How To Lube A Garage Door Properly! "Mike's Garage Door"
Vložit
- čas přidán 8. 09. 2024
- Chad from Canadian Door Doctor is working on Mike Holmes' garage door and is helping homeowners along the way on important safety tips that you might not know when it comes to your garage door.
On this episode Chad shows you how to lube a garage door properly.
Learn more about Mike - makeitright.ca...
#MikesGarageDoor
lube all hinges with white lithium grease and spray the torsion spring on top, youre welcome
U just ruined this guy, lol
What spray for the spring? Silicone?
@@philbellmore9944RP7 spray is fine. Don't use WD40
Garage door lubricant. Blaster has it.
Thats what i did. Just put the wd40 white lithium on the hinges and then silicone lube on the smaller moving parts and rollers. White lithium looks like shit tho after its smeared all over and tracks and stuff.
Just the tracks? What about the hinge pins, bearings, torsion spring?
You are not suppose to lubricate the tracks.
That is correct. You only clean the tracks.
Lubricated tracks will collect dust over time and it'll be a pain to get that off.
I agree. I signed off when he mentioned/showed doing that mistake.
well, he did say it's more like cleaning than lubing.
exactly. And how exactly would lubricant "quiet" a wheel that is rolling in the track?? And then he decides at the end of the video that the lubricant is for cleaning the track??? When is the last time you used grease to clean something?? This guy has no idea what he's talking about.
Bob is an annoying know it all. A Kammi Harris voter. @@BobsGT235
can’t believe i followed your advice! After some thought, how does lubricating the tracks leave out the squeaks etc; all it does is provide less squeaking from the wheels with the track and my wheels is not metal that would grind either the track to squeal.
WHAT A WASTE OF LUBRICANT AND TIME. would’ve gotten better advice from the neighborhood street cat.
Who is this guy???😂😂😂
Totally agree now after following this video, what a joke
So what lube did you use?
Mike- you don't mention the brand/type lube you used. Please update.
Use anal ease lube
Do not lube the tracks! Just clean them.
I like the gas pump. Thanks for the info
Wrong wrong wrong. You don’t lubricate the tracks. All you’re doing is creating an environment where dirt and dust will accumulate and make it harder for the garage door wheels to go over or through. You want a smooth and clean track that your wheels can ride on. So clean your tracks with a degreaser until all that junk from your previous lub, dust, and dirt comes off.
You’re supposed to lubricated
It’s supposed to be lubricated
@@xian.irungu not the tracks. Te tracks are smooth enough. Clean them well and carefully run your fingers inside the tracks and you’ll see.
One says this other says that.. I’ll have to watch more videos and form my own opinion.
@@CrazyxxxUkraine ive done both, and just cleaning the tracks was 10x better. It made it easier for the wheels to roll on it without having to go through all the muck that the lubrican collects. It also made it easier for the motor as well. Good luck with it.
Previous owner lubricated tracks with what looks like 10w40 oil. My question is whether to leave it or clean it out? I presume the latter.
Can’t thank you enough for your help. Just subscribed
8350 Schiller Square
Rutherford Parkway
Crona Lodge
Russel Overpass
NEVER lubricate the tracks. They should only be clean, not lubricated. The metal hinges should be lubricated.
This video did not tell me what needs to be lubricated and did tell me to put lube where it should not be put. Is this a prank?
I literally checked to see if it was uploaded on April 1st
Turcotte Shore
Gideon Valley
What type of lube?????? What if you don't have nylon rollers????
Gleichner Road
Ozella Cove
You lubricate the centre of the wheels, not the tracks.
I need a non powered old school ish, just make a shop / old good metal garage door to not be obnoxious.
This video is so lacking in information. Type of lube, what about the chain and spring? Should I lube the wheels? Etc, etc....
Canadians… 🤷🏻♂️
What lubricant is good for garage door track with metal rollers?
Graphite, but you probably have this figured out already.
Yea he is a mind reader knuckle head
Jaleel Ports
I KNOW YOU SAID SHUT OFF POWER BUT WHEN YOU FINISHED WIPING YOU REACHED OUT TO THE SWITCH AND THE DOOR CLOSED. HUH?
Others say do not lube the tracks
Thought u supposed to NOT spray the tracks. Don't u want the wheels to roll n not just slide up n down the tracks??!
👍
White Court
don't lube tracks. lol
Don’t do it ! will jump off track. 500 dollars to fix
Thank you for helpful video!
You aren't done. You need to lube the chain and the spring. Why not put it all in one video
wtf!!? DO NOT DO WHAT HE SAID. oh my god
But why?
This video is trolling us
WRONG!!!
Don't do this! Wrong advice, all what this will do to a garage door is attracted some dust!
Man, this video is all just wrong lmao.