Adam Savage's One Day Builds: Machining Mystery Prop!
Vložit
- čas přidán 4. 01. 2022
- Adam takes a break from making spacesuits to start another long-term prop replica project, this time collaborating with other propmakers in realizing a complex hand prop. Without giving away what this part is for, Adam embarks on machining two metal rings with precise notches and non-trivial milling operations. It's going to require a little bit of math, a healthy amount of cooling fluid, and plenty of relaxing time-lapses.
Join this channel to support Tested and get access to perks:
/ @tested
Tested Ts, stickers, mugs and more: tested-store.com
Subscribe for more videos (and click the bell for notifications): czcams.com/users/subscription_c...
Twitter: / testedcom
Facebook: / testedcom
Instagram: / testedcom
Discord: / discord
Amazon Storefront: www.amazon.com/shop/adamsavage...
Savage Industries T-shirts: cottonbureau.com/stores/savag...
Tested is:
Adam Savage / donttrythis
Norman Chan / nchan
Joey Fameli www.joeyfameli.com
Ryan Kiser / ryan.kiser
Jen Schachter www.jenschachter.com
Kishore Hari / sciencequiche
Sean Charlesworth / cworthdynamics
Jeremy Williams / jerware
Kayte Sabicer / kaytesabicer
Bill Doran / chinbeard
Ariel Waldman / arielwaldman
Darrell Maloney / brokennerd
Kristen Lomasney / krystynlo
Intro bumper by Abe Dieckman
Thanks for watching! - Věda a technologie
“It looks like the drawing” I was LD on an off Broadway Producions. The director walked into the space and exclaimed “IT LOOKS JUST LIKE THE MODEL” I asked him what did he think it would look like. His answer was - it always amazed him to sit in the production meetings look at the drawings and models, talk about the construction & painting, and then to walk into the theatre and see the final product. May we all never lose that sense of wonder.
"The finished stones will be just like this, but bigger, right?"
amen to that!
Well said!
Not going to lie, I read the title as "Mystery Machine Prop" and got super excited for a Scooby & Savage crossover.
Same
Mystery Busters
a quick tip from an old machinist i learned from that helps with gaining tighter tolerances on axial operations on a mill. Always keep as much of the quill in side the machine when moving in x and y directions and rather than extending the quill move the knee (z-axis) upwards it takes more time and is a moderately annoying process but always helps to relieve chatter and reduce movement of the quill when milling. Just a tip but overall amazing work Adam.
3 Years ago I was an Arborist, and Today I'm a tool and die maker, conceptualizing, designing, and Machining all of my own parts. watching Adam progress, and learn in the shop has been such an inspiration to me, and my Progess in my skills and career. Thank you so much for providing a Positive and safe space on the internet for People like me and other makers, I don't know if you are aware of how much your work means to some of us.
Years ago I was an orchard farmhand, pruning in the winter, now I’m a CNC operator, machining nozz every day.
Finally, more one day builds. Greatly appreciated.
Anyone else notice that "Savage Industries" was credited at the end of the first "Book of Bobba Fett" credits. Looking forward to the video explaining that one. Adam did tease in the space suit build he had been doing a commission. I wonder if that was it?
I hadn't noticed, but yeah, it is there, right at the very end. My guess? If he built anything (ie, it wasn't just a consultancy job), it was related to the three disguised Boston Dynamic Spots walking through the Mos Espa street scene.
Adam Savage is pretty much the world's foremost expert in the field of adding costumes and mods Spots, after all.
I'll be damned. Its on close to the last panel of the credits.
Well spotted!!! Hopefully we get a video of Adam explaining this!!
I love how Adam nonchalantly drills a small center into his chuck to index the part.
I love that they keep in every time the camera falls over! Such hospitable beings.
Just proves that you don't have to be perfect every time for every video.
I absolutely love your chanel. It truly brings me joy in my life. Im in the hospital and cant wait to get home to my space to start making again.I have another 2 months to go before i can go home. Making is as important to me as eating or drinking. It feeds my soul. Watching you make is the next best thing and its keeping me sane. Thank you again Adam.🥰
There is nothing quite so satisfying as to end up with a piece of workmanship that is exactly as the Drawing dictates- similarly there is nothing so relaxing and enjoyable for a retired engineer, than to watch someone create a piece of work utilising his learned skills. Thank you Adam for sharing your work with us old gits, who no longer are able to enjoy the luxury of working in a workshop.
I’m a high school physics teacher. Every year my students design, build, and perform a large scale science demonstration show for the local elementary schools. We have adopted the Mythbusters moto of making it bigger or blow it up. On opening night of the first year of performing, we were doing the bed of nails demo. I was laying on the bed of nails with another bed of nails on top of me and a cinder block on that while my senior AP Physics student busted it with a sledge hammer. We had practiced it dozens of times during the year. However, on this particular occasion a large piece of the block came off and broke my front tooth. Needless to say the show must go on. I went to the dentist the next morning, got the tooth fixed and did the demo four more times that week. Can I please get a chipped tooth demerit badge? Oh, and my wife the chemistry teacher has the block on display in her classroom.
Always a joy watching you create, Mr Savage.
Adam, love your works/been a huge fan for years, can I make a suggestion of merchandise?
Shirts reading:
Savage Builds:
Sometimes it's boring, sometimes it's riveting
I'd buy that
adam is the definition of jack of all trade master of none, but oftentimes better than a master of one.
not highly versed in but always a learning experience and out come is always amazing.
Excellent soundtrack and Timelapse. Thanks for the amassing work.
Thanks for not spoiling the surprise in the title! :)
It is really nice when doing you job gives you that kind of satisfaction.
Looks like fantastic work Adam!! Gripping a part that thin without deformation isn't trivial.
One of the things I love most about making isn't just making the thing, it's making memories. 😉😉
Can't wait to see the finished prop I'm sure it'll be very memorable. ☺️👍
Am I the only one that finds the clinking and clanking of tooling and parts very relaxing, I wish I could find amsr videos of this particular thing.
They look like the locking rings for a spacesuit/glove interface.
That random mention of space suit gives it away. ;)
Oh no I know exactly what it’s for. It is the Blade Runner 2049 memory machine. You can see it on the work bench of the recent quick change tool holder video that came out.
Didn't he already do the gloves of his spacesuit?
@@JosephLovesMovies yup, i have mine in parts beside me, immediatley recognised it.
@@kmain5587 oh that’s so cool! I plan it build one someday one of the best props in the whole movie.
Loved your Collab with G4 with that space suit! it was great to watch!
I like how he just happens to have a screen accurate Excaliber Sword on his design bench like a nice paperweight. That is Boss level.
I built a nice plastic mystery container with a foreboding number on it, like some sort of government secret zombie mutant virus , i put sand in it for weight ,then weathered it up. It sometimes scares people when it's holding down papers lol
After you've been schooled in stuff, the best way to get your wings up is collaborative projects. We used to do that in school, matching things. Weak link breaks the chain and all that. It was fun at the end of the project to see who messed up and who didn't and how to fix it up, which under the teacher's guidance, would end up being a task between the two matching sections. Relay projects, had lot of fun that year.
Really look like that Blade Runner 2049 memory orb!
It's one of my favorite things I knew Adam would make one some day!!!! Hope to see the result soon
I really thing the feels from the butons and the smoothing turning must be something trick to get
Can't wait, for a show and tell maybe?
Bingo
right in one :)
The music paired with that lathe segment was hypnotizing. I could watch that all day
The music was an amazing touch. 👏
Looking forward to the collab with Kyle Hill, sure you two are going to make excellent content as a pair.
23:30 did he just casually bore into his rotary table chuck to mark a position? :D
28:03 "Lays it all out" Loved the unintended pun.
Hey Adam. Love the line " I'm parallel to within a few Microns across 3 or 4 inches". I think we must be about the same age and mix metric and Imperial with impunity! In the UK we have far more metric influence than you do but I still can't bring myself to describe things nominally using millimeters. Thanks for the content. Andy
I thought exactly the same. I assume he meant to say a hundred of a mm!
Adam got me again with Alexa, thanks for the soundtrack!
This is one of the greatest tested videos I've seen. Not too much unnecessary music trying to fill the gaps.
Just lots of shots of Adam working, no jump cuts. We just want to see the whole process.
Could not agree more!!!
Watching this was hypnotizing :)
Nice job.
It’s a lesser spotted ODB! Of course we’re gonna luv it!
21:21 Ugh. Adam, we honestly love you so please, WEAR SAFETY GLASSES! You looking over your glasses while chips are flying off the mill is not a good safety message. Haven't you had a metal chip in your eye at least once now? Come on!
Space is fun, nothing with a space suit obsession, Adam.
The job of manufacturing chips often results in a part coming out of the lathe.
I like the epic music choices
That rubber band trick reminds me of the 84mm Carl Gustaf.
I'm hoping this is for the memory maker I saw on your table. I can't wait to see that video!
Adam Savage... Lord of the rings!
30:16 I had the video going in the background and instinctually exclaimed “hey” in response to Adam as if it was a buddy that just walked into the room. I’m glad Adam also thought his “hey” was comedic 😛
I like when I am not highly versed in some topic and then I am called upon anyway to be the guy that gets things done.
Going metric, finally, I love it.😀
Alexa started playing lord of the rings for me.
Same, and I didn’t mind
reminds me of IG-11, but its probably something for a space suit 🙂
Love the 6 jaw
I REALLY hope this is the memory machine from Blade Runner 2049. Definitely a dream prop to own and dream build video to watch!
Surface plate on a tolley table, nice.
It looks like the drawings.. wheeee.. lol. Fun!
Is this the Colab with science Thor aka Kyle hill. Can't wait for that drop
Is this for the Bladerunner 2049 memory maker handheld device? Feel like I saw it in the background once in one of your videos.
Question for your next Q&A: What do you think of the esthetic created in Neil Blomkamp's movies. Personally I love them.
Hans-Christian Reinecker will be pleased with your work ;-)
Hey Tested, have you considered having Adam and Norm build a remote control camera that could be controlled over wifi? Then when he is filming in the shop by himself, especially over this last year it could have been nice, you could have your camera person working from home and controlling the camera to get better shots, change focuses as needed, etc. Either something on a stand that's got powered wheels, or some sort of overhead gantry, although I think something on a stand would be more versatile across all the Tested makers.
Dr. Ana Stelline’s memory making device from Blade Runner 2049? Just a guess :)
you could be the next PM of the UK. :)
The badges are a neat idea and a few are definitely relevant, but I may as well just get the one for gluing my fingers together tattooed on at this point xD
I love seeing Adam pause and just.... Process. We've all been there, haha.
Good job on the Alexa call out… my echo right in front of my TV started to play the lord of the rings sound track just when you requested it.
Looks like parts of a space suit were the gloves attach to the arm. Reminds me of parts from a weyland spacesuit Alien: Covenant maybe.
Where I work as a CAD drafter I sometimes I have to model metric parts that have to match up to imperial parts.....it can get annoying when it comes time to put all the parts together in the top assembly
Just imagine a collab between Adam and Matt from DIYPerks.
Hey Adam, one day builds!
A question from less than a novice: do you collect all those aluminum scraps and melt them down into an ingot of some kind to reuse?
@10:18 what is the elastic band for?
I'm thinking vibration noise dampening.
I was wondering about this too
Pretty sure he was using it to stop the part from screaming/vibrating. Never thought about doing that but next time I run into a part doing that I am def going to try it.
Please have Adam make a gaffi stick from Star Wars. It would be an awesome one day build!
Kinda reminds me of the housing for an Arc reactor.
I admire your hands on approach and not just getting an automatic machine to complete these jobs.
Those "automatic machines" are a lot less automatic than you probably realize. It takes a lot of expertise to set up and use a CNC machine properly. It's a tool just like any other, it requires the operator to know what they're doing to get the job done.
Just watched Ghostbusters Afterlife your ghost whistles were amazing
Oooo! Is that the sword that you weathered with acid in a previous video?
just throwing this out there. What about a video on sin bars, would go great with yesterdays gage block video,
7:59 Sauron in his workshop.
Adam's hair has gone super saiyan I think
I reckon Adams new super secret project is gonna be a Doggo Space Suit for a Cosmo the Spacedog cosplay for Maggie :D
And if it's not that...then why not?!?
Sounds like the soundtrack to a pirate movie
What is the device called that has a chuck and a knurled ring at 26:00? Looks useful for fine drilling.
It’s crazy how in the Timelapse of the lathe work the lathe seems to looks like it is spinning slower despite going faster
The fixture table actually made it harder for you to dial in your indexer, using your mill table is easier since that indexer comes with guides.
I love this channel. It keeps me going in this never ending apocalyptic reality rn.
clicksprings videos are amazing
Whats your thoughts on the EL400?
22:45 is that dried blood hahah
First music has a Celtic Women vibe to it.
At 25:00 I am realizing that I ought be much more respectful of props and their designers. Thank you for the lesson, Adam.
Is that a new tool post holder on the lathe?
Hey Adam, why did you bore out the whole middle of the stock and waste all that material instead of just cutting a narrow channel closer to the edge and saving the middle for a future project? Sorry if this is a noob machining question.
There's not really any easy way to do that. There are axial parting/grooving tools that do what you're thinking of, but they must be curved more or less close to the diameter being turned. You could use a hole saw, but that's a nasty job, especially in aluminium. You could drill a bunch of holes in a circle and saw out the core that way, but that's even more work. But it all comes down to having stock to grab. Making both in one go is much easier, and requires more clampable stock than any of the above methods would give you.
Two of these each? To send to other builders, probably working with different material? Also random mention of space suits?
Are these glove connectors?
Glove to wrist connector?
Hey Adam , it's a boring job but someone's gotta do it 😊
Where do you get a job where you have to build or make parts based of designs either made by you or given to you?
Im surprised Adam hasn't got an electric or air driven chuck key.
This is when you need a Turret lathe or a turret tail stock.
New band name. Dings and Things
I'm going to guess (wish) this is a collaboration with This Old Tony.
For some reason my brain read the title and thought you were making parts for Scooby and gang's Mystery Machine 😜
Yaaay
One of the scene cuts on the mill goes from a clean block what looks like someone hit an artery
I'm thinking about how you deal with all the shavings/chips that end up all over the place. I find it difficult to clean in my workshop, and it looks like your cave is not as easy to clean as my workshop. Maybe an upcoming topic to talk about in your videos?
MR SWARF
5:20 “They are taking the hobbits-taking the hobbits-taking the hobbits to Isengard.”