Mustang Electric Steering Rack Conversion Kit For Crown Victoria
Vložit
- čas přidán 8. 09. 2021
- f100performance.com/
For Lightning Bolt shirts or the NEW Performance Productions shirts: f100performance.com/collectio...
For new CV subframe E-Rack conversion Kit: f100performance.com/collectio...
This is the brand new F100 Performance Electric Steering Rack conversion kit for Crown Victoria swapped F100 Trucks. This can also be used with other Crown Vic swaps, but you may run into some different clearance issues and so far this kit has only been tested on Ford F100 pickups. We have this kit installed in all sorts of different engine combinations including LS, 2JZ, Coyote and Ford Mod 4.6 and 5.4 in 2V, 3V and 4V engine design with Crown Vic Swapped front suspension. You may need to remount the sway bar further towards the front of the vehicle to clear the new 2015 and newer Mustang S550 Electric Steering Rack. - Auta a dopravní prostředky
I've been waiting to see this!
Grafting a mustang front clip and suspension to my 60 Mercury Monterey and will be using the electric steering rack. Hot wire auto in Mena, AR. is building my harness for the coyote engine and trans. We were discussing if we needed anything special to run the rack, but after watching your video, it looks like no problem. Great video, thanks.
Awesome set up!
Wow, what a super easy install! Thats cool how everything is built into the unit!! You guys are doing awesome stuff!! Now...more Tesla truck updates please!!!!
This is cool. I kinda want one for my Vic.
Cool video, well made. I see easy steering in the near future. 😁
Looking to add one of these to my Town Car, I've had 4 power steering pump failures in the 2 years i've owned it, some due to leaks others to overheating.
what makes them overheat ?????
Nice! What year is the rack from? I'd like to get ride of my manual box on my 59 Galaxie, and put an electric rack in. I think a rack would fit well with the front sump FE.
very very interesting. i have an 08 crown vic p71. this is looking like a very possible swap for me. one issue is the drive belt. not sure on how it would be shortened or? if you can get back to us thatd be awesome!
Would that work if I put a n ignition activated relay between the rack power and the battery so I could ensure its only powered on when the ignition is on? I'm thinking of trying to put an S550 Rack on a 2008 Mustang
I wonder if this kit would work with the Team 321 Narrow crown vic suspension kit
Can you make a kit, mount to bolt into a second gen Camaro ('78)? I could definitely use a system like this for my car.
Sweet video so there's no reason why this shouldn't work on my 2005 Crown Vic police interceptor then right..? Thanks 🍺
Watched again soon
Do you have and adapter kit for an 83 ford f100 with the twin i beam suspension? I'm not gonna covert to crown vic IFS.
I want the kit!!
I have a 03'Vic. Does the rack hook right up to the steering shaft? Do you know if the steering shaft has to be modified? It's funny. I seen a guy do this in a older s197 and it got me thinking if it would work in the Vics. Then this video pops up a week later lol.
I would like to know how well these racks go into a 98-11 Ranger
Just wondering why you can't run stock Mustang tie rods?
Hello maybe a little late, but would this fit a 2001 GT? And if so do i need to covert to manual brakes as well?
This unit may be too big for my car. I am looking to add to a 1965 Corvair. How do you defeat the computer I/O board? Does anyone make a rack and pinion that is purely Power On/Power off with key?
How does that 2v run with the turbo? I am thinking about putting a 78/75 .96 ar. VS racing turbo on my Vic.
Good kit but would like the option to buy just bracket to mount rack. I have all the other parts.
What did you guys do to hot up the rack? The Volvo hydro pumps use one of the small connector wires to hot to turn it on.
I can’t see the wiring on the truck without the motor.
EDIT:duh I should have finished watching…
Thank you for clearing that bit of info up!
Looking forward to getting the rack in the truck (1999 f150 swap!)
Separate question: Did you use AN lines beforehand on the hydro rack?
Which brand fittings/hose did you use on the pressure side?
Would a 2014 electric steering rack work as well?
What is the CAN bus messaging needed to activate this mustang rack? I have an EPAS rack out of F150 and it is probably similiar
Trying to activate it.
I’m doing this in a 99 f150 and was wondering if it’s different than the Volvo EPS wiring (have that on another couple cars, works really well if the stock steering is simpler to work with) where you hot up one terminal on the small plug and bam you have EPS.
It seems they have it just hooked up like that in the truck without the engine.
I don’t understand the justification of the 300+ dollar boxes if that’s all they are doing but fancier.
What happened to you guys? I really enjoyed your videos and what you have going on.
Could I install this in a 2gen lighting?
Do you have a kit for a 2014 rack?
Would this fit on an 03 mustang?
You guys know the weight difference?
Do you remove the ps pump and have to get a smaller belt just curious you didn't address what you have to do with that side of it
maybe he runs the og pump but disconnects it? not sure either. work like to see an answer
@6lik6 I ended up getting a ps delete plate that just has a pull.on it the Mustang drift guy uses them Mentioned to him
should sell it with this kit
👍👍👍
Can you tell me where you are located please?
Anyone run this with a coyote yet? I’ve got the smallest oil filter I can find and I’m still nearly touching the crown Vic rack. I wonder if this will fit?
Yes, multiple coyote swapped trucks have my kit in it. Like I said in video though, you need a remote mount oil filter setup. It does not fit with stock filter housing, no matter what filter.
@@ap67et10What steering shaft is needed to connect to the E rack??
So what are using to send can bus to make it come on or does it just go into default mode when given 12 volts?
it sounds like it's just going into some kind of limp home mode when it doesn't see a can signal.
@@eimaiakominzontanos Maybe. I have cracked the can bus for the Mustang steering racks to put them in sport mode. I'm using them in my S197 Mustang Tesla builds.
@@Roadstercycle Hi can you help me to provide a signal to put rack in sport mode??!!
@@berksonfab me too
Are you able to shed some light on this, or can I contact you via email some how?
F100 guys always have a Datsun near by..
At least 10 to 12 ugh a duga
I like it, but yikes, the bracket is twice the price of the actual e-rack. Custom hurts my feelings.
Lighting sucks on video
Background music is unnecessary and annoying when I’m trying to listen to somebody talking. Maybe I’m just a old grumpy man. I watched it muted. Looks cool, don’t know what you said. Lol
click the CC button to get subtitles
We'll give you a "Old grumpy Man" Pass 😉 There's a button on the bottom right corner of the video that's a square with "cc" in it. That will show you subtitles so you can know what we're saying without listening to anything. Thanks for watching anyway
Lost me at the Tesla BS.