Hydraulic Directional Control Valve with Joystick Pilot Control

How a Walvoil DPC 130 Series 5 Spool Sectional Hydraulic Flow Control Valve fitted with Oil Pilot Control Ports and Manual Lever Boxes with Stroke Limiters works. And how to use Two (2) Walvoil SV01 Monoblock Dual Axis Joysticks with 4 Work Ports for the Simultaneous Operation of 2 Valve Sections.
The DPC 130 has Pressure Compensated Sections and Load Sensing.
So it is suitable for use with Load Sensing Variable Displacement Pumps or Fixed Displacement pumps.
Rated Oil Flow 130 Litres/min (26 Gal/min) at a maximum pressure of 315 bar (4600 psi)
If you are in Australia and want the last and only set available at this supper special price click the link below.
www.hydraulic.online/5-Sectio...

[@jrifire]

Exactly what I'm looking for to convert my firewood mill to joystick 🔥

[@Hydraulic.Online]

Thats Great JR available here
www.hydraulic.online/5-Section-Hydraulic-Proportional-Flow-Control-Valve-&-Oil-Pilots-Two-Dual-Axis-Joysticks-p541379606

[@bb21again.67]

Are electronic joystick models available?

[@Hydraulic.Online]

Yes here is what you will need. www.hydraulic.online/Proportional-Radio-Remote-Control-PWM-8-or-12-Functions-IP66-p491780895 and www.hydraulic.online/Proportional-Sectional-valve-200Lpm-p234291477

[@villageboy9874]

Price plese

[@Hydraulic.Online]

Sorry currently we are sold out. Depending of size and number of functions between AUD 3,000 to 5,000
email us at [e-mail] or telephone [phone]

[@Jack2000xxx]

hi i own a machinery which is controlled with levers, i'd like to ask if there is any way to convert it to electric joystick with the solenoids pulling/pushing the existing distributor without the need to swap the distributor with one with solenoids preinstalled on it, the machine is an "imt 802" just so you can grasp the size of it and it's hydraulic flow/pressure and guess if there is any way to convert it, it operates at about 300 bars

[@Hydraulic.Online]

Interesting Question Jack, you would have to find out the Brand and Model of the valve and then find and contact the manufacturer to see if any other parts are available to fit that model of Valve, chances are that there will be, if the Valve is not too old. An electric Joystick with proportional controls could also be possible, but you would also need to have proportional hydraulic Pilot control valves to actuate the main valve bank. Where in the world are are you. If you and machine are in Australia, send us an email to [e-mail] or call us on 07 5563 1982 .