Fantastic information for the Lectric ebike 3.0.😀 The original PA start off "kick" kept me off my bike for months; I'm going to try the different PA throttles!👏 That setting may make a "U-Turn" easier. Also, as I was walking my bike up a short hill of grass to the bike path (left hand on grip and right hand on seat) it got away from me! I didn't understand that putting pressure on the seat affected or engaged the PA. Very easy to understand instructional video, THANK YOU!
Ive tried tire size at 20, 23, and 24 seems 23 and 24 are showing faster then my speedometer app on my phone. Not sure what is truly correct. I think the default setting at 20 may be most accurate, idk for sure
I tried recalibrating with speedometer app but the problem with a lot of GPS apps is that they bounce a lot. I also found that the XP 3.0 display reading varies if you pedal vs using throttle only. As long as it's close, I'm mot stressing about it :)
Hey, thank you so much for this. I'm awaiting delivery on my XP3.0 and was worried about all the settings I keep hearing about in the forums. Can't wait to get mine and get started!
wow this is super helpful. I just bought fat tire dirt bike and doesn't really feel comfortable with the original setting. But with your setting, I feel like a bird 😁
It's a rear motorcycle stand, given to me with a past bike purchase but Harbor Freight and Amazon have similar ones. Search for "adjustable rear motorcycle stand". Here's one from Harbor Freight: www.harborfreight.com/low-profile-rear-motorcycle-spool-stand-99701.html?campaignid=12144811130&adsetid=117789318878&product=99701&store=417&gclid=Cj0KCQjw2v-gBhC1ARIsAOQdKY2L3UE87ouFaSBpth2dtmxCGwDSbMw-ZKoHRV8r5za-9OhcWnE5pJgaAl0dEALw_wcB
There are 2 more settings not mentioned. P3 which by default is 48 but I have no idea what that setting affects. P22 which by default is 0. When set to 1 you have FULL range of throttle on all PAS levels
Thanks for trying these out, so I don't have to. I think the P11 setting--for PAS sensitivity--may count the number of magnets on the foot crank passing a spot before starting the motor. So, how much of a circle do you pedal before getting help, measured in about 30 degrees each?
We went through three settings on both our Lectric bikes . My bike works just fine. My husband’s bike will not go . It can only peddle. You would think the battery is dead but it is fully charged. The screen shows it’s charged and we charged it all night but the light never turned green. His throttle doesn’t work now. Any suggestions on how to get it going? We thought maybe set it back to factory settings and it still doesn’t do anything. Thank you both for a great video. It has helped us in many ways.
I have both 2.0 & 3.0 in LR ST. I am extremely disappointed with my 3.0 not being able to have full throttle on assist level 1 or 2. I would teach people to take off with the throttle then pedal. But now the 3.0 has to be on pedal assist 3 or higher to get the throttle to go full. SO now when you take off in level 1 or 2 the bike has very little power, 2 amps in level 1 to get going with the throttle. It almost gets stick in the grass, its got no take off power anymore. Nothing like the 2.0. I like a new ridder to start out on level 1. Not have them flying on level 3 when they start peddling just staring out. There is no way to change this throttle problem. I talked to Lectric & was told the new controller PWR can not be changed to get full throttle in level 1 or 2 anymore. Has to be on level 3 or higher. This just bites! Setting 23 to #1 does not change the throttle power on assist level 1 or 2. Had my 3.0 for 2 days & looks like I will be selling it. Yes the 3.0 bike rides better than the 2.0 but the new controller bites on the 3.0. Lectric's new "ONE" bike you can change this but that is the only bike you can change the throttle response on level 1 or 2. Unless you bump to level 3 or higher, when you take off with the 3.0 bike it is now ballsless. Same for coming to a hill in level 2. Hitting the throttle does nothing! You have quickly bump to assist level 3 so you have throttle control. This just bites.
I just got an email from lectric about how to get the PWR programming on my XP3.0. I usually ride in PAS 3-5 so I'm going to try it and report on my findings. I have seen several comments like yours with some not liking it much.
@@LectricGo "Not liking it much" boy that is an understatement, lol. If you find a way to get this throttle fixed/reprogramed please please let me know. (before I just sell it) . Love my 2.0 it's a brute compared to this 3.0. Lectric told me they are going with this new controller, "sorry you don't like it you can't change it". I rode 15 miles today. Throttle is so non responsive even in level 3. It has to be in level 5 to get somewhat full throttle. This bike is a dog. This 3.0 can't even do donuts tehee this 3.0 is a boat anchor compared to a 2.0. Thanks for your reply, signed "desperate to get my throttle back"
Like you, Larry- I had two 2.0’s- and not happy with our two new 3.0’s- for the reasons you mentioned above. I hope someone figures this out soon. (Or maybe, Lectric can issue a firmware update to fix this.)
Me too! I just figured out yesterday on my second ride about this problem with the throttle. I had a Lectric Lite and the throttle was unrestricted on all modes. I had no reason to think the 3.0 would be different. I like to ride in mode two, and the throttle barely works at all! This is crazy and I hate it! I'm really angry about it actually, they just wrote me back that I can't change it and I wrote them back a really angry email. Everyone should! I told them it was false advertising!
thanks this is a great very helpful video, a question, how can i regulate the speeds of each pedal assisted mode, like if i want PAS 1-11m/h PAS 2-17m/h etc?
Have you figured out how to unlock the speed for Throttle? Cause unlocking it as a Class 3 ebike is only when you're pedaling, otherwise you get stuck at 20mph throttle
@nitebeest Yes, but from what I've seen, even when you put it into PAS 5 completely unlocked, the throttle will still do 20mph max, it only gives more power to go 28mph+ when you pedal,.. and was asking if there was a way to have the same 28mph+ on the throttle
Awesome video!!! Thank you! Stupid question, but my wife just bought me the XP Lite, and the class 2 speed setting cannot be bumped up to class 3 28mph. All other settings you recommended were adjusted. Is there another way to bypass or am I sticking at 20mph?
Hello . I need yo change the system because too fast . I want to do 25 km max and without the gazi ! In the video do you fix the system for 25 km or more fast?
Thanks for the video. I trying to decide between the Standard or the Step Through (ST). I know the ST pedals are lower. Since you have a ST, have you had any issues with pedal strikes on the ground especially on turns?
Watch out Lectric will send it as class 3 which in some states requires a license to drive unlike class 2. it is based on state laws which require mentioning of max speed. mine came labeled as class 3 with top speed mentioned fighting your not using it as class 3 is impossible to prove.
Hi i have a 2022 MX03 with a M5 controller. When turned on & pushing my Ebike outside i accidentally touched something on the controller & now the controller still comes on my throttel does not work ? Can you help me please.
I decided to leave that setting out because it can't be turned on through the settings menu. It is activated outside of the menu by holding the minus and power buttons at the same time.
I mistakenly touch any button and now speed of my ebike is limited to PAS 1 speed and motor power also Speed not going above 10kmh Anybody can help me?
Hi, amazing video! Quick question: is it possivle to adjust throttle intensity? I believe mine is very sensitive and its taking off too fast. Thank you!
On mine, The throttle barely works on PAS one, it works a little more on PAS two, and for the higher modes it works very swiftly. I asked the company about it and they said that's just how it is. So I'm looking at how to change the throttle setting, there has to be a way.
Hi great video I have a keteles k800 and I just disabled the throttle till I get use to it it takes of very fast and it is so easy just to flip the throttle by mistake do you k ow what setting 15 is I changed mine by mistake and it’s at 39 I think yours in the video is at 40 ?
What bike are you riding? XP 3.0 or a different model? On my XP 3.0 you hold the throttle at a steady position while pressing and holding the "-" button on the left control pad until "cruise" is indicated on the display.
Isn’t there an adjustment that you can set speed perimeters for each PA level? I’ve done this on my older Lectric 2.0 but now I have a 3.0 and I need to make those changes also.
New display , harness, and controller. Bike working, but motor cuts out, then winds back up to fast, then hesitates/ cuts out, then right back on....HELP
On my bike when I use the throttle it gives me power but when I pedal it dose not give me power and I have the mode on the display set to be able to use the throttle and pedal assist do you know why my pedal assist is not working?
Damn there's no way to control the max speed for each pas level? Like for example Pas1: 6mph Pas2: 9mph Pas3: 12mph Etc etc or however you want to do it?
Why would you want to? I actually enjoy riding in PAS two and going 18 mph. It's better exercise. I was happy they allowed me to decouple the speed from the mode. On the other hand I'm really angry about the throttle working different in each mode.
Do you know if you can find the information for the movcan v30 or respond with a link to the p settings list and information because i want to get that one
The brakes aré unbranded mechanical brakes. It does appear there are hydraulic retrofit options that include the ebike cutoff switches. I will upload a video on the topic if I decide to upgrade. May only do the front.
I will be ordering the XP Trike this week and will be able to experiment with it soon. My understanding, however, is that trikes need to be limited to much lower speeds. They become unstable in corners at high speeds. I don't expect the ability to unlock higher speeds.
Any settings not in the manual and not covered here are not user adjustable. They are settings for things like battery pack voltage which you cannot adjust for the motor/controller combination that come stock.
I just got a pair of 3.0 extended range walk through bikes, and today was our first ride. We were both wanting to try minimal PAS #1, but it kept "crow-barring" the max speed - coasting downhill or not - to 9mph. This meant either no assist or PAS-2 or higher for the entire ride. I came to find PAS-0 on a flat very tough, because the bike is so much heavier than I've ever ridden. Suffice it to say, I was slightly disappointed with my first ride. I basically used 60% of the battery on a flat 22 mile ride. I remembered watching this video as we waited for the bikes to arrive and watched it again and didn't see a setting to address this issue. I then looked at the manual and it shows a P22 setting which will turn this "PAS 1 and 2" governor OFF allowing for full speed on both - up to the P8 setting max, for like coasting downhill, etc. I just found this in the manual and this comment section of this video, so fingers crossed on my next ride it works. I'm still not sure if there is a cut-off on the electrical assist for each PAS level and what they will be, but having it resist your speed means it has to use power to do that too. Don't want that! Hope it works!
Do you know what im doing wrong or need to do when i go to my p08 to make it faster its at 32 and im trying to get it to 100 but when i press the plus botton the number 32 just blinks?
Great video! Much more helpful than the manual. Appreciate this content.
Awesome disclosure. Thanks for sharing
The best instructions for setting/programming an ebike controller display. Thanks!
Thx u. U just helped me fix my pedal assist
Outstanding comprehensive mode setting Video. Well done thanks.
Glad it was helpful!
THIS WHOLE VIDEO IS 🔥 🥵 REALLY thanks for all the time you took to make it 😊
Glad you liked it!!
Just got me bike today...This was just what I needed! Thank You Mate!!!
You are very welcome!
How long did it take. It’s been two 13 days already for me.
@@SkullarkEcko About 2 weeks. The problem now is the power to the controller will shut off after about 20 min of riding🙈
exactly what i was looking for. simple and example explinations of each parameter, ty
Glad it helped!
Great video. Super helpful. Well done!
Fantastic information for the Lectric ebike 3.0.😀 The original PA start off "kick" kept me off my bike for months; I'm going to try the different PA throttles!👏 That setting may make a "U-Turn" easier. Also, as I was walking my bike up a short hill of grass to the bike path (left hand on grip and right hand on seat) it got away from me! I didn't understand that putting pressure on the seat affected or engaged the PA. Very easy to understand instructional video, THANK YOU!
I have same problem with the “kick” . Would be Interested to see if you figure out a solution. Please post your results. Tia
Thanks this is helpful, used the manual to setup but your video makes more sense.
Thanks what I needed to know I lost throttle control and pedal assist. Going to try going threw each setting you shared 👍🏾🚴🏿
Sounds like it could be more than settings. Make sure all your connectors are tight.
Great video. Thanks. It works for the display on my evercross ek6 as well. Well explained. Straight to the point.
Glad to hear it helps for other brands/models 👍🏼
Great information and video, thank you.
Just adjusted, very helpful thank you very much.
Great to hear!
I'm getting mine's Tuesday and I'm so happy I will let you know how's the ride.
Congrats! I'm sure it will be lots of fun 🤩.
very useful thanks man
Thank you...
Very useful thanks and what about options 5, 7 and the rest not mentioned, what are those for?
Hey buddy great job on break in down the modes 👍🏾🚴🏾♂️👍🏾✌🏾😎🤴🏾✌🏾👌🏾😁😎🤪🚴🏾♂️
Thanks 👍
Great video. Very helpful my friend.
Thanks, glad you found it helpful!
Ive tried tire size at 20, 23, and 24 seems 23 and 24 are showing faster then my speedometer app on my phone. Not sure what is truly correct. I think the default setting at 20 may be most accurate, idk for sure
I tried recalibrating with speedometer app but the problem with a lot of GPS apps is that they bounce a lot. I also found that the XP 3.0 display reading varies if you pedal vs using throttle only. As long as it's close, I'm mot stressing about it :)
😂😂 great video well explained pluss no horrible background music
Thanks...music is usually a bad idea as musical tastes are all over the place :)
Very good information and well done. Thanks for posting.
Great instructional video! This helped out a ton!
Hey, thank you so much for this. I'm awaiting delivery on my XP3.0 and was worried about all the settings I keep hearing about in the forums. Can't wait to get mine and get started!
You're welcome! Settings are fun to experiment a bit with to make the bike feel better tuned to you.
wow this is super helpful. I just bought fat tire dirt bike and doesn't really feel comfortable with the original setting. But with your setting, I feel like a bird 😁
Where did you get the bike stand? Very good video
It's a rear motorcycle stand, given to me with a past bike purchase but Harbor Freight and Amazon have similar ones. Search for "adjustable rear motorcycle stand". Here's one from Harbor Freight: www.harborfreight.com/low-profile-rear-motorcycle-spool-stand-99701.html?campaignid=12144811130&adsetid=117789318878&product=99701&store=417&gclid=Cj0KCQjw2v-gBhC1ARIsAOQdKY2L3UE87ouFaSBpth2dtmxCGwDSbMw-ZKoHRV8r5za-9OhcWnE5pJgaAl0dEALw_wcB
There are 2 more settings not mentioned. P3 which by default is 48 but I have no idea what that setting affects. P22 which by default is 0. When set to 1 you have FULL range of throttle on all PAS levels
P3 is 48V Voltage. The selection settings are 24V, 36V, and 48V. This shouldn't be changed unless advised by an authorized rep.
Do you have the newer PWR controller? Setting 22 is not adjustable on older versions of the XP 3.0 controller like the one I have.
Thank you man very helpful
What setting will allow me to distance travel while riding and maintaining charge on the battery with solar and a mppt booster?
Thanks for trying these out, so I don't have to.
I think the P11 setting--for PAS sensitivity--may count the number of magnets on the foot crank passing a spot before starting the motor. So, how much of a circle do you pedal before getting help, measured in about 30 degrees each?
That makes sense. Set at 24 it did take approximately two full turns. Set at 30 degs, 12 magnets x 2 turns would equal 24.
Thank you for this very informative video loved it
Bob
Glad it was helpful!
Good video thanks. I have both the 2.0 and 3.0 and was super helpful. Ride safe😊
Thanks, you too!
thank you
Great information.
Glad it was helpful!
Do you know a setting that deal with throttle, mine seems to lag or rev up before kicking in?
Awesome vid. Thanks!
We went through three settings on both our Lectric bikes . My bike works just fine. My husband’s bike will not go . It can only peddle. You would think the battery is dead but it is fully charged. The screen shows it’s charged and we charged it all night but the light never turned green. His throttle doesn’t work now.
Any suggestions on how to get it going? We thought maybe set it back to factory settings and it still doesn’t do anything.
Thank you both for a great video. It has helped us in many ways.
Great video, just got my bike, but for some reason the bike will thrust without me using the throttle. And it's in spurts 😂
Thank you so much i needed this info . Do you have all seetings of the display?
I have both 2.0 & 3.0 in LR ST. I am extremely disappointed with my 3.0 not being able to have full throttle on assist level 1 or 2. I would teach people to take off with the throttle then pedal. But now the 3.0 has to be on pedal assist 3 or higher to get the throttle to go full. SO now when you take off in level 1 or 2 the bike has very little power, 2 amps in level 1 to get going with the throttle. It almost gets stick in the grass, its got no take off power anymore. Nothing like the 2.0. I like a new ridder to start out on level 1. Not have them flying on level 3 when they start peddling just staring out. There is no way to change this throttle problem. I talked to Lectric & was told the new controller PWR can not be changed to get full throttle in level 1 or 2 anymore. Has to be on level 3 or higher. This just bites! Setting 23 to #1 does not change the throttle power on assist level 1 or 2. Had my 3.0 for 2 days & looks like I will be selling it. Yes the 3.0 bike rides better than the 2.0 but the new controller bites on the 3.0. Lectric's new "ONE" bike you can change this but that is the only bike you can change the throttle response on level 1 or 2. Unless you bump to level 3 or higher, when you take off with the 3.0 bike it is now ballsless. Same for coming to a hill in level 2. Hitting the throttle does nothing! You have quickly bump to assist level 3 so you have throttle control. This just bites.
I just got an email from lectric about how to get the PWR programming on my XP3.0. I usually ride in PAS 3-5 so I'm going to try it and report on my findings. I have seen several comments like yours with some not liking it much.
@@LectricGo "Not liking it much" boy that is an understatement, lol. If you find a way to get this throttle fixed/reprogramed please please let me know. (before I just sell it) . Love my 2.0 it's a brute compared to this 3.0. Lectric told me they are going with this new controller, "sorry you don't like it you can't change it". I rode 15 miles today. Throttle is so non responsive even in level 3. It has to be in level 5 to get somewhat full throttle. This bike is a dog. This 3.0 can't even do donuts tehee this 3.0 is a boat anchor compared to a 2.0. Thanks for your reply, signed "desperate to get my throttle back"
Like you, Larry- I had two 2.0’s- and not happy with our two new 3.0’s- for the reasons you mentioned above. I hope someone figures this out soon. (Or maybe, Lectric can issue a firmware update to fix this.)
Me too! I just figured out yesterday on my second ride about this problem with the throttle. I had a Lectric Lite and the throttle was unrestricted on all modes. I had no reason to think the 3.0 would be different. I like to ride in mode two, and the throttle barely works at all! This is crazy and I hate it! I'm really angry about it actually, they just wrote me back that I can't change it and I wrote them back a really angry email. Everyone should! I told them it was false advertising!
thanks this is a great very helpful video, a question, how can i regulate the speeds of each pedal assisted mode, like if i want PAS 1-11m/h PAS 2-17m/h etc?
Great vid. How do you change the TRIP A/B settings?
When the bike is on, you tap the power button to scroll through the different mileage, voltage, current and time indicators.
Is there a way to get full blast speed from a standstill and be in pas #1 or would it be limited to the pas #1 setting
Have you figured out how to unlock the speed for Throttle? Cause unlocking it as a Class 3 ebike is only when you're pedaling, otherwise you get stuck at 20mph throttle
I'm pretty sure throttle is pegged to 20 mph regardless of class. Though with PAS 5 and class 3, 28+ mph should be pretty easy to achieve.
@nitebeest Yes, but from what I've seen, even when you put it into PAS 5 completely unlocked, the throttle will still do 20mph max, it only gives more power to go 28mph+ when you pedal,.. and was asking if there was a way to have the same 28mph+ on the throttle
@@mobiusgaming781 I meant with pedaling, 28+ should be doable. Throttle seems to be set at 20 regardless of class 2 or 3 and PAS settings.
Unfortunately that is not possible with the stock controller. :(
Awesome video!!! Thank you! Stupid question, but my wife just bought me the XP Lite, and the class 2 speed setting cannot be bumped up to class 3 28mph. All other settings you recommended were adjusted. Is there another way to bypass or am I sticking at 20mph?
Class 5...warp speed unlocked
😆 🚀
Hello . I need yo change the system because too fast . I want to do 25 km max and without the gazi ! In the video do you fix the system for 25 km or more fast?
I appreciate this info I was considering this bike till I saw you can't do 100% throttle in class 3 mode
Yes you can.
No you can't. It goes 20mph
@@mikemaher6375how? I only plan on buying this if I can find information on how to
P22 set to 1
Thanks for the video. I trying to decide between the Standard or the Step Through (ST). I know the ST pedals are lower. Since you have a ST, have you had any issues with pedal strikes on the ground especially on turns?
I have had some pedal strikes when attempting to pedal through turns. I've learned to stick mostly throttle on sharper turns.
Watch out Lectric will send it as class 3 which in some states requires a license to drive unlike class 2.
it is based on state laws which require mentioning of max speed.
mine came labeled as class 3 with top speed mentioned fighting your not using it as class 3 is impossible to prove.
Thank you!
It is strange to me though that showing the clock is not an option
Will a 3.0 v 4.0 fat tire on a 20" rim give you the same speed reading?
Is it absolutely necessary to modify these settings? Are the default settings safe and usable out of box or will I have to adjust something?
Out of the box settings are safe and useful. Most people do unlock to class 3 to be able to hit 28mph though.
Hi i have a 2022 MX03 with a M5 controller. When turned on & pushing my Ebike outside i accidentally touched something on the controller & now the controller still comes on my throttel does not work ? Can you help me please.
for sensitive eyes, use the secret setting. Rotate entire display light down on handle bar, til you cant see it at all.
😆
I really wish there was some instructions for the hey bike race max on settings i cant find much
Same question here. Has anyone tryed this on a heybike max ?
You missed one setting I think. I read there is a passenger mode setting that limits the speed to 10 mph
I decided to leave that setting out because it can't be turned on through the settings menu. It is activated outside of the menu by holding the minus and power buttons at the same time.
P3 is set for 36 volt and it has a 48 volt battery..would this be why the volt meter doesn't work?
I mistakenly touch any button and now speed of my ebike is limited to PAS 1 speed and motor power also
Speed not going above 10kmh
Anybody can help me?
Thanks for the video now it seems that my pedal assist won’t engage and my throttle will not engage?
Check all your connectors. Push them in and make sure they are tight.
Hi, amazing video!
Quick question: is it possivle to adjust throttle intensity? I believe mine is very sensitive and its taking off too fast. Thank you!
On mine, The throttle barely works on PAS one, it works a little more on PAS two, and for the higher modes it works very swiftly. I asked the company about it and they said that's just how it is. So I'm looking at how to change the throttle setting, there has to be a way.
Don't forget the sequence to save and exit programming.
I can’t change my #8 setting up or down. I have the basic model.
To use walk mode more safely
,have bike in gear 1 pos 1. Otherwise it walks more like a run.
The hub motor drives the wheel directly without going through the gears. I'm curious to check if PAS level has an effect though....
True for Lectric premium. Not a hub drive.
why does this lcd die so fast i got my xpedition in less than 2 month and the lcd wont turn on.
What about all the other settings that were skipped? Do you know what they are?
The skipped settings are either locked out or not recommended to be adjusted as they relate to things such as battery voltage which is "fixed".
Hi great video I have a keteles k800 and I just disabled the throttle till I get use to it it takes of very fast and it is so easy just to flip the throttle by mistake do you k ow what setting 15 is I changed mine by mistake and it’s at 39 I think yours in the video is at 40 ?
How do you engage cruise control when riding. Also I can't move controller to the next setting so I can set mileage to miles /hour
What bike are you riding? XP 3.0 or a different model? On my XP 3.0 you hold the throttle at a steady position while pressing and holding the "-" button on the left control pad until "cruise" is indicated on the display.
Isn’t there an adjustment that you can set speed perimeters for each PA level? I’ve done this on my older Lectric 2.0 but now I have a 3.0 and I need to make those changes also.
Why do I have to pedal mine before the motor will kick in for either pedal start and throttle?
Check that P09 is set to zero and check any connectors coming off of the throttle are tight!
Can u edit the pedal assist % on each level of pas?
That level of customization is not available on the current controllers as far as I know.
Has anyone tryed this on a heybike race max ?
Can you tell us what bike stand you have that works well with the e-bikes
My Lectric XP has 22 settings and #22 CAN be changed! ~ Anyone figure out what it is yet? PWR?
I'll be getting PWR soon and will be able to confirm.
New display , harness, and controller. Bike working, but motor cuts out, then winds back up to fast, then hesitates/ cuts out, then right back on....HELP
On my bike when I use the throttle it gives me power but when I pedal it dose not give me power and I have the mode on the display set to be able to use the throttle and pedal assist do you know why my pedal assist is not working?
Hey just getting my bike and what if my bike flash on and off?
Make sure the key underneath is turned to the on position!
I made my bike go super fast but my speed is not going up. Do you know what to do?!?
Some owners have had to ask Lectric for a new display. Try to push on all the connectors to make sure they are tight.
How do I turn on the front light and back lights
Damn there's no way to control the max speed for each pas level? Like for example
Pas1: 6mph
Pas2: 9mph
Pas3: 12mph
Etc etc or however you want to do it?
Why would you want to? I actually enjoy riding in PAS two and going 18 mph. It's better exercise. I was happy they allowed me to decouple the speed from the mode.
On the other hand I'm really angry about the throttle working different in each mode.
How dou you set the automated to show faction of miles
Unfortunately you can only see whole miles.
Do you know if you can find the information for the movcan v30 or respond with a link to the p settings list and information because i want to get that one
----- I can see a night riding problem with that bright white display wiping out your night vision. Am I wrong?
Definitely set it to the dimmest mode.
question what brakes or brand come on the bike and can you put hydraulic brakes on it. thank you for any help.
The brakes aré unbranded mechanical brakes. It does appear there are hydraulic retrofit options that include the ebike cutoff switches. I will upload a video on the topic if I decide to upgrade. May only do the front.
@@LectricGo All 3.0's are not eligible for the hydraulic brake upgrade kit, free of charge from Lectric.
My controller has no power.Do go to 9 to activate it?
I'm waiting for my Lectric trike to be delivered but, top speed they say is 14 mph. Can I change a setting to make it go faster?
I will be ordering the XP Trike this week and will be able to experiment with it soon. My understanding, however, is that trikes need to be limited to much lower speeds. They become unstable in corners at high speeds. I don't expect the ability to unlock higher speeds.
Any info on Trike setting P8. Can you increase speed.?
@@DM-fp8uw Haven't found any info on that. The P8 setting doesn't increase speed.
Does the speed setting work in cruise control one
What are settings 13,14 and 15 for?
Any settings not in the manual and not covered here are not user adjustable. They are settings for things like battery pack voltage which you cannot adjust for the motor/controller combination that come stock.
My throttle does nothing? I’ve tried changing 10 to different settings and still nothing…
Hi how to unlock speed limit..
Up and down buttons don't change the numbers on the dashboard
Thanks but what about p setting 22?
My ? Also
These settings are for the XP3.0. P22 is available on the trike and I set that to "1" to allow for 14mph top speed in PAS 1-5 on the trike.
@@LectricGo I see. Cool. Thanks.
I just got a pair of 3.0 extended range walk through bikes, and today was our first ride. We were both wanting to try minimal PAS #1, but it kept "crow-barring" the max speed - coasting downhill or not - to 9mph. This meant either no assist or PAS-2 or higher for the entire ride. I came to find PAS-0 on a flat very tough, because the bike is so much heavier than I've ever ridden. Suffice it to say, I was slightly disappointed with my first ride. I basically used 60% of the battery on a flat 22 mile ride.
I remembered watching this video as we waited for the bikes to arrive and watched it again and didn't see a setting to address this issue. I then looked at the manual and it shows a P22 setting which will turn this "PAS 1 and 2" governor OFF allowing for full speed on both - up to the P8 setting max, for like coasting downhill, etc.
I just found this in the manual and this comment section of this video, so fingers crossed on my next ride it works. I'm still not sure if there is a cut-off on the electrical assist for each PAS level and what they will be, but having it resist your speed means it has to use power to do that too. Don't want that! Hope it works!
Do you know what im doing wrong or need to do when i go to my p08 to make it faster its at 32 and im trying to get it to 100 but when i press the plus botton the number 32 just blinks?
If u have the xp lite, you can’t unlock it to 28 mph
What does TM stand for on the odometer?
Tripmeter
Recommended 200 (Class 4, 38mph). dont we all wish?!
These types of bike would feel sketchy at 38mph ;)
@@LectricGoi've petaled over 40 and don't disagree lmao
Can’t figure out how to adjust setting 11 or 12. Won’t let me change the numbers of sensitivity
Do you have an XP 3.0? Other Lectric models may not allow these adjustments.
i want to know where i can get that stand
Here you go! amzn.to/3IcxqHD
I only have 4 settings on my bike
Thanks bro super helpful
Welcome 👍!
When I get to p16 what do I do to reset the mileage
How do you turn the lights on ?
With the bike on, hold the + button for a few seconds.