warning: Please Be sure to Unplug Any Appliance Before Starting any Repairs! This video is to help DIY's do the repairs themselves, at their own risk.
**For Parts, We Reccommend RepairClinic - They Offer 365 Return Policy. Visit HERE: www.dpbolvw.net/click-8532962-...
My Filming Equipment: www.tkqlhce.com/click-8532962-...
Canon M50: amzn.to/2WUHlY5
Rode VideoMicro Compact Mic: amzn.to/2TqKTzo
Canon M50 Mount Adapter: amzn.to/2MZv84t
Joby GorillaPod 3K: amzn.to/2Fn3jgd
GoPro Hero 7 Silver: amzn.to/2UNHImN
GoPro Hero 7 Black: amzn.to/2TnPXVd
GoPro Accessories Kit: amzn.to/2OnilpG
Thanks for Watching and be Sure to Subscribe for more HowTO/Repair Videos!
- DIY Repairs Now - Jak na to + styl
Thanks for the video. Didn't realize how easy this was. Made life in my household much better after this got fixed.
Thanks so much for this video. My husband and I replaced our rods with no problems. It was quick and easy, and now the spin cycle is smooth and quiet.
Excellent video- you are a very talented individual. How you were able to do the repair in such a confined space is beyond me. Nice job.
I want to thank you for this very helpful video you shared. I was able to repair my mom's washer following the instructions given on this video. God bless you for it.
Very informative, and very easy to follow his directions. Thank you for repeating the importance of safety.
You’re welcome thanks for watching my video I’m glad I can help 💯💯👍🏻👍🏻
Your video helped more than anyone else I saw thanks.
Made it look easy ! Great Job
Followed your instructions and saved myself $600 (after buying the repair kit). My wife had already picked the new washer she wanted. Thank you, thank you, thank you.
Thanks for showing how to repair the shocks its working great again and I saved alot of money the total cost was 21.00 suggestion for women for the last two get shocks I used a two by 4 to hold the tub even I couldn't do both it was to heavy for me .I had my son and boyfriend tip it for back and forth for me .Thanks again
Great video. As it turns out, one of my shocks had simply come out of the top lock and I just needed to hook it back in place. Your video was extremely helpful nonetheless. Thanks.
You’re welcome thanks for watching my video
Gracias carnal, fixed my problem, great video thanks, God bless.
Very detailed directions thank you!!
Great video...,that banging is my problem, so this looks like the cure&thank God it looks like an easier DIY job:)
This is was super helpful. I just ordered a new suspension kit. Thank you!
Hey Guys, I Have A Question :
Are All Suspension Kits Universally Made for All Whirlpool Washer Models OR Are There Different Suspensions Kits for Different Whirlpool Models...??
🙏Thanking You All In Advance for Your Help With My Issue.
I ordered the OEM suspension kit, installed as shown, runs nice and quiet now, $80 instead of a $600 new washer! 2:22
Thanks because install new shoots and it still shakes But your right I installed it wrong. It’s working now thanks again
Helpful video,thanks sir.
thank you so much for this video . this help a lot .
Thank you 💕💕
Worked great. Many thanks!
You’re welcome thanks for watching my video👍🏻👍🏻💯💯
Great job thanks
WONDERFUL....YOU DID SUCH A GOOD JOB AND WISH YOU WERE NEAR BY WHERE I LIVE. 😀😊 i HAVE BEEN STICKING POOL NOODLES UP IN THE BOTTOM BUT THAT DOESN'T WORK...BUT i TRIED...THE MACHINE SOUNDS LIKE IT IS POSSESSED,. WHEN I BOUGHT THE HOUSE IT CAME WITH THE HOUSE...A REALLY NICE MACHINE BUT NEEDS THOSE SHOCKS REALLLLLLY BADLY. THANKS FOR SHOWING ME HOW. GRANDMA BETTY.
Awesome job, thanks!.
You’re welcome thanks for watching my video
I think u jus saved my mother & sister mega bucks!?!?! Watched your video & I believe it’s the same problem with her whirlpool!!!
My neice has been known to overload the washer!?
This is either a new (top loader!?) washer or overloading issue!?!?!?! The old standard washers weren’t known for this problem!?
An obvious change in certain design has brought about this typical problem!
My ex Roper washing machine & my sisters prior(same brand!)…. has had the same exact problem!
It pays to watch a video before u start buying stuff over & over when there’s a simple remedy/repair!!👍🏽👌🙌🏽🙏🏽👋🏼
Gracias!❤👫😁🐕🐕
Thanks
I’m gonna try this weekend to do this to my Kenmore.
I only got space to tilt backwards
instaBlaster...
This is good because most vids say to put the washer on it's back which is hard on my back.
You’re welcome thanks for watching my video i’m glad I can help👍🏻👍🏻💯💯
I put a load in over an hour ago! Still not finished! One hour and thirty minutes. Medium gentle cycle. Brand new machine. TF!!!!
Hoping this video helps me. Mine does it every single spin cycle.
Appreciate you
This has save me a couple hundred $$$...quic question...when medium to heavy load is doesn't bang anymore..but let's says when 1 towel is only washing it bangs like crazy...waht could it be? Already replaced the springs...medium to heavy loads fine but super small goes back yo banging
Thank you.
I will try this with the one I have an issue…
Is there any video that show how to put back together the top cover to the rest of housing? Because it came apart and not sure if it’s done with screws or what…
Thank you again!
(Also: what type of camera are you using to record? I saw it was sending image to your phone 🙏🏼)
I had the same problem on our whirlpool washer. I ordered the suspension kit and installed it, today. It was a bitch. I only have two hands and you need three to install the new suspension into the sockets. One, to lift up the tub, one to lift up the suspension rod and one to insert it in the socket. It took me about four hours but I got them all in without any drips, runs or errors ( cuts on my arms). I think it was caused by a bent suspension rod, but there were no centering springs on the suspension rods and I do not think it ever had any, because they were not hanging inside the machine or on the floor under it.
I had to tear apart my 25+ year old Amana dryer a few months ago to replace several parts that had worn out. This washer repair looks far easier than that job. My new washer is making the same bumping sounds and I’m sure I will be needing to replace these support arms on it before long.
We followed the instructions as per the video but it seems to be an electronic wash cycle issue, as when I apply the Drain & Spin, it does so without a balance problem.
BRO YOU THE MAN! You saved me so much time/effort by the tilting method instead of outright unhooking, putting the washer on the back and trying to do all 4 at once.
Could I send you like $5-10? Paypal/venmo? YOU THE MAN!
Glad Mu Video Helped, Thanks! 👍👍 If you would like, my PayPal link is paypal.me/diyrepairsnow?locale.x=en_US
Are there springs at the bottom to help stabilize?
Great video. But how do you determine the rods are the culprit ? I've watched other videos and the problem was either a slipped plate underneath the tub, or broken rubber straps. So much to learn.
You'll know because if your washer uses this system, and it's failing... it will sound like your washer is the fucking Kool-Aid Man trying to escape your laundry room.
I had a hard time getting my hand in there with vice grips so after the first one I ran and old one down from the top and hooked the new one and pulled it through. Only took a few minutes but it still shakes so really just wasted money.
Thanks for the video... Luckily I only had shock that came loose... Didn't need to buy new ones
California_Gaming You're welcome thanks for washing my video👍🏻👍🏻
Thanks. Buen trabajo
I changed my shocks and now it seems like it bangs harder. Any suggestions? WTW 5000
But it was pretty funny that you kept recommending to do it this way, but you always did it that way instead, lol. But a VERY helpful video, thank you!
Use a file or even your vice grips or anything metal to run across those sharp edges of the metal and check them again, they should be smooth and won't cut you. I got sliced open pretty good putting a cord on a stove and then I used my ratchet to run across the sharp edges and I was able to do it without getting cut.
did it fix the prob?
My shocks are good, no stability springs but still bangs the sides, any other suggestions?
I replaced the suspension rods and it seemed to fix it for a very short while. Now I suspect that the snubber ring MAY need to be replaced but that's a more involved process.. Oh well, thanks for this anyways.
..Snubber Ring? May be the issue I have. Tell me more. Pls
I got a Kenmore 25132 500 series washer and for some reason it spins out of control after we repaired the dampner rods on it. What can fix that issue?
Thank you for sharing this video and your expertise. My washing machine sounds like it is off balance often, but now it really sounds like it is falling apart. Is there anything else that can cause off-balance washing or a terrible breaking sound (very loud knocking or grating)?
When the washer machine is off balance the most common thing is the shocks You also got to make sure the four legs are adjusted and the cabinet is not touching the floor the third thing it could be the shaft which is part of the drum but that’s not common
@@DIYRepairsNow I need help with my washer please email me. I have recalibrated and done suspension rods
I think that's the same problem my washer has because it be banging side to side when I wash and water doesn't fully rinse
Check first to see if there's any water sloshing at the top if you don't hear the water at the top and it's going to be unbalanced whether or not you replace the suspension. the top isn't balanced it's going to shake whether even if there isn't clothes in there. Our company has been running into this a lot. Anything from 2017 til now replacing the suspension rod doesn't fix the issue.
GREAT VIDEO I LIKED IT!!!!!!!! where can i find a discounted spring rod kit?///onnline...thanks
Why did they stop making washers that lasted for 15 years....
they lasted 30 years
Like cars and phones, they make more money if the item falls apart around the time you make the last payment.
You can still find a used one but for $300 minimum😢 those are the ones ive been looking for
Thanks for the video. I did as you recommended and replaced the shocks(same model as in the video). It doesn't do it as often, but still will shake violently during the rinse cycle. Any ideas? Thanks in advance.
Same here.
@@giancarlotiffer5809 did you use factory parts? I didn't twice. The third set were factory parts. Been working great now for several months. The aftermarket parts are pure crap.
Great video. I have a whirlpool model number wtw4810ew1 and I used this video to fix install my new suspension kit. Everything went well in terms of installation however my machine is still banging. I know that it could be the legs but I've adjusted them or at least I believe I did. Is there anything else that could possibly be the problem?
Yes. The balance ring. It's that plastic ring that sits on the inner tub.
I have a whirlpool LS18244000 washer and it's goes off balance and shakes hard and when I moved my washer there was a bolt that hadcome out and I need to figure where it goes. Can you please HELP ME????
If it's off track does that 100% mean that the shocks are broken or is it possible that the same ones could be used..
How can I tell if it’s the shocks that’s bad?
I just change mine,But after a week shaking again
Great video and easy to follow. Unfortunately after replacing the rods mine still sounds like it might break through the wall. Any suggestion?
For mine. The cap on the hook wasn’t aligned with the rod. Then it’s worked!
@@drosas85 what do you mean Cap?
Never mind. Still shakes. Wasted half a day and $40
@@drosas85 lol, saving for my next washer, probably a front load.
@@whodatyamid5399 and definitely not a whirlpool
Th so much for this video! We changed the suspension rods, washer worked great for a week and now it’s doing the same thing.
Is it that the quality of the parts is awful or do we have another problem causing the suspension rods to wear out quickly?
You need to check if you install them correctly next push the tub down to see if it bounce if it bounce more than once you need to return those shocks because they are bad and install a new ones if it only bounce ones, that means the shocks are fine Make sure you adjust all 4 legs and make sure the cabinet is not touching the floor and next I’m gonna send you a link to check out but it’s not touching the cabinet and create it an issue end up in browsing
czcams.com/users/shorts1Op5JCMjRvM?feature=share
@@DIYRepairsNow Thanks so much! I will check this out
I found out, today, that when Whirlpool collocates the motor under the tub they no longer needed the tub centering springs and removed them. I have the WTF 0048 model and it does not have them. The correct suspension rod repair kit for this model is T 1780048.
My husband replaced our suspension rods two days ago. It’s a Whirlpool, but I don’t know which model. I saw the old rods and springs that he took off. So yours should have springs. If not, you need to get them.
That model # is hillarious! (WTF 0048)...
Can I get one like that to buy
Great videos. Mine still bangings after changing them. They don't seem to be installed wrong. I even checked the locking clips they look to be installed correctly. Is there anything else that can be causing it to keep banging? Thank you.
Make sure all four legs are adjusted and level for most likely it needs to be re-calibrate
czcams.com/video/kgfX9HVg3EQ/video.html
@DIYRepairsNow I did adjust the legs. I put a level on it, and it is level. Thank you. I appreciate your help. I'll watch the recalibration video. You have a ton of great videos.
@DIYRepairsNow I did the recalibration, and that seemed to help, but it still go out of balance. I pushed on the tub, and it bounced almost as bad as it did before I replaced the shocks. What do you think is causing the out of balance? Shocks again?
I have a non agitator whirlpool washer top load, recently, makes very loud popping noises and very loud, what could be wrong
Easy fix need and new replace new 4 dogs and works in 10 min done
Question. Changed the suspensions , but it’s still shaking. Level legs are good too. Could it be another issue that I can try to fix?
czcams.com/users/shortspTnLllOoB0U?feature=share
@@DIYRepairsNow thank you
Hey brother! After buying and replacing the suspension kit my washer is still doing the same exact thing... what else should i look at? The foam pieces on the sides are worn down and the drum hits the walls but I don’t see that causing the crazy off balance shaking. Any other ideas? Please help and great video 👍
I believe that it is the drum support bearing. I did the suspension and tie wrapped foam around the tub. It still bangs. Going to live with it for now.
Same here.
I know this us diy but what would be a fair price if paying someone to do this?
I changed the shocks and the washer is still not balanced when spinning...What else could cause this?
I ran into an issue a couple days ago and for some reason the brand new shocks looks like they are a little shorter than the old ones Saw the bleach trade was hitting the piece of metal on the cabinet so I have to bend the piece of metal up to a stop it from doing that try that
Whirlpool washer after washing and spinning when it to rince it start making a streaking sound open before it is finish what is wrong
Jannett Haughton sounds like the belt
Replaced the shocks, ensured machine level, still bangs on spin . Any suggestions??
Make sure the 4 legs are raise up make sure the cabinet is not touching The floor The next thing if that doesn’t work will be replaced the top ring here is a link
czcams.com/video/z__LeCVprVs/video.html
My part is tub ring W10849477 just plastic with no fluid. I inspected it for cracks and saw nothing. What can be bad with this besides it having cracks or broken pieces.
@@jimgassler7976 Send me the model number of the washer
@@DIYRepairsNow whirlpool model wtw5000dw1
so my whirlpool washer during the spin cycles shakes and hits the side walls. The shocks dont look like there is any type of break or anything on it is there supposed to be springs on the sides of the drum on this video I dont see any springs but other ones I do see em. ANY input on this would be appreciated I'm trying to fix it myself rather than spending another 3-400 on a washer... its about 3 years old the washer
The springs are going to look like new but they get weak that’s why they are not working correctly and if your washer doesn’t have the little springs on the side that means the model doesn’t need them
@@DIYRepairsNow Another maybe dumb question is I replaced the shox and it still shakes like crazy... is it possible that I didn't get the right shox? The springs did look smaller on the new ones but i replaced them and it still was aggressive during the spin
Click this link in second 30 it shows you how to push down the drum if the drum Bounce more than ones that means the shocks are bad the drum only supposed to bounce ones
czcams.com/video/HvTqvm_WNHQ/video.html
@@DIYRepairsNow Ill have to look when I get home but mine doesnt have the agitator in the middle. My washer is a whirlpool WTW5000DW1 and i replaced the shox with W10780045 which doesnt look like its compatible with my model
New washing machine are pure junk. 2 years doned.
Try 7 mnths🤦🏾♀️
I think mine made it to 3 yrs, repaired 3 times , garbage time.
We replaced its all thanks to your video but it did not fix it. While spinning it hits the side violently and shakes don't know what else needs to be fixed
Did you ever figure it out I changed my rods as well but it’s still shakes violently
Where would I find these parts?
Mark Bischoff it’s a link on the description of this video
I all of that but it still bang when spinning
Wat brand is thi?
Whirlpool
Go Gators 🐊
Gloves
Go Gators!!
Hey Guys, I Have A Question :
Are All Suspension Kits Universally Made for All Whirlpool Washer Models OR Are There Different Suspensions Kits for Different Whirlpool Models...??
🙏Thanking You All In Advance for Your Help With My Issue.
They're different and sometimes improved/revised parts replace the part that your machine came with.
🙏🏾🗣️Thanks, Much Appreciated...!!
The loose part just use zip tie for plastic
My washing machine is Insane, whenever I wash something it almost destroys my house what do I do? Pray to it? Throw Holy water to it?? 😭😭😭
Why doesn't anyone show what the problem is before showing the fix?
Whirlpool should fire someone for this design. They will give them a pay-off for all the money in parts and repair they made them after the guarantee ran out.
It's not so much it's off balance it's when the clothes are off balance or heavy like a fleece blanket it bangs the sides and doesn't dry my clothes and stays on rinse cycle for like 2 hours. It's really really annoying I don't care if it walks across the floor I just want it to dry my g dang clothes. There has to be some sort of sensor to tell it to not to spin when off balance.