Inside A Husqvarna 562 Autotune Carburetors, An el48 To Be Exact :) Bob Takes Us Through One

Sdílet
Vložit
  • čas přidán 7. 02. 2023
  • A little time spent in the Catskills with a friends. Actually was and still am kicking around the Autotuines from Husqvarna from a Non Dealer Hobby stand point. WHAT can we do to repair or build the older Husqvarna 550's 555's and 562's. And now 572's, 585's and 592's
  • Jak na to + styl

Komentáře • 34

  • @johnclarke6647
    @johnclarke6647 Před rokem +2

    Back together and no parts left over, too🤩

  • @davidbulich1254
    @davidbulich1254 Před rokem +3

    Nice to see Bob, I miss goin to his shop, nice video

  • @mattfleming86
    @mattfleming86 Před rokem +1

    THAT was very cool.
    Soo many people treat that wholr assembly like it is some sort of forbidden fruit. Unserviceable. Don't touch it. Just replace it. Etc. etc.
    Nope. Just a carb with a few solenoids on it.

  • @TheMathiasmx13
    @TheMathiasmx13 Před rokem +2

    The zama diaphragm\gasket kit for these are part# GND-105.

  • @adammoggysawmilling5164
    @adammoggysawmilling5164 Před rokem +1

    Awesome video thanks I wont be intimidated to tear into one now

  • @bartonmd
    @bartonmd Před rokem +1

    This really is gold! I might tear into my original warrantied 550xp early edition. The thing that got it warrantied (and I bought it back from them at a much discounted rate) was a stumble off of idle, when the strato throttle bodies open. I wonder if like one of those 3 holes is partially plugged or something.

  • @trentroach975
    @trentroach975 Před 7 měsíci

    Bought a saw as a bag of bit from an auction and rebuilt it wouldn’t run followed your video and instructions fired second pull. This is great advice from you guys thanks from Australia

  • @markcdeyoung3118
    @markcdeyoung3118 Před rokem +6

    I don't know about that autotune .. but I do know it gives bad singers an advantage 😅

  • @timberslasher4899
    @timberslasher4899 Před rokem +2

    You and I have discussed this some but I have had a lot of diaphragm problems with the 550s but none with 572 or 576 or 562

  • @shawncaudill424
    @shawncaudill424 Před rokem +1

    Great video man good job and I just tore into my 465 cleaned out the carb and it fired right back up I was almost to the point of buying a new carburetor but I'm glad I didn't

  • @antoniomorgado5304
    @antoniomorgado5304 Před rokem +1

    Nice.

  • @Bobcat325
    @Bobcat325 Před rokem +1

    👍

  • @duck-n-cover477
    @duck-n-cover477 Před 10 měsíci +1

    Wishing you a pleasant retirement

  • @duvshak
    @duvshak Před 11 měsíci

    Aint scared of autotune now that i see it but the start a screw then turn must be apring that has to be enagged keep it on thw outside?

  • @tomsteinmetz1215
    @tomsteinmetz1215 Před rokem +1

    Looks like Walt can pull the bigger load ?

  • @fearlyenrage
    @fearlyenrage Před 10 měsíci

    Hi Walt hope you are well, and your friend too.
    Question is it possible to exchange the autotune carba against an mechanical carburator from the build up?
    And when yes wich carb model could be used?
    I would be in the posetion of a 3d Printer and could design some kind of intake but the autotune makes a 90° bend downwards what sems to be somewhat of a hurdle for a mechanical carb atm. Thy

    • @afleetcommand
      @afleetcommand  Před 10 měsíci +1

      Yup. But what u loose is more than what you gain. Best solution? Buy a 585

  • @TheMathiasmx13
    @TheMathiasmx13 Před rokem +1

    Those diaphragms should be removed as I've seen fines packed underneath them in the caps. And for reference all of them are shot on this carb. They should all be flat like a piece of paper with no bulging.

  • @CrimeVid
    @CrimeVid Před rokem +1

    The only thing I know about carburettors is you have to take them apart and clean them, no point stressing about it, you have to ! Maybe my generation (and Walt’s) are more used to the things !

  • @nateolmsted899
    @nateolmsted899 Před rokem

    Did Bob sell his shop or just close it?

    • @afleetcommand
      @afleetcommand  Před rokem +2

      Close. How do you "sell" a store like that? Can sell the inventory...but the store and the relationship with the customers is....Bob

    • @robertconyea
      @robertconyea Před rokem +2

      She's closed Nate. We didn't talk to anyone remotely capable or qualified to take over the biz. Fortunate for us that we could just retire without that affecting our timetable. All we want is a tenet in the space. And Walt is correct, a business that size is the people in it, not the sign out front.