Lithium Drill Restoration DEWALT DCD 710 12-Volt Drill Restore
Vložit
- čas přidán 5. 09. 2024
- This restoration project took more than one month, during which time it was moved to a new workshop, a larger space for more interesting videos in the future. If you enjoy my videos, please subscribe to my channel, thank you!
It was DeWalt. Now it is Ryobi ))
or fake dewalt from aliexpres :)
Pense lo mismo jajajajaa .igual la verdad bien ahi en la reparación
@@jorge.ruiz. Electronica y mecanicamente, impecable. Esteticamente, un asco :P
@@Cabeza492 el.amarillo en aerosol es muy malo malo malísimo pero vale mucho el trabajo
hahaha i thought the same thing
For 50 plus years I've restored items but never have I came close to the extent of prefection you have done here. You are the best I have ever seen anywhere! Thanks a million for sharing.
5
painting was really a bad idea. After some use ut will chip off and look worse than before painting.
If you heat the plastic with a heat gun it melts the oils on the top layer and restores it to pretty much new, I've seen it done in car videos for restoring faded bumpers and upholstery, I'd imagine it'll work for these type of plastics too (maybe). Great job getting it work again tho, but I feel it got ruined with the awful paint, I'd strip it back again!
Lol, this was like watching a documentary about an abused Donkey that was rescued and now lives happily in a meadow....Great job!!
I watched this video 4-5 times with pleasure.inspires me a lot.you fixed a crushed drill very well.thank you for sharing.
Nice job!
Great Job (except for the paint ;) )! Can you give the name of the spot welder?
I noticed he downgraded from Dewalt to RYOBY 🤣
@@wondernoodles9394 or Greenworks
Thanks a lot very interesting to restore this material That's kind of U ... Tabet from Oran In Algeria
Go😂od!!.. Now it's RyWalt !!
excellent impressive. for a moment i thought u will repair the motor if you did that would of been epic
Thank you very much I actually have the a dcd 710 Dewalt drill
great job of restoring the tool
Nice and good job. It seems that you made an effort to bring it back into service. We ask you, in the event of assembly, to explain slowly how to install it. You have the utmost respect and appreciation for your friend from Iraq.
Respekt 👍.... ich tausche halt die Gehäuse Teile, die sind nicht teuer.... auch erst 7St. wieder auf neu Zustand gebracht...
Jenial
Wow that was an amazing and meticulous job you did on that, nice work!
You're the greatest wonderfull work
Nice job you are the best 👍
... great restoration---
Thank you for share .. 👍👍👍
I can't believe that you hit that gear with a hammer!
Complimenti bravo e competente.
es un gran restaurador felicito
Everything is very good, congratulations, but the color turned out to be lemon :)
Exelente restauración una observacion solo la pintura te quedo mas verde ...adios
d walt
Bienvenido ryobi
Te quedo mismo color que el Ryobi 😂😂😂 pero buen trabajo
From a DeWalt to a Ryobi!
Exactly the same thing happened to me rebuilding my dewalt DCD771 drill the torx 20 snapped. Mine isn’t in as bad a condition as yours and scrubbed up good with a new chuck and torx bolt
Exelente canbio de motor saludos desde panamà💪👌🇵🇦🙋♂️
Just got a hand me down DCD710 that needs some work and I've found very little references to its inner workings. Thanks, it's a shame I can't just replace the brushes without changing the whole motor though.
These look like fun restoration projects. But wouldn't make sense from a financial perspective
참말로 대단타요~~~~
Good job
Top esplicacáo
Good job i have around 25 dewalt machines needs restoration
I wish i have the time to restore them
converted dewalt into ryobi 😂 (color), but great restoration
Looks like a Ryobi now! Lol😂
Always have the gear box in the number 1 gear when breaking the chuck loose. Otherwise you can likely damage the gear box.
Sheikh Zaid wrong, been doing it for 40 years that way. Was factory train by DeWalt Milwaukee makita etc. that’s the way they do it.
meus parabens ficou excelente
Now its a ryobi but nice restoration by the way
All I can say is Wow! Amazing use of your talents! Thank you for letting us all see this happen.
It is always a good idea to repair things if you can, but as the drill was in such poor condition, it is fair to say the batteries will be shot too, sadly, the time to repair the drill body and the cost of the new batteries makes the whole exercise a financial non-starter. If you then factor in your time at say $10/hour and effort .....you would have been better off throwing the drill away. Good to see the inner workings of a Dewalt drill though. Stay safe.
if you watched the whole video he replaced the battery cells.
Excellent restoration! You took what appears to be a heavily used and abused tool likely from the trash and made it completely serviceable again with maybe $35 in parts. I'm doing the same thing with a NI-CD 12v Dewalt drill and Samsung lithium batteries + a BMS is about $25 and I can't imagine the motor costs much since it's probably a fairly common one. Who cares about the paint you have a serviceable tool.
Luxo so pelo fato de ser restaurada
Never seen anybody paint a drill before, the paint will come off though right?
yeah it will.. very easily too.
Personally, I wouldnt paint it, if i was restoring it.. There are better methods to restoring scratched and discoloured plastics...
That is brilliant 🤩
He turned a dewalt drill into a ryobi😁
Awesome job!
VERY GOOD
Я представляю сколько стоит такое востановление😌
Nice one but I don’t think you should paint them it would look better cleaned sanded and maybe a thin coat of clear coat
LoL, You turned it into a Ryobi.
thanks
Excelente 👍🙂
Excellent
SO GOOD
Dewalt 👑👑👑👑
Exelente video 😊
Espetacular
Exemplar
Vc é completo
Este video é uma aula completa
Parabens
hold it up my friend👍
Super
To remove the chuck, you smack the Allen key with the hammer. Smack it good too!!
Amigo dónde encontró esa herramienta para soldar de puntos . Está muy chévere su trabajo . Me gustó la máquina de soldar si sabes dónde la puedo conseguir le agradezco. Desde Colombia
Nice job on it
This tool is made in china. In china, broken tools calls "break dard". So, after restoration. She has a "dark Yellow".
GREAT JOB!!! CONGRATULATIONS!!!
Otro gran ejemplo de su habilidad esta Restauración de taladro de litio DEWALT DCD 710, desde Venezuela le envio mis respetos y saludos.
ho, you're so good at it.
ىزظاظزنتتكطكككگكططككتربل،ي
د
اظءؤ. يةةةي
لولؤةويغررةوىزشصءسشللنمطمك
Hello Could you give me the model of your grease fitting and your welder for batteries? And how does the welder work? It need a high amperage battery? or how does it work? Thanks
I think you need to make yourself a chuck buster. It’s a bit but it’s cut to fit inside a chuck and you can use an impact wrench to get the chuck off.
I mean it’s a bolt
Good.
Wow! Did you invent the cordless drill? Amazing how you repaired the drill from memory.
From his own video, not from memory
Все круто, только покраска корпуса это лажа, лучше оставлять оригинал
Aku harap ada giveaway untuk aku😋😋
you can use a torch to fix the faded finish on plastics instead of painting.
Good job!👏👏👏
Should've kept the original bright yellow colour even if you repainted.
you did a great job but you converted dewalt into ryobi
Una pregunta amigo tengo un taladro dewalt como ese ,se tranco el mandril y cuando lo destrabe se salio una d las muelas que agarran las mechas ,ese mandril se puede desarmar y colocarle la muela en su lugar ,esta como nuebo.o tengo que comorar un mamdril
Great job!
Can you tell us which point welder did you use?
It's Battery energy storage spot welder
I can smell that gasoline now :D
Everything but the paint boss.
Top
In the factory where I work mayby there 're 200 or 400 , You can to be Rich , come on to Algeria in Oran
Был DeWalt стал Ryobi)
Great job, keep gong this way
Really good vid mate!
lo felicito! pero podria ser mejor la pintura no es el mismo color y alguna calcomania hubiese mejorado muchisimo la estetica por lo demas excelente
Parabéns pela obra de arte
Bro made a dewalt into a ryobi
compa echele a los plasticos desengrasante para motor pa que queden super limpios y no batalle tanto tallandolo con jabon
;)
Muito bom
Dewalt in Ryobi colors :) Painting was unnecessary
Looks like a great job, where did you get the motor from?
Cuanto costaria un trabajo de esos
What was that he mixed together? Would like to know
I Never Seen Blue Grease What Kind Of Grease Is That You're Using?
Dewalt virou ryobi 😂
Amigo como chama essa máquina de solda ponto.Edvandro do Rio de Janeiro Brasil