HorizonHobby.com How-To - Service Your Losi 5IVE-T Shocks
Vložit
- čas přidán 25. 08. 2024
- Please click "See More" for links and more information on the Losi 5IVE-T
A big truck needs a big shock and the Losi® 5IVE-T™ truck has some of the biggest shocks we've ever seen. Thanks to their large diameter, big-bore design, they help provide the 5IVE-T with a super-plush ride, absorbing anything in its path. Keeping your shocks in prime working condition requires occasional maintenance and rebuilding, which is made easier thanks to the Losi 5IVE-T Shock Rebuild and Hardware Set (LOSB2856, Hyperlink text). This set includes virtually everything you'll need to rebuild your shocks quickly and easily. The only extra items required will be your favorite Losi shock oil, some Losi Nitrotec™ Spray Cleaner, a brush, and the tools included with your 5IVE-T. In this tutorial we will show you:
• The proper steps for removing the shocks from your vehicle
• How to clean the exterior of your shock bodies
• Proper disassembly of your shocks
• How to replace the o-ring seals in the bottom of your shocks
• How to properly refill and bleed your shocks
• How to replace the shock boot
• Final shock reassembly
• Reinstallation on your Losi 5IVE-T
In addition to these steps above, we'll also show you how to simply top off your shock fluid levels, proper bleeding and show you a tip for how to make installing and removing your lower spring perch a little easier. In addition to our shock tutorial, make sure you check out the rest of our expansive tutorials on how to best maintain the performance of your Losi 5IVE-T.
In addition to these steps here, you can also check out our un-boxing, first initial setup and post-run maintenance tutorials we have put together on the Losi 5IVE-T. You can view that by visiting www.horizonhobb....
Questions? Comments? Feel free to e-mail us at Editors@HorizonRC.com
If you like our videos check out our podcast, the R/Cast, Thursdays
www.horizonhobb...
Horizon Hobby is now on Facebook! Visit us at
/ 55340718934
Follow HorizonHobby.com on Twitter at / horizon_hobby
This is good to know. I've read that you have to take the shocks apart right out of the box because the screw holding the piston on the shaft come loose from the factory. You have to put loctite on the screw.
@RCbuilder247 Yes, 30WT all-around. However you can always experiment with different dampening front and rear to change the handling characteristics. I typically run 2.5-5wt heavier front than rear.
good video very imformatives i just got the orange spring and considering to use 35 shocks oil . i'm a bashher and my original shocks are done with . thanks for the video very useful
Thank you for this video, I'm getting a 5t tomorrow so I will be looking at your vids :-D.
Great job Gary,even though i'm into my planes as you know,i still found this interesting to watch and i'm sure it will help out quite a few RC car boys.
Those shocks seem so huge especialy since I spent about an hour last night rebuilding shocks for my Mini-T.
The 5IVE-T shock bore is 24mm.
Very informative video. Thank you guys!
Can you do a video on the 2.0 shocks?
are they any different?
@@modex20 Yes. The 1.0 has bladders. The 2.0 doesn't. Has bleeder caps.
Im quite new and havent had any experience with bleeder caps. Im sure I can figure it out but I wanna make sure I do it right
Nice job!!!! Enjoyed
Nice
Nice info.. in the video you identify a tip about cutting a notch, but it skips, rather than showing where you would actually cut, can you explain?
Nice Job Gary! Shock rebuilding isnt easy for me. But you have helped me alot on rebuilding them. Those shocks are Huge, Do you use the same wt. for the front? Thanks for the vid.
how many oil each shock can hold
Ok thanks
what tools do i need to upgrade the bore for the 26cc engine to a 29cc bore
what if my shock doesn't rebound all the way when compressed after re-filling? mine only come back out a little.
Did losi change the the rebuild kit for the shocks? I noticed losi has 2 different shock kits.
would tightening the cap while the shock is fully extended not give you full length preload ? I was unsure when I rebuilt my 5s shocks and have been trying different ways what's the info on the preload end of this thanks
For the dbxle what shock shaft goes in front, the shorter one or the longer one?
I cant find those bladders. Any idea what I could do ? Or do I have to upgrade to the 2.0 shock caps.? Any idea would be great thanks
What is the millimeters in the shock big bore
What de density of the silicon fluid!?
what is the length of the shocks in full extension and diameter of the springs and width of the rod ends ( a-arms end) in mm? thank you
Would one 2.oz silicone oil be enough for all four shocks also?
No, you'll need more but that's why there's a 4oz bottle too. TLR74023 is the P/N
Horizon Hobby how many 4oz bottles for all 4 shocks?
I don't understand why but I found shaved metal on the inside of my shocks what is that about
Yup me too!
can you do a video on how to clean it using water
No, because you do NOT want to use water to clean this! You'll want to use proper degreasers and cleaners, such as Dynamite Nitro Force or Magnum Force to clean the truck.
can i put degreaser on the engine
nothing happens to the electronics when i put degreaser on them
guna chowdary Yes you can use Magnum Force or Nitro Force on the engine. Regarding the electronics what are you needing to clean, just dirt and mud off of them? Use a firm bristled brush to clean those off.
What is the stock shock oil wt?
30wt
Music is louder than the speech, makes listening to instruction difficult. Great video otherwise!
Second
why don't you go ahead and go ahead and go ahead and go ahead and go ahead and remove that phrase from your vocabulary. It its really not necessary, the sentences work without it.