In this Video I Go Over Car Alarm and Remote Start Wiring In Great Detail. Be sure to also watch my 5 part series / playlist on the installation job from start to finish.
i have done several alarms, and i think the lock relays might be a video worth doing, some dont actually understand how those relays actually work, and took me time to realize they can make a neg a postive and vice versa :)
Love the tutorial. You are an excellent installer. Dud you ever do a video on how to safely install remote start on a manual transmission. I have a viper 5701 in a dodge stratus 2dr sxt but the remote start was never hooked up because it's a manual transmission and I was told it was to dangerous. Thanks
1- yes, for an app guide use directed dot com 2-factory disarm is factory security integration at its simplest. its necessary (if the car is so equipped) so that the horn doesn't drive you crazy when using your new remotes instead of the originals. for the wire info, watch the free tech sheet video I just uploaded, all the info you need and more is there and all free
The videos are great. I like the way you keep the wires together. How do you feel about wire looms? Probably would make the install look better. But would make it harder to get at the wires though and make it harder for a car thief as well. I'm interested in how you go about mounting the car alarm's antenna in the car? Do you have to remove the A pillar trim piece? How do you route the car alarm antenna from the windshield behind the rear view mirror to the car alarm?
I will be honest I didnt buy my remote start from you guys but its because I didnt know about you till I figured out how much of headache this was going to be and did some research and ran across this. I would be willing to pay you to pick your brain about installing this Avital 5303 on my 1998 toyota tacoma. Just let me know if your interested and best way to communicate.
Great video! I saw this tutorial, and in it you hold up a micro-toggle switch and say that it can be used for a little trick-of-the-trade solution for installing a automatic trans remote start system into a manual trans car. Did you ever get around to making the tutorial on this? (With all of the videos, and the business, and family, I know that your time is stretched pretty thin, but the switch idea has intrigued me very much)
First. Thank you for taking the time to make this video. Its pretty detailed. I have a 2011 Crown vic. It being a P7B It is pretty basic. Power W/L and seat. no factory alarm at all. I also have this exact alarm. I feel cofident I can install with some patients.lol. the things that I need to know and can probaly google but wanted to ask you. Door locks i would like to use the 4x unlock feature and flash the head lights as the alarm trigger lock/unlock/sounding. im just tring to figure out door lock and light polarity would you happen to know? My wife wants one on here old saab 95 but i have read its a nightmare and no pro will even touch becouse of the TWICE security. Even though i do have a spare key i can leave tie wrapped near the ignition for singnal. thank again so appricative of this video
i used this video 11 years ago and its still so helpfull thanks for keeping these videos online!!!
Quick Table of Contents / Timeline to the video (Reference Only):
i have done several alarms, and i think the lock relays might be a video worth doing, some dont actually understand how those relays actually work, and took me time to realize they can make a neg a postive and vice versa :)
Best alarm description I've seen helped out a lot was able to finished my install in minutes thanks for the video
Great video once again. You make everything so easy to understand. Way better than jus lookin at the wiring diagram. Thanks again.
Great videos... I actually brought that exact same alarm for my first car alam so this video is extra usefull thanks alot
Thank you very much!
Man ur ageing. Watched videos of ur's yesterday & today. Seeing the older you reminded me that "hey he didn't look like that from what I remember" .
Love the tutorial. You are an excellent installer. Dud you ever do a video on how to safely install remote start on a manual transmission. I have a viper 5701 in a dodge stratus 2dr sxt but the remote start was never hooked up because it's a manual transmission and I was told it was to dangerous. Thanks
1- yes, for an app guide use directed dot com
2-factory disarm is factory security integration at its simplest. its necessary (if the car is so equipped) so that the horn doesn't drive you crazy when using your new remotes instead of the originals. for the wire info, watch the free tech sheet video I just uploaded, all the info you need and more is there and all free
pin 87a on what relay, is that a regular relay or an onboard relay in the alarm itslef?
The videos are great. I like the way you keep the wires together. How do you feel about wire looms? Probably would make the install look better. But would make it harder to get at the wires though and make it harder for a car thief as well. I'm interested in how you go about mounting the car alarm's antenna in the car? Do you have to remove the A pillar trim piece? How do you route the car alarm antenna from the windshield behind the rear view mirror to the car alarm?
what model alarm are you working with?
I will be honest I didnt buy my remote start from you guys but its because I didnt know about you till I figured out how much of headache this was going to be and did some research and ran across this. I would be willing to pay you to pick your brain about installing this Avital 5303 on my 1998 toyota tacoma. Just let me know if your interested and best way to communicate.
You guys rock!
Great coverage! but I did you cover the main ignition 10 pin harness?
Great video! I saw this tutorial, and in it you hold up a micro-toggle switch and say that it can be used for a little trick-of-the-trade solution for installing a automatic trans remote start system into a manual trans car. Did you ever get around to making the tutorial on this? (With all of the videos, and the business, and family, I know that your time is stretched pretty thin, but the switch idea has intrigued me very much)
No, but if youre looking to do that, look at compustar's drone and the fortin bypass, theyre plug and play and waaaaay better that DEI
First. Thank you for taking the time to make this video. Its pretty detailed. I have a 2011 Crown vic. It being a P7B It is pretty basic. Power W/L and seat. no factory alarm at all. I also have this exact alarm. I feel cofident I can install with some patients.lol. the things that I need to know and can probaly google but wanted to ask you. Door locks i would like to use the 4x unlock feature and flash the head lights as the alarm trigger lock/unlock/sounding. im just tring to figure out door lock and light polarity would you happen to know? My wife wants one on here old saab 95 but i have read its a nightmare and no pro will even touch becouse of the TWICE security. Even though i do have a spare key i can leave tie wrapped near the ignition for singnal. thank again so appricative of this video
No problem, Theyre easy to me, Whatcha need?