Right with you buddy. My all black P9 with night sights is great. The barrel at 3.5 inch if great. I can wrap all my fingers on the grip. Checks all the boxes.
Thanks for watching & commenting. I know the Kahr “P” series are the premium models. The pistols I have are the Value series so they have some rough machining marks, which can be fixed with a dremel tool, buffing wheel, & polishing compound.
I have had two Kahrs for some years now, CM9 and CW380. The 9 has always functioned perfectly, the 380 took a little fiddling with at first. Get a +1 magazine spring and follower from MagGuts for each for a slight capacity increase, and night sights are nice, too. I think that the long, buttery smooth trigger pull, like a fine revolver, will really work to your advantage, if you ever felt the need to draw it, because you shouldn't have a negligent discharge, you have to be deliberate to pull through the stroke. I think it makes me a better shot, rather than a short, light trigger pull. Practice and dry fire.
Ive been carrying a kahr pm9 for 20 years now. Several thousands of rounds run through it. I was going to get the iwi masada slim as a larger newer ccw. But kahr just released $500 new optic ready double stack pistol coming june 2024 that can take sig p365 and hellcat mags without an adapter. So I'll probably be waiting till june for that . But I will always have my old pm9 as a back or summer pocket carry.
I've owned three CM9'S since 2011. Flawless function and slightly smaller footprint then my 365. However, not the edc for those who feel the need for 15 plus rounds.
I've had a CM9 for a while. It benefits greatly with a reduced trigger spring from M*Carbo and a grip sleeve. Also got a +1 plate from Galloway Precision. The trigger isn't my favorite but once used to it plenty accurate for me.
You should try the Diamondback DB9 Gen4. it’s on sale from Palmetto Arms for $200, I’ve used mine for 3 years. It’s painful to shoot but surprisingly accurate.
I have heard of them, seen them in stores but never fired one. If I knew someone that had one I would give it a try. If you are ever in Lower Alabama let me know and bring it over to the range.
Hi, can you elaborate on the CW380 carbon fiber finish already wearing off when you opened it? Was it just flaking off? I have one on the way and this is the first report I've heard of the finish having any kind of issues so now I'm concerned that there are durability issues. Did Kahr offer to refinish it with no questions asked? I'm assuming you had to send it in to them - did they cover all associated costs?
Yes, the carbon fiber finish was flaking off when I took the gun out of the box. When I contacted Customer Service they told me I could have it re-finished and choose any pattern they offer. I got the plain black finish. Out of the box this pistol looked more like a factory reject than a new firearm. Also this CW380 had more un finished machining marks on the barrel and slide than my 1st Kahr CW380 Pistol. I did have to pay $ to return the gun for refinishing. While I returned it I paid for the Trijicon 3 dot night sights to be installed by the factory. While it was being completed I was contacted by customer service to ask if I would accept a $50 discount because they accidentally scratched the slide while installing the new sights. I tried to counter their offer with saying if I they would install the new sights at cost I would agree to accepting the damaged slide. They turned me down. I got the new night sights installed on a new slide. Other than that hiccup I was satisfied with the customer service interaction. I will tell you it did take a good 200 rounds before this thing would run reliably. And a couple of hours running a Dremel tool, polishing wheel and buffing compound.
Thanks for the prompt response. Yikes, that all sounds.... not good and shame on Kahr. I knew I was taking a chance with ordering it but I'll be all in less than $250 and I've been eyeing one for months now so I decided to take the chance. I went with the Carbon Fiber instead of the all black cerakote for the same price because I liked the look and the Carbon Fiber models are supposed to come with the upgraded steel 3 dot sights. Do you recall if it was just a standard black frame under the carbon fiber finish? Others seem to infer that the grip texture is more aggressive with the carbon fiber frames@@Luv2Huvr
@@shane6154 I believe it’s a standard black polymer frame that’s hydro dipped. I don’t recall the texture of the grip being any different. I just liked the pattern design so I could quickly tell the two identical models apart. I do own a HiPoint C9 that has the dipped digital desert camo pattern and that thing is a champ. Never had a problem with it. As much as people rag on those it’s built like a brick. And it’s reliable.
I had a CM9 and really miss it ..........great pocket gun but lose mags in your shorts , (may) drop rounds from mags if loose in pockets...............so you know !!!
My Kahr CM-40 trigger failed and now I can't pull the slide off. I took the side plate off but did not see any way to make it work. Any ideas besides mailing it to Kahr?
@@Luv2Huvr It’s there, just does not release the firing pin. Can not disassemble. Even the gun shop tried. I have to call Kahr about it unless there’s a trick. The gun only had around 20 rounds fired. I have it since new. Just in the drawer all those years.
Definitely call them Monday morning. If they can’t help over the phone you can FedEx it to them. I had to do that with one of my CW380s. They refinished it under warranty for me.
@@Luv2Huvr Will do but the C series are warrantied for one year only. I won't make that mistake again. Adding Kahr to Century Arms as mfrs I would not buy from again.
@Luv2Huvr I stripped the small screw that holds in that spring, which screws straight into polymer. Not that I would even call it a spring. I sent it back, the send it back to me and didn't even touch it.
I have a Kahr P9 for many years. Zero malfunctions, no tool marks, excellent trigger. It's is my vehicle BUG, in the armrest. Good review, thank you.
Right with you buddy. My all black P9 with night sights is great. The barrel at 3.5 inch if great. I can wrap all my fingers on the grip. Checks all the boxes.
Thanks for watching & commenting.
I know the Kahr “P” series are the premium models.
The pistols I have are the Value series so they have some rough machining marks, which can be fixed with a dremel tool, buffing wheel, & polishing compound.
I have had two Kahrs for some years now, CM9 and CW380. The 9 has always functioned perfectly, the 380 took a little fiddling with at first. Get a +1 magazine spring and follower from MagGuts for each for a slight capacity increase, and night sights are nice, too. I think that the long, buttery smooth trigger pull, like a fine revolver, will really work to your advantage, if you ever felt the need to draw it, because you shouldn't have a negligent discharge, you have to be deliberate to pull through the stroke. I think it makes me a better shot, rather than a short, light trigger pull. Practice and dry fire.
Agreed. Well said!
Hey Tom question where can I get the +1 magazine for the cw380 and the night site any links or website thank you
The +1 spring and follower for the magazine came from MagGuts, and the tritium night sight came from Kahrs, on their website.
Ive been carrying a kahr pm9 for 20 years now. Several thousands of rounds run through it. I was going to get the iwi masada slim as a larger newer ccw. But kahr just released $500 new optic ready double stack pistol coming june 2024 that can take sig p365 and hellcat mags without an adapter. So I'll probably be waiting till june for that . But I will always have my old pm9 as a back or summer pocket carry.
I've owned three CM9'S since 2011. Flawless function and slightly smaller footprint then my 365. However, not the edc for those who feel the need for 15 plus rounds.
The Kahr X9 double stack 9mm is coming out soon. That could be an option for those wanting a higher capacity magazine.
@@Luv2HuvrTrue, but have that covered with my 365 and OG Hellcat. Was hoping for a stack and a half as short as my CM9. Thanks for the review Sir.
I just purchased my brand new CW380 for just under $200. Previously have owned the CW9 and the CT380.
😮 thats a good grab
That’s an excellent buy. Was it online or a local store? That’s the lowest price I have ever heard of.
@@Luv2Huvr online.......Dahlonega Armory.
@@Luv2Huvr online.... Dahlonega Armory.
I've had a CM9 for a while. It benefits greatly with a reduced trigger spring from M*Carbo and a grip sleeve. Also got a +1 plate from Galloway Precision. The trigger isn't my favorite but once used to it plenty accurate for me.
Thanks for sharing. Same for me. It took some getting used to the longer trigger pull, but very smooth and I like it better than Glock.
Very nice handguns....i pocket carry the CW380 as a backup....kool vid subbed 👍🏼💪🏽👊🏼🎯🔥💨
I allways wanted a kahr cm9 or pm9 i just like the way th ey look and the trigger design picked one up new of buds for 290$
I’m sure you will like the trigger. Out of the box it’s a long but smooth trigger pull. 👍🏼
You should try the Diamondback DB9 Gen4. it’s on sale from Palmetto Arms for $200, I’ve used mine for 3 years. It’s painful to shoot but surprisingly accurate.
I have heard of them, seen them in stores but never fired one. If I knew someone that had one I would give it a try.
If you are ever in Lower Alabama let me know and bring it over to the range.
@@Luv2Huvr Thanks for the invite, I’m a bit a aways but if I have opportunity I’ll keep it in mind.
Love the Kahr CM 380, I have come across it twice now and did not buy it. My bad
Hi, can you elaborate on the CW380 carbon fiber finish already wearing off when you opened it? Was it just flaking off? I have one on the way and this is the first report I've heard of the finish having any kind of issues so now I'm concerned that there are durability issues. Did Kahr offer to refinish it with no questions asked? I'm assuming you had to send it in to them - did they cover all associated costs?
Yes, the carbon fiber finish was flaking off when I took the gun out of the box. When I contacted Customer Service they told me I could have it re-finished and choose any pattern they offer. I got the plain black finish.
Out of the box this pistol looked more like a factory reject than a new firearm.
Also this CW380 had more un finished machining marks on the barrel and slide than my 1st Kahr CW380 Pistol.
I did have to pay $ to return the gun for refinishing. While I returned it I paid for the Trijicon 3 dot night sights to be installed by the factory.
While it was being completed I was contacted by customer service to ask if I would accept a $50 discount because they accidentally scratched the slide while installing the new sights.
I tried to counter their offer with saying if I they would install the new sights at cost I would agree to accepting the damaged slide.
They turned me down. I got the new night sights installed on a new slide.
Other than that hiccup I was satisfied with the customer service interaction.
I will tell you it did take a good 200 rounds before this thing would run reliably. And a couple of hours running a Dremel tool, polishing wheel and buffing compound.
Thanks for the prompt response. Yikes, that all sounds.... not good and shame on Kahr. I knew I was taking a chance with ordering it but I'll be all in less than $250 and I've been eyeing one for months now so I decided to take the chance. I went with the Carbon Fiber instead of the all black cerakote for the same price because I liked the look and the Carbon Fiber models are supposed to come with the upgraded steel 3 dot sights. Do you recall if it was just a standard black frame under the carbon fiber finish? Others seem to infer that the grip texture is more aggressive with the carbon fiber frames@@Luv2Huvr
@@shane6154
I believe it’s a standard black polymer frame that’s hydro dipped. I don’t recall the texture of the grip being any different. I just liked the pattern design so I could quickly tell the two identical models apart.
I do own a HiPoint C9 that has the dipped digital desert camo pattern and that thing is a champ. Never had a problem with it. As much as people rag on those it’s built like a brick. And it’s reliable.
Great if they worked , and cycled reliably .
I had a CM9 and really miss it ..........great pocket gun but lose mags in your shorts , (may) drop rounds from mags if loose in pockets...............so you know !!!
I agree both my CM9 and CW380 were that way. Since I replaced the magazine springs with MagGuts rounds are more secure and it carries +1 more round
I have the ct45 the big brother to the cm and cw
How do you like it? I'm thinking about getting a K40 or K9....
My Kahr CM-40 trigger failed and now I can't pull the slide off. I took the side plate off but did not see any way to make it work. Any ideas besides mailing it to Kahr?
Did the trigger break completely off the pistol, or is it stuck/jammed so you can’t pull it to release the slide?
@@Luv2Huvr It’s there, just does not release the firing pin. Can not disassemble. Even the gun shop tried. I have to call Kahr about it unless there’s a trick. The gun only had around 20 rounds fired. I have it since new. Just in the drawer all those years.
Definitely call them Monday morning. If they can’t help over the phone you can FedEx it to them. I had to do that with one of my CW380s. They refinished it under warranty for me.
@@Luv2Huvr Will do but the C series are warrantied for one year only. I won't make that mistake again. Adding Kahr to Century Arms as mfrs I would not buy from again.
Good to know. I was not aware.
Junk. Unless the slide stop is supposed to jump out while you're shooting
What was your experience, did you have difficulty with their customer service ?
@Luv2Huvr I stripped the small screw that holds in that spring, which screws straight into polymer. Not that I would even call it a spring. I sent it back, the send it back to me and didn't even touch it.