Dolmar 7900 stock vs ported with WoJo muffler
Vložit
- čas přidán 29. 08. 2024
- Here's the wojo'd dolmar from the last video with a port job (still the same untouched chain) what a strong 80cc saw! I'm really anxious to see now how it compete against the new stihl 500i injection saw (they share pretty much the same displacement). I will hopefully pick up a 500i for testing and porting in january ;)
Strong saw ..huge increase in power.. love how it sounds
the comparison to the 500i would be indeed interesting.
Let's see, if the torque and power specs on paper are met in reality!
But don't expect any wonders from the 500i. 80cc is 80cc, injection or carb... the difference is fuel efficiency, to meet upcoming, even stricter environmental laws
Appreciate the basic side by side comparison. Great video!!!
All that power must have scared you by how far you were standing behind the saw. Pfanner pants proves you know what you’re doing
It’s running well now 👍👍
Yessir, best saw made💪🏼
Nice,strong saw,good work!
Dolmar
The Best 😍
this is my dream saw)
@Dechsi87
Did you built that Muffler or got it from somewhere ?
I'm interested, do you offer porting Services ?.
I do
Can’t wait to see the comparison, I believe it will take down the 500i though
Hallo, tolle Arbeit. Gibt es eine Möglichkeit die eigene Säge von deiner Sachkundigen Hand überarbeiten zu lassen? Grüße aus Österreich.
What rpm did you have the stock version set at? The 7900 max rpm is 13,500 and it sounded like you had it dialed down to around 11k. The after video sounded much closer to 13,5.
I did nothing, was a saw from a friend, took it out of the box and did the cuts. But 11000 sounds to low, actually it cuts as fast as the makita stock i had earlier. But if you want I can do a video again with a stock 79 with wojo and a tach with perfect tuning. Ported one was set to 12800 for break in because of the new cylinder.
@@Dechsi87
Where did you got that Muffler from, or did you built it yourself ?
I'm interested, do you offer porting Services ?
Where did you buy the wojo muffler?
I do
👍👍👍
Die ist ja mal echt krass :-D
Do you provide porting services?
Is it the same saw as the makita dcs 7900?
I thought they quit making the 7900??? or I would buy another
they are still making them until 2022 then they are killing their gas powered equipment from what I heard which I personally think is bullcrap
Wojo muffler you say?
Sounds
New video???? ✌
Dolmar 116si the best...
Hello. Mye i ask where are you from and do you sell? 👌😊
I do
Quá xuất sắc luôn
GAINS!!!
The 500 will be lighter, hell, a ported 462 is lighter and runs with the 7900
Σιγα το μπρικη
Whoever this wojo character is they copied my muffler mod. Could care less though...
Saw Greater seriously? Did he really? I have been making these for 12 years. Surely he copied off of me.
Scott Wojo I call my muffler mods, “crazy awesome hp muffler mod”. Guaranteed more sales with a name like that.
@@scottwojo7881
Still doing it ?
@@johnny66star13 not officially. The Gov’ment started to hassle the guys who make engine performance electronics. I felt it was best to stop tempting fate. I still can though.
@@scottwojo7881
Oh... Okay... I guess it could be called a Repair instead of Performance 😅
I would be interested, got a couple of Dolmar Saw's which I think prefer to breeze better...