PILE FOUNDATION AS PER IS:2911-1-1-2010
Vložit
- čas přidán 5. 09. 2024
- ALL THE DESIGN CONSIDERATIONS OF A PILED FOUNDATION HAS BEEN DISCUSSED IN THIS VIDEO. THE IMPORTANT CODAL PROVISIONS OF IS:2911-PART1-SEC1-2010 REGARDING PILE CAP AND PILE DESIGN HAS BEEN EXPLAINED. PLEASE REFER THE BELOW LINK FOR INTRODUCTION ON PILE FOUNDATION AND ALSO A PILE DESIGN PROBLEM.
1. INTRODUCTION ON PILE FOUNDATION:
• INTRODUCTION ON PILE F...
2. RCC PILE DESIGN
• Basic Design of RCC Pile
IS-2911-1-1-2010 DOWNLOAD LINK
drive.google.c...
Excellent explanation.. Thank u so much. Keep up the good work..
Great work, but we want some more things like - 1.how cutting length and socketing of pile is decided.2 how pile calculation is done in sand and clay for circular pile?
❤Excellent Sir
Best explanation of pile foundation
Thank you 😊
I'm doing pile foundation in kolkata metro right now
Superb... please also explain same about pile load test , routine load and Initial load
Good Job. Nicely explained
very use full thank you.
What is the tolerance allowed for
1. ROW to ROW pitch distance
2. Vertical distance
3. Clear cover
Very good narration what us rhe specification of pile load test
Is it necessary to conduct static and dynamic load test for pile load test
Thank you sir
Sir ,
These are the details for a protection wall along river bank
Existing ground level - 12.600
River bed level - 7.130
Ground water table located at - 3.00mts below ground level
What should be the pile cut off level ..?
Lovely video
How design single pile with cap
How to find depth of pile....?
What is the load bearing capacity of 1 fit dia pile the depth of file is 12 feet
Sir also upload pile cap design
Nice
sir , Edge distance should be minimum d or 150mm? please clarify. also please help me how will we decide on the basis of soil report and n values and sbc values and ground water table, what type of foundation is required. if it is pile, what length to give?
Pile length should be sufficient enough to carry the vertical pile capacity and reinforcement of the pile should be evaluated on the basis of Lateral Load on the Pile.
if uplift is present what shall we do?
Why permanent liners are used for bored cast in situ pile foundation.. What are criteria for that? Mainly water and soil?
permanent liner are provided where u have to excavate the pile for certain depth and for smooth finish
When total soil is loose or soft condition in such case Permanent liners used and liner thickness should be min 6 mm
What ia the settelment criteria for Pile foundation
What is the criteria for pile liners design