Yaesu FT-897 Transmit Frequency Expansion Mod (MARS/CAP)

Sdílet
Vložit
  • čas přidán 7. 09. 2024
  • Mods for the FT-857 and FT-891 should be similar. Here is the document detailing this mod, and others: www.qsl.net/oz...
    Join the Discord or Matrix chat server, if it's not too spicy for you. Videos post one week earlier on Alt Tech platforms. Links to these things and more: ocfco.net/info....

Komentáře • 32

  • @wa4cdm
    @wa4cdm Před rokem +3

    Please note that this mod only to ft-897's units outside of Japan. The ones made for Japan are hard coded and will not respond to the mod for TX.

    • @Lee_Adamson_OCF
      @Lee_Adamson_OCF  Před rokem

      Good info~!

    • @onedeadtony
      @onedeadtony Před rokem

      Lame. Can you explain hard coded to me please? Thx

    • @onedeadtony
      @onedeadtony Před rokem

      Also, how do you know this?

    • @wa4cdm
      @wa4cdm Před rokem

      @@onedeadtony The processor has rom inside that cannot be changed. Think of it as a one time programable memory.

    • @wa4cdm
      @wa4cdm Před rokem

      @@onedeadtony From some research by others. Also The radios made for the market Japan are known for this. I hope this helps you.

  • @zl1po844
    @zl1po844 Před rokem +3

    Note: the jumper numbering is labelled on the circuit board,to the right of the jumpers.
    My radio had factory jumpers on 1 and 8.
    I really did enjoy your witty explanation,
    Thank you sir from New Zealand.

  • @toddshook1765
    @toddshook1765 Před rokem +2

    Thanks for the demo. Love your outlook and sense of humor.
    Just picked up a 897d from our radio net auction with FC30 tuner. Just wanted to see how involved mod is.

  • @SilverBeardGuerilla
    @SilverBeardGuerilla Před rokem +4

    And people wonder why the 11m DX community love HAM radios . 90% of the operators I know run modded 10-12m radios or expanded Yaesus and Icoms . I've always found it funny how the manufacturers will build them this way with all the shitty regs involved , add some jumpers or a resistor , cut a jumper here or there and BAM . My newest radio is a AT6666 and all I had to do was push a couple buttons in the menu , smh , like a big old middle finger in the face of the FCC .

  • @pleasetryme
    @pleasetryme Před 2 lety +1

    Thankyou for this video i can confirm it works on a 897-d at first i didnt work because the operating manual explains 3 ways to do resets vm+ pwr or f+pwr or home+pwr the home +pwr does a full master rest and over rules the other 2 but the magic secret was the F+VM+PWR and THIS WORKS your a legend

  • @ampedupelectronics
    @ampedupelectronics Před rokem +1

    The blob doesn't need to be large and has no affect on performance on size...add SMD291 flux, for the chip resistor removal -- it will save you shaving off the PCB traces if you are a brute or don't have enough heat and is generally good practice.

  • @dang2157
    @dang2157 Před 2 lety +1

    I like the video and your viewpoints!!!

  • @GeorgeBartholomew
    @GeorgeBartholomew Před rokem +2

    Great video! Thank you. Where did you get the side rails for the FT-897? I've been looking high and low for a set!

  • @onedeadtony
    @onedeadtony Před rokem

    Hey Lee, a follow up on my Japanese model 897 mars mod. I don’t think it’s possible. CZcams won’t let me post a picture for you, but the configuration is different and one jumper is non existent. Anyways, just fyi, hope all is well

  • @thepesh
    @thepesh Před 7 měsíci +1

    Hello Lee - can you tell me where i find this outside frame [installed on this radio]?

    • @Lee_Adamson_OCF
      @Lee_Adamson_OCF  Před 7 měsíci +1

      Portable Zero. Not sure if they still make this one or not though. They still have one for the 819/857 though.

    • @thepesh
      @thepesh Před 7 měsíci

      Thank You - if have in stock i hope sending to UK.

  • @onedeadtony
    @onedeadtony Před rokem

    Hey, kinda related, I blew the f 1001 fuse for the CAT putting a panadaptor board in her. Do you have a resource for those? Google can’t find any

  • @onedeadtony
    @onedeadtony Před rokem +1

    Hey Lee, do you have any knowledge of if this would work on the Japanese model of this radio? The model that has reduced tx range and wattage? Thanks

    • @Lee_Adamson_OCF
      @Lee_Adamson_OCF  Před rokem

      If I recall correctly, I have read that the mods for the Japanese model are different, but I don't have any direct experience with that one. And I may be misremembering.

    • @onedeadtony
      @onedeadtony Před rokem +1

      @@Lee_Adamson_OCF hey! Thanks for responding! I enjoy your “color commentary “ immensely! I’ll let you know how it goes!

  • @ICONDLS
    @ICONDLS Před 6 měsíci +1

    How do you know if you have a Japanese version or US version radio?

    • @Lee_Adamson_OCF
      @Lee_Adamson_OCF  Před 6 měsíci

      I don't know. I suspect that you can probably tell from the serial number tag, but I don't have a Japanese version to compare it to.

    • @BobBob-il2ku
      @BobBob-il2ku Před 5 měsíci

      USA version will have a FCC id on the back tag sticker

  • @ampedupelectronics
    @ampedupelectronics Před rokem

    Power is really low on Business band did you confirm the power out of band?

  • @itrstt66
    @itrstt66 Před 3 měsíci +1

    why is it called mars/cap?

    • @Lee_Adamson_OCF
      @Lee_Adamson_OCF  Před 3 měsíci +1

      The original TX expansion mods were for 2m radios, which made them cover the nearby Military Auxiliary Radio System and Civil Air Patrol bands (both of which aren't really in use much as far as I can tell other than for business band comms). Modern radios are capable of transmitting on a much wider range of frequencies, but a lot of us still call it a "MARS/CAP mod" out of habit.

    • @itrstt66
      @itrstt66 Před 3 měsíci

      @@Lee_Adamson_OCF fantastic