How to Replace Spark Plugs 1997-2001 Lexus ES 300
Vložit
- čas přidán 6. 06. 2022
- Buy Now!
New Spark Plug Set from 1AAuto.com 1aau.to/ib/1AETK00064
This video shows you how to install new spark plugs on your 1997-2001 Lexus ES 300. Spark is one of the four required components for an internal combustion engine to run. If your spark plugs are failing, worn, or dirty, you may experience rough starts, rough idle, poor performance, or poor mileage.
This process should be similar on the following vehicles:
1997 Lexus ES300
1998 Lexus ES300
1999 Lexus ES300
2000 Lexus ES300
2001 Lexus ES300
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oaP/1AXAA00013
• 10mm Socket 1aau.to/oau/1AXAA00017
• 5mm Socket 1aau.to/oau/1AXAA00017
• 13/16 Inch Spark Plug Socket 1aau.to/oa/1AXAA00042
• 5/16 Inch Spark Plug Socket
• 5/8 Inch Spark Plug Socket
• 7/8 Inch Spark Plug Socket 1aau.to/oa/1AXAA00042
• 9/16 Inch Spark Plug Socket
• Ratchet 1aau.to/oa5/1AXAA00016
• Torque Wrench 1aau.to/oaj/1AXAA00044
• Drill
• Silicone Paste
Subscribe: / @trq
Check out our playlist:
Lexus ES300 1997-2001 3rd Generation: • Lexus ES300 1997-2001 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Next time show how you replace all three in the back without taking intake off 😂
I have a 1999 Lexus es300 im glad I do not have to take apart the manifold. thanks for the video.
Thank you! Subscribed.
I just want to say, I’m glad you said “you don’t have to take the intake manifold off”. So many tutorials show that but it’s not necessary.
I can confirm that I replaced all 6 of my spark plugs with the manifold on yesterday. I even did the back 3 with the plastic engine cover on.
Do you need a new ignition coil for all spark plugs
Can I do all 6 spark plugs with out removing the intake?
This is wrong for anyone watching this is only for 2000 & 2001 es300, the gen 3 es300 are years 97,98,99 which only have 3 coils in the front and the wire connects to the back side (1 coil per 2 cylinders)
Were the ignition coils all new
Thanks 🙏
How did it go, how long did it take and how much were the plugs
How do you replace valve stem seals? On the same car. Is there a video from you guys?
+@MGarage2816 We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ
Gosh I just took the intake off and I'll continue tomorrow 🤦
It is way too difficult to get back there without removing the intake
+UltraInstinct We appreciate the feedback. Sometimes there are multiple ways to accomplish the same repair. 1aau.to/m/Shop-TRQ