All I know , you're the best in reviewing in detail all the Toro mowers and so so much entertainment !! Thank you for all the laughs !!!! You are good but so funny !!! Thank you for all your videos. For sure I will buy a Toro now.
Thank you very much Ted. We appreciate feedbacks like these from the viewers of this channel. We're glad you like the content and we will continue to make more for you.
8 years ago I started my business with a Toro Recycler push mower. A couple years in the front of the mower was cut off to make it into a mini brush hog. To this day after many hogging jobs with it it still works. Nice job toro. Very well built push mower back in 2015-2016 era roughly
I started with a 21 toro walk behind until the transmission blew out...then went to time master and now currently using a 36 Grandstand Tor and love the power and how it cuts so clean.
That's awesome. Thank you for sharing. We did a video comparing the savings over time on a Timecutter vs a Grandstand. Here's the link if you wish to check it out: czcams.com/video/aQ83cuZxpSQ/video.html
I love Toro equipment. My first experience was in 2001 after my 10 year old Lawnboy poop out. It was going to cost $265 to fix. So I looked at what new mowers the Hardware store had for sale. Bought the personal pace 21” recycler with the mulching kit. I still have it 22 years later. The last 12 years as a trim mower were my Timecutter 3200ss get get to. I have had it since 2011 mainly it fit the my back yard gate on my 1/3 acre lot. Still going strong 12 years later. I have to admit that it only has 220 hours on it. Get my mowing time from 2 hours with the walk behind to 1 hour with the zero turn Timecutter mower. Now my old Personal Pace mower seen better days. Thinking about getting the 69 volt lawn mower. Mainly because I have the 60 volt single stage snowblower and can use the same battery so all I need is the tool only mower. Did I mention that I had 3 Toro snowblowers. A Toro 724 two stage bought in 1995, I guess that was my first Toro. A 826 two stage bought in 2013 I have heath problems so can’t to snow removal any more. I a guy to it but his two snow blowers died on him and he borrowed my 826, to finish his customers drives. He liked it and I sold it to him in in January if 2022 and he is still using it. Bought the 69 volt snowblower for my wife to do snow that is 3” or less. I call my guy if it is more. Great products Toro has produced.
Price wise, the 34 timecutter zero turn is definitely the best. Grandstand is the complete package, proline only if you have hills otherwise not worth it.
I just bought a 34" timecutter i will get it in 2 days here in tulsa ok , I can't wait to get my hands on it and mow my lawn, plz do make a video of the timecutter 34" but in slopes and hills to see how far can be push to thest.
Awesome purchase Eleazar. Hope you enjoy your Timecutter. We can assure you that a complete analysis video for the Timecutter is in our pipeline and we will start working on it soon. Till then enjoy more content on our channel that you might find interesting.
Great video. I’m thinking about the commercial 21 or the 30 I have a time cutter 42 I just bought this year but my super recycler black edition needs to be replaced stat!
ok so i just bought a brand new 42 inch timecutter from tractor supply and runs good but when i pull the dipstick if its running oil shoots out and it seems excessive too me lots of blow by going on it has less than an hour on it? do i call kohler or what ? it has the kohler 7000 22hp 2023 year model please help
toro is a great mower but i think wright sells more in the stander department. I have been to dozens of dealers in the upper east coast and its rare to find a dealer that doesnt carry wright standers, t takes a minute to find a commercial toro dealer though. from what most of the dealers tell me they sell more wright stander i, b, and x models than most other similar commercial mowers.
It’s not a matter of which engine is best, for the remainder of 2021 and 2022, it’s a matter of which engine is available. Briggs and Stratton will pretty much be the only option available from all mower manufacturers except Honda. Honda stopped providing GC engines to all other manufacturers. You may run into a model or two with the Kohler XT675 engine but this is not Kohler’s proudest achievement, given the two options a Briggs is your best bet.
@@mainstreetmower thats interesting because I prebought a toro with a Honda engine online from a popular tool company. I guess they didn’t know what you do before they listed it. “Shipped in January” is what there site said.
@@mainstreetmower Thanks for the reply. We did really well on the treasure coast. I think if you did a Timecutter vs Husqvarna Z242F would get some good views.
@@mainstreetmower after watching a ton of your content, and others, I pulled the trigger on a Toro 75746. I really appreciate the content you put out, it helped me in my decision process immensely. It was available from a big box for a little cheaper, but I chose to support the local guy (Jordan Power Equipment) in Vero Beach. Again, thank you so much.
Hey Kevin, sorry about that. As a fairly small channel, we have to rely on youtube ads to continue making videos. However, since we're not fans of ads either, I have requested to reduce the amount of ads CZcams shows on this video.
The 30 inch toros aren't as reliable as you say they are. Our company bought a bunch of 30 inch toros with the Kawasaki motor and they all had problems related to random bolts unscrewing, to mower decks cracking, and engines breaking. Extremely unreliable buy a second mower as a backup, you'll need it!
It’s not odd. When you are a business owner, you get it. You sometimes have to not just look at what the mower costs to buy, but it’ll cost you over the spread of loan(if you get one). Because $8000 can seem daunting but when you spread it out over 36/48 month 0% loan, it’s not bad at all.
@@michaellarrick8881 have you ever complained or made a comment to someone else about the price of gas/food/housing? .... yeah don't worry about the actual price, just pay xxx.99 a month.
No everything but the Recycler is made in Minnesota. Toro is an American company founded in 1914. In their early years Toro build farm tractors and later built tanks for the US army during the World Wars. Today The Toro Company is the largest mower manufacturer in the world worth over $10b. Toro has a portfolio that includes eXmark, Irritrol, Ditch Witch, Z-spray, Left Hand Robotics….and is the market leader in both innovation and sales across most of their product families. The recycler push mower is made in a Toro owned and operated factory in Juarez, Mexico.
@@mainstreetmower I was looking at a mower in a local store as I used to use Toro in the 90’s when I was a green keeper to do the greens they were very good when they worked but if they went wrong it was always expensive no matter what. The one in the local store was around 21 inch ideal for our back garden area but when I read made in China and a Mcallister what’s next to it was identical but for the colour and about 25% cheaper so I left it I ended up getting a Stihl RM 253 T. What was in the sale at another garden centre for just £200 it’s a really great machine first fill and oil put in and it started on the very first pull so very happy and cuts great. If the Toro was made in USA I would have bought it but passed and ended up with a great mower half the retail price.
All I know , you're the best in reviewing in detail all the Toro mowers and so so much entertainment !! Thank you for all the laughs !!!! You are good but so funny !!!
Thank you for all your videos. For sure I will buy a Toro now.
Thank you very much Ted. We appreciate feedbacks like these from the viewers of this channel. We're glad you like the content and we will continue to make more for you.
8 years ago I started my business with a Toro Recycler push mower. A couple years in the front of the mower was cut off to make it into a mini brush hog. To this day after many hogging jobs with it it still works. Nice job toro. Very well built push mower back in 2015-2016 era roughly
That's awesome. Thank you for sharing.
You guys are amazing!! Giving that young dude a mower so he can mow poor folks yards for free. Good job guys.
Thank you Jef, it was our pleasure.
That flying green mower clip hand me laughing so hard I was crying. Nobody around me could understand why I thought it was so funny.
hahaha we are glad Marcus.
Timemaster is the best value for sure, helps if you know how to work on them for maintenance.
100%
I started with a 21 toro walk behind until the transmission blew out...then went to time master and now currently using a 36 Grandstand Tor and love the power and how it cuts so clean.
That's awesome. Thank you for sharing. We did a video comparing the savings over time on a Timecutter vs a Grandstand. Here's the link if you wish to check it out: czcams.com/video/aQ83cuZxpSQ/video.html
Great job showing and telling, keep up the good work showing have a great day see ya bye.
Thank you, hope it was helpful.
That is a perfect and accurate description. The back yard line of Toro!!!! Perfect brochacho
Thank you!
I work in landscaping and we two toro 22 inch push mowers they cut good they cut good.
Awesome.
I love Toro equipment. My first experience was in 2001 after my 10 year old Lawnboy poop out. It was going to cost $265 to fix. So I looked at what new mowers the Hardware store had for sale. Bought the personal pace 21” recycler with the mulching kit. I still have it 22 years later. The last 12 years as a trim mower were my Timecutter 3200ss get get to. I have had it since 2011 mainly it fit the my back yard gate on my 1/3 acre lot. Still going strong 12 years later. I have to admit that it only has 220 hours on it. Get my mowing time from 2 hours with the walk behind to 1 hour with the zero turn Timecutter mower.
Now my old Personal Pace mower seen better days. Thinking about getting the 69 volt lawn mower. Mainly because I have the 60 volt single stage snowblower and can use the same battery so all I need is the tool only mower. Did I mention that I had 3 Toro snowblowers. A Toro 724 two stage bought in 1995, I guess that was my first Toro. A 826 two stage bought in 2013 I have heath problems so can’t to snow removal any more. I a guy to it but his two snow blowers died on him and he borrowed my 826, to finish his customers drives. He liked it and I sold it to him in in January if 2022 and he is still using it.
Bought the 69 volt snowblower for my wife to do snow that is 3” or less. I call my guy if it is more.
Great products Toro has produced.
Thanks for all the experiences and comments Rickie!
Thank God for you brother you are very knowledgeable about Toro
Every thing you said in this true. Thank you.
You are very welcome Leroy. Thank you for the kind words.
The timecutter 34 does not fit into 36 inch gates. The mower is about 40 inches wide
I love the Keanu is the toro spokesman lol
haha we're glad Chad
What is the total width of the 34inch sit down z?
Price wise, the 34 timecutter zero turn is definitely the best. Grandstand is the complete package, proline only if you have hills otherwise not worth it.
Love the Grandstand.
Can't wait on a video on the 34 in.
Stay tuned. Thats the next video in our pipeline.
Awesome video they look beautiful.
Thank you Cristobal.
That small of a zero turn will leave ruts. You can't convince me it doesn't. I run a 36 turf tracer, 54" proline hdx and I do keep a 21 on my trailer
That's an awesome lineup you got there. Thank you for sharing.
I just bought a 34" timecutter i will get it in 2 days here in tulsa ok , I can't wait to get my hands on it and mow my lawn, plz do make a video of the timecutter 34" but in slopes and hills to see how far can be push to thest.
Awesome purchase Eleazar. Hope you enjoy your Timecutter. We can assure you that a complete analysis video for the Timecutter is in our pipeline and we will start working on it soon. Till then enjoy more content on our channel that you might find interesting.
Man those prices are dreamy nowadays 😢
Haha for real.
What’s the difference between the black zero turn and the red zero turn
I can’t decide between the 34inch timecutter or the grandstand or a walk behind
So basically all the options? haha
@@mainstreetmower yeah I think I’m going to go with the grandstand though unless I can get a walk behind for a good discount
All the best 🙂
You can use the smaller grandstand as a walk behind if you need to be easy on the grass, then stand on for when you want
Good video brother!
Thanks for watching Darwin.
Great video. I’m thinking about the commercial 21 or the 30 I have a time cutter 42 I just bought this year but my super recycler black edition needs to be replaced stat!
After some consideration I in fact purchased my first Toro and I’m super duper stoked 😎👍
@@aliceinchains5243 Great Choice. We hope you enjoy the mow!
ok so i just bought a brand new 42 inch timecutter from tractor supply and runs good but when i pull the dipstick if its running oil shoots out and it seems excessive too me lots of blow by going on
it has less than an hour on it? do i call kohler or what ? it has the kohler 7000 22hp
2023 year model
please help
Don’t pull the dipstick while running, everything is fine
@@mainstreetmower lol how did I know you would say that
I have a 21 Inch Toro super recycler. What choices do I have for the mower blade? Of course I want the best you can purchase. Thanks
toro is a great mower but i think wright sells more in the stander department. I have been to dozens of dealers in the upper east coast and its rare to find a dealer that doesnt carry wright standers, t takes a minute to find a commercial toro dealer though. from what most of the dealers tell me they sell more wright stander i, b, and x models than most other similar commercial mowers.
My Turfmaster keeps Breaking down 4 times in5 1/2 months I reckon I’ve been ripped off. Lemon
Replace the engine lol
I really want the 34 timecutter. Hope my local dealer can get one
Hope you get it soon. It's a great machine in our opinion.
No one has the 34" where I live. Sold out everywhere. 42" is in stock in multiple places though
Can you make a video on the 'toro Navigator ?
Thank you for your request Angel. We'll put this in the pipeline.
I have told my husband no not yet before lol
Is that innuendo? 😂
At the price my time master was they should have solved the clogging issue but they hadnt its a clog monster
Since toro canceled their engine, which engine is the best now? In walk behinds.
It’s not a matter of which engine is best, for the remainder of 2021 and 2022, it’s a matter of which engine is available. Briggs and Stratton will pretty much be the only option available from all mower manufacturers except Honda. Honda stopped providing GC engines to all other manufacturers. You may run into a model or two with the Kohler XT675 engine but this is not Kohler’s proudest achievement, given the two options a Briggs is your best bet.
@@mainstreetmower thats interesting because I prebought a toro with a Honda engine online from a popular tool company. I guess they didn’t know what you do before they listed it. “Shipped in January” is what there site said.
Those 34’’ are popular, I don’t see any in your stock. I hope you guys made it through Ian well. 🐊
We have been out of stock for a few months now, hopefully back in stock soon. We had it easy in central Florida compared to other counties
@@mainstreetmower Thanks for the reply. We did really well on the treasure coast. I think if you did a Timecutter vs Husqvarna Z242F would get some good views.
@@floridamanrun463 Thank you for the suggestion. We'll put it up the pipeline.
@@mainstreetmower after watching a ton of your content, and others, I pulled the trigger on a Toro 75746. I really appreciate the content you put out, it helped me in my decision process immensely. It was available from a big box for a little cheaper, but I chose to support the local guy (Jordan Power Equipment) in Vero Beach. Again, thank you so much.
@@floridamanrun463 That's awesome of you to support local. Congratulations on the new Mower, hope you have fun with it.
If you want a timecutter or a timecutter 30 “commercial “ just buy a Ferris. It’s not worth the fight.
If this response can get 100 likes, we will make a TORO vs Ferris video.
dude, how MANY commercials???? Why would you do that ??
Hey Kevin, sorry about that. As a fairly small channel, we have to rely on youtube ads to continue making videos. However, since we're not fans of ads either, I have requested to reduce the amount of ads CZcams shows on this video.
The 30 inch toros aren't as reliable as you say they are. Our company bought a bunch of 30 inch toros with the Kawasaki motor and they all had problems related to random bolts unscrewing, to mower decks cracking, and engines breaking. Extremely unreliable buy a second mower as a backup, you'll need it!
That's very unfortunate. We're sorry you had that experience. However, that's not something that we hear much, if at all, in our service shop.
the price per month part was odd.
Hi Christopher, can we help you understand that part?
It’s not odd. When you are a business owner, you get it. You sometimes have to not just look at what the mower costs to buy, but it’ll cost you over the spread of loan(if you get one). Because $8000 can seem daunting but when you spread it out over 36/48 month 0% loan, it’s not bad at all.
@@michaellarrick8881 have you ever complained or made a comment to someone else about the price of gas/food/housing? ....
yeah don't worry about the actual price, just pay xxx.99 a month.
@@christopherkeene3647 you don’t understand business. It’s all good
are they made in China ?
No everything but the Recycler is made in Minnesota. Toro is an American company founded in 1914. In their early years Toro build farm tractors and later built tanks for the US army during the World Wars. Today The Toro Company is the largest mower manufacturer in the world worth over $10b. Toro has a portfolio that includes eXmark, Irritrol, Ditch Witch, Z-spray, Left Hand Robotics….and is the market leader in both innovation and sales across most of their product families. The recycler push mower is made in a Toro owned and operated factory in Juarez, Mexico.
@@mainstreetmower I was looking at a mower in a local store as I used to use Toro in the 90’s when I was a green keeper to do the greens they were very good when they worked but if they went wrong it was always expensive no matter what.
The one in the local store was around 21 inch ideal for our back garden area but when I read made in China and a Mcallister what’s next to it was identical but for the colour and about 25% cheaper so I left it I ended up getting a Stihl RM 253 T. What was in the sale at another garden centre for just £200 it’s a really great machine first fill and oil put in and it started on the very first pull so very happy and cuts great.
If the Toro was made in USA I would have bought it but passed and ended up with a great mower half the retail price.
Who care about per month pricing. Total price? Cash?
People that want to finance?
My calves are getting to big too fit my skinny jeans Lmmfao
haha
34" riding mower will not fit 36" gates. It needs a 40-inch clearance, i waste my money on it.
i appreciate the content but i can’t watch this channel anymore. the boomer editing is too cringe. why is this edited like a brett cooper video?
Toro residential lawnmowers are junk!😂