A Major Malfunction with WM’s Brand New Mack
Vložit
- čas přidán 29. 08. 2024
- Disclaimer: This video is for entertainment purposes only. NEVER UNDER ANY CIRCUMSTANCES SHOULD MY VIDEOS BE USED AGAINST DRIVERS.
TO THE PEOPLE AT WM THIS VIDEO IS FOR ENTERTAINMENT PURPOSES ONLY. DO NOT USE MY VIDEO AGAINST THE DRIVER AT ANY POINT.
Well, here we have what I think to be a once in a lifetime opportunity. Back in April or May, I was out filming 106292 in the morning and everything was normal. Later on in the afternoon around 4pm, I was wondering why he was so late. I ended up finding him right as it started to rain. According to the driver, a sensor had broken around 10am and was causing the truck not to grip all the way. It wasn’t a problem until it started raining because the bins had become slippery. And seen in the video is the result. The driver could have gone back to get a spare but chose to keep the truck seeing that he only had about 200 stops left.
Also, this is my 1k sub special. I want to thank everyone who subscribed to my channel. Everyone no matter when you subscribed I truly thank you for supporting my channel. Back in 2017 I never thought that I would be to this point and actually have 1k subs but when COVID happened everything blew up on my channel. I truly mean it thanks for subscribing to my channel and look forward to may more videos to come.
That driver did a good job of riding it out and finishing his route
That looked tough
Nice job
Yes he fought through it
If I was the driver I would say screw it I'm getting a new truck byee
@@TruckMaster642 This truck gets a seal of approval for the most amount of fails on a route. XD
I inn in my
Not even! Did a horrible job
I would have cried and took that truck back to shop for an exchange lol
This guy is a menace! Idk why the poor trash cans continue to subject themselves to such treatment! I blame the recycle bins!
good on him for carrying on, I know for a fact days like that are frustrating
The ASL's are problematic due to the many moving parts and it sucks when their not working properly, I had two brand new ASL's one was an 2017 Mack/Heil with the rapid rail arm, other was an 2020 Mack/EZ Pack also with the rapid rail arm both arms gave problems. But I'm glad this one was repaired.
I was a cnc machine operator at dana/hyco for 11 yrs we built cylinders for garbage beds heil, ez pak, leech lot of other dump druck beds crysteel, heil tishamingo in MS heil garbage beds are made in ft payne alabama
Our mechanics at wm In nor cal, had our arms and grabbers tuned perfectly. Same arm as this truck . He's trying to grab the smaller cans near the top so it's slightly wider because the grabbers won't close all the way , won't squeeze right .
That's a horrible way to work ,look at all the down time cleaning up and pulling cans out of the hopper ? When you climb in there , or even climb up on the truck AT ALL , you have to tag out lock out . Every time .
And thats why i dont work for WM anymore 15 years with them. Now if you even breathe wrong they will shit can you
My algorithm finally recommended something good
Great. Glad it’s already going through the algorithm. This was a the most interesting video I’ve ever filmed
Same here.
I've had plenty of days like this. Lately actually I've had a week like this.
Wow that must suck
@@TruckMaster642 I recently took my old truck back after it's been a spare for two months or more. It's a Heil half pack odyssey automated front loader. The internal sensor in the front fork cylinder has gone bad. Once the hydraulics warm up the sensor fails and the Curotto bucket won't dump or undump properly. I have to turn off the auto dump feature and run it like a regular front loader. It wasn't designed to be ran like that so it's very problematic. I had a brand new Heil Python but we are extremely understaffed from Covid19 right now so all yardwaste trucks won't be running until probably fall and we have to pick up the yardwaste as we pick up the trash. In the Python that wasn't the easiest thing to do so I gave that truck back and took my old Curotto Can truck back. The guy who's been driving it gladly gave it back because he doesn't have the skillset to run that truck when the sensor fails nor did he know why it wasn't working so he takes the truck back in and gets another truck every day. I'll make it work until a new cylinder with a good internal sensor comes in.
Same well almost
It seems that the rain and the can design are both exposing a major weakness in this type of trash collection strategy.
Nope, the rain doesn't have anything to do with bins being dropped it's due to the claw not gripping the bins at the right strength
The claw is broken, that is why there are so many issues.
11:50 that is skills right there 😂😂
I rewatch this video every so often. Makes me laugh every single time
@@TruckMaster642 yea and it's funny to when the truck threw the can when it was coming down
@@TruckMaster642 and the thumbnail when I saw it I was like I know this is going to be good
The can did a backflip lol.
@@TruckMaster642 Sharing this with my friend he is going to be laughing so hard when he sees it.
What a caring & professional company, taking over the industry like this is easy if we dont do our jobs at all
I can immediately see the problem,The claw doesn't have rubber grips on it,It's WM and the automizers where they leave the claws with out rubber grips.
No the problem was that one of the sensors broke the truck was brand new. The sensor wasn’t allowing the claw to grip the bins.
@@TruckMaster642 So after a certain point of closing the claw just stops after that point?
Awesome video! This is probably the most entertaining garbage video I have ever seen. I’ve never seen a truck screw up that bad before. I bet the driver had a long day. It was really cool to watch all the bins go flying. Awesome video, and congrats on 1000 subscribers, keep up the awesome videos!
Andrew The Trash Kid Thanks, I’m glad you enjoyed the video
We all heard of butterfingers but now get ready for buttergrippers! Seriously though this rig needs to hit the shop ASAP because retrieving a hoppered cart at almost every stop gets old fast.
Yes. For sure. The griper sensor broke which was the problem
THE BEST VIDEO I HAVE EVER SEEN!!!! 5:20 AND 13:19 IS THE HIGHLIGHT OF PASSIVE AGGRESSION!!!!! I KNOW HE WAS P-O'ED FROM THE CANS FALLING IN!!! THANK YOU FOR MAKING ME HURT LAUGHING!!!!!!
It looks like something you’d see on family guy.
Like it really does. They should make an episode about this
I have ran one for 20 years and haven’t dropped that many in the hopper in The whole 20 years. He also doesn’t have the rubber on his forks that keep it from slipping.
The problem was a sensor broke
Really unfortunately that my guy had a really bad day. Hopering cans here and there and sometimes flinging them in the air. What is shocking is to see it's new yet has these fails. Nothing against wm it's just, Why? Shout out to you for trying to help the guy out. I laughed hard seeing the carts fling out or bring hoppered and im sure the driver did too just that he had it worst. They should have put the helper hand on the route to help out.
So What happened was one of the sensors on the arm broke and he told me that all day it was fine but it was in combination with the rain that made the carts fall in. To be honest I don’t know why it broke and am sure that it’s not the drivers fault.
it's the truck
@@Amrep335 We know. I read the descriptions.
Stuff breaks, picking up trash is hard on equipment and no matter how much money you spend on equipment, how well they build it and how hard you focus on not breaking it it will always break.
It does what it’s made for! It throws the trash away, I’d even say it does more than what it’s supposed to.
5:25 😂😂 Hitting the bush got me
Usually WM isn't allowed to retrieve hopper carts but I think if he followed that policy the whole route would need a rollout haha
At this yard they are allowed to get carts out of the hopper
HE ALWAYS TAKES THOSE BINS WRONG, HAS TO PACK THEM MUCH LOWER THROUGH THEY FALL INTO THE CAR. GREETINGS FROM THE NETHERLANDS
Somethings wrong with the grabber for sure. They're supposed to tighten up as the bin lifts. Poor guy.
18:24
I’ve worked a truck like that… unfortunately some of them are real lemons no matter how new they are. Ends up being pretty expensive replacing all those carts.
This is past a malfunction, this truck gives the word malfunction a bad name
Agreed
It's more of Waste Management Leaving some trucks without grips on the sidewinders mostly.
FloofyBirb These are automizers but yes most likely
@@MendocinoRefuseTrucks Oh,Sorry. My DPW truck is a sidewinder XTR,So as soon as I see that arm I get it confused.
FloofyBirb Lol i used to be the same way, always got Sidewinders and automizers confused
God bless the person who helped them
Ahh yes, 20 minutes of our content! Lol
Nice video my main dude, entertaining to see a wm truck keep hoppering and the claws throwing carts out of grip, that sucks that’s censor went wrong, would be cool to see a python do this haha, did those people around the beginning say anything to you? Just wish they didn’t buy sterlings might as well buy icons since there much better or even ottos
No the people at the beginning were cool and I wish the bought rehrigs instead of cascades. These ones keep breaking.
Truck Master642 yeah I bet even universals or nb or even egs would work maybe even nv or what ever there called would work
5:29 SLAM DUNKIN CANS
that part was totaly crazy lol this is the worst malfonshon ever
He should’ve called the supervisor or mechanic to look at the problem so he’s not behind on route. Or send another truck like a python to do the route
He called a few people to help him and non of them finished. I think even with this truck problem he might have finished before them.
Truck Master642 oh ok
just add a red circle over that cart, and this thumbnail will be perfect.
Lol that’s a great idea
@@TruckMaster642 why do the bins keep
faling in
@@Local_Gamer_kid read desc
Just so were clear, we (MACK) only build the truck and frame, then ship to a "BODY SHOP" the customer chooses to have that company install Dump,Flatbed,Roll-off,Tri-axle,crane,cement pump w/e they need.
Yea I got that but sounds better saying new Mack than Labries.
Definitely not a Mack problem here
Is he getting in the truck and bringing out the trash cans that he is dropping in ? Funny video !
Some of republics older rapid rails over here will slowly ungrip the bin once it is over the hopper for some reason as well
Operator. Take it easy on them brakes lol😂
Looks like the gripper is out of adjustment. Someone will need to take a few minutes to troubleshoot and correct. It's definitely not suppose to do that.
Yes. The driver showed me what broke it was a sensor that had snapped around 10am. Sucks that he had to deal with it and hoper all of these carts. Luckily they took it back to Mack and it was fixed and inspected in under 3 days
@@TruckMaster642 mack sabotaged them
I would be interested to know who likes this video, what would they say if their bin disappeared after a garbage collection and they had to buy another bin. This is called willful and negligent work, another employer would deduct from his wages the damage he caused!!!
Shut up.
They really need either a new type of trashcan that is easy to grip or a better claw.
i think a few people who are missing cans now know where they went lol
lol
They need to redesign the claws on them trash cans or make the trash can bigger
What was wrong with the truck??
A sensor snapped
Looks like arm mid height limit switch is out of adjustment. Keeping a finger on the gripper close button helps if that happens
That’s a great idea and it actually worked towards the end of the route when the driver thought of that.
WHAT IS YOUR MAJOR MALFINCTION!!??? Also great video
Hamtrak_p42dc Amtrak the malfunction is the grip
Truck Master642 I know I just wanted to say tat
Truck Master642 I still can’t see why they could not send out a replacement truck
@@hamtrak_p42dcamtrak67 the driver just didn't want a replacement he only had an hour left. So they didn't send one.
@@Joshuasfunandgames cool
Aint no way, I would have called dispatch so fast. I’m coming back and I need a new truck or an immediate adjustment to the arms.
Dude that thing is the Rankor of garbage trucks! 🤣😂🤣. I think it ate like 30 whole cans!
Yea it was funny to watch but a real pain for the driver
I don't think its the truck or the driver. Those look like cheap as* containers. Mine are heavy duty and would never squeeze like that.
Man that truck is a complete piece of junk it’s sad that these newer units are not how they used to be very entertaining though glad you were able to film this
Thanks for the comment. For reference this was all over one small sensor that caused all of these problems. They send the truck back to Mack and it’s fixed now
Goes to show how these new Mack trucks are absolutely junk
@@newmexicorefuseentertainme9406 it has nothing to do with Mack. It’s a NW Sidewinder body with a bad gripper set up
It is obvious that the bucket grip is quite loose & not working properly. The rubbis truck should be sent to the service centre to have the bucket grip system repaired, adjusted and inspected thoroughly for any faulty or loose parts before the rubbish truck can be used again.
Yea. It was fixed the next week when the truck was taken out of service
Ok ya pick on the go green B's wm thumbs up
I think this was happening because the driver was grabbing the top of the bins so when he dumped it the can slipped and then the grabbers grip was to big causing the bin to fall into hopper. I also think the rain had something to do with the grip. You can also see that the grabbers had a good grip on the can when he grabbed the middle part of the can.
Well from what the driver told me a gripper sensor broke causing it not to close all the way but the rain definitely didn't help
@@TruckMaster642 oh, that makes sense maybe that is why he was grabbing the cans on the top half of the bin. Oh also I forgot to say that this was a great video and was really funny!
That is for sure
The malfunction is between the front seat and the steering wheel.
Not really
@@fuchs7112 actually it was, the driver apparently was not paying attention to what was happening.
That truck eaten 13 bins The truck must’ve been full on with bins more than there was rubbish.
I could be wrong but looks like one of the operators are grabbing the tote extremely high and the hydraulic claw is not securing it properly.
Amazing nice video dude.
Thanks
Today the garbage truck came to my house it was Pratt Trucking like always sometimes other companies do it
Nice
Truck Master642 yup I love them as a garbage company
That’s why I don’t like these side loader trucks. I think it’s a terrible design. Makin the driver do more than what he has to.
What does that garbage truck has problems because the problem that it has that I’m seeing the clot is like going up when I kind of see the driver put the claw up then just slips through and goes into the garbage truck
61 FAILS?!?!!! 🤯🤯🤯🤯
💩💩💩💩😢
Warum fallen dem ständig die Tonnen rein? Ist es ein neuer Fahrer oder ist der LKW kaputt?
61 Fails
Nice Viedeo
Thanks
Why he holding it on the top?
That was dumb
@@gamermulaso the can would not fall in Bec the cans were slipping
Did he get the bins out?
Yes. After doing the lock out tag out method
Ist's the silliest driver ever! Hahahaaa
Waste Management’s most careless yard
I see the problem the claw is not coming down low enough to pick up the trash can in the middle it's gravity at the top and that's what it keeps throwing them in the trash can all the trash truck or throwing it on the ground
i would say its not just the truck but partly fault of the driver gripping the can right at the top seems very odd
He did that because the claw wouldn’t grip and it gave him more time to pull the bin down before the bin fell in.
Ya he obviously had more of a chance of holding the toter up.where it is wider which actually made sense. Kudos to WM driver for doing what he can with what he had to work with.
6:39 - 7:10 The bin refused the whole time
Driver + new way system problem? We have a brand new new way and so far hasn’t giving us that problem. Maybe it’s made for big carts?
This was actually just a simple sensor problem. Crazy how such a little thing can cause such a huge problem
Bruh I felt so bad for the driver, legend for helping him out though! Just dropped you a sub! Hopefully you get to 4k soon!!
Needs bigger bins for that claw.
Grip it where you’re supposed to and maybe not have that problem. Operator error.
夾東西的那裡壞掉了
Did he get the bins back out or was it a loss and the had to be replaced?
Yes he got them back
Wouldn't it have been cheaper and easier for the driver to ring the depot and get them to either send a mechanic out to fix it, or bring another cart and swap them. Surely they must have 1 at least sitting in the yard spare, especially with this Covid thing going on at the moment that cart is eating bins nearly faster than they can produce them.
Well. The driver decided to just finish up the route only had an hour left and by the time he got a spare it would have taken longer. Also for the carts they were all retrieved, it just took a while
@@TruckMaster642 Ah I see, (should've read all your top bit). So with the bins it was a case of - here's your bin back, it's a different shape, - (new style "crusher tested"), - doesn't have any wheels, and no lid, - other than that you should be able to get a bag or two in. I liked the lorry at the beginning - now that's what we in the UK call - 'A Truck' - very nice indeed, operators name suited it as well. Was the 'bar device' for some form of full length sheeting the load, or for lifting things on and off. Oh yes I forgot to say you have a 'new subscriber' as well.
5:29 lol 🤣🤣🤣🤣🤣💀💀💀💀
Don't blame Mack Trucks. This is a shitty body builder issue.
Not saying it’s Mack just used it as part of the titles definitely a Labrie problem
How much bins did the garbage truck eat? JUST HOW-THAT TRUCK MUST HAVE MORE BINS TNEN RUBBISH
Why would you continue to deal with that all day? Take the truck in, or have the service truck come change the proximity sensor if you know that’s the problem.
Honestly i don’t know. It was only the last hour and about 1in 4 carts fell in so it wasn’t as bad a the video makes it look
This truck is certainly screwed up, usually labries are supposed to squeez the cart a lot. If I was the driver, I would have called the mechanic and ask for him to fix the truck lol
The driver told me that one of the sensors broke and it was causing the arm to be messed up
Wonder if the cans that get left in and not left get reportd or they get new cans to replace any that dont stay in arm any.
I can confirm they were all taken out
13:04
Can i ask why the driver didnt down the truck for not operating properly? Whats the point of continuously dumping cans in hopper? I assume the driver had to try and remove them no?
Idk probably cuz he ily had an hour of the route left and only 1 out of 5 carts fell . The video is just the fails. Probably quick just to deal with the problem
people tend to screw up more than normal when being filmed 😂😂😂😂
lol
What state was this filmed in?
This is what will happen if i get behind the wheel of a garbage truck
that truck don't know what it's job is
Single use garbage bins lmfao
Gibt es nicht einen größeren Müllwagen mit dem man diesen Müllwagen entsorgen kann? Das ist ja unglaublich!
What does it say on the side of the box?
Niiiiiiiiiiiiiiiiiiiiice
The Sanitation Truck that Couldn’t.
Garbage Trucks of TN yup
the annual waste management idgaf day.
😂😂🤣
Every 4th trash can is getting dumped in the truck hes getting half of the trash in half of the trash out
9:15 dead
Did he actually get these bins out or are they just gonna do a whole nother roll our cause of this guy? 😂
No he had to get all of the carts out
It was a very bad day for him
idc how many stops i have left im gong to get a spare
ЗАШЕМ Я ЭТО СМОТРЮ БЛ...ТЬ
ШЕЩЕНСКИ
лол
nice video the house at 3:40 is that the house that put sawl dust in thier recycle bin
Yes it is
oh sawl dust is not recyable
The arm it’s grabbing the cans to high. It supposed to grab it from the middle of the can no the top
Well the sensor broke so this was the best way to dump them at the time
Wait; it’s a gag right? This guy is making fun of garbage man right?
No? This is how he does his job???
idk if the truck is having a bad day or what
A sensor broke
This garbage truck driver is baaaad