✅ HOW to Make PLASTERBOARD Ceiling With METAL STUD 💪🏼 drywall
Vložit
- čas přidán 28. 05. 2022
- 🔥 Drywall partition ▶︎ How to Build a metal framed wall (70mm profiles)
🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻🔻
• 🔥 Drywall partition ▶︎...
Galvanized steel profiles for plasterboard systems
Composition
DX51D type galvanized steel profiles that make up the structure
of the Knauf systems of suspended ceilings and cladding for interiors and
on which the gypsum plasterboards are screwed. They include a
galvanized Z140 that protects them against corrosion. Have
predominantly a U-shape and L-shape with strength
mechanical and stability to absorb the efforts of the systems,
without any load-bearing function.
Storage
The product should be stored horizontally in a dry place
sheltered from moisture and protected from direct sunlight. Avoid
direct contact with liquids or chemical substances that may affect
its physical characteristics.
VERY GOOD
🔥 Drywall partition ▶︎ How to Build a metal framed wall (70mm profiles)
🔻🔻🔻🔻🔻🔻🔻
czcams.com/video/iNF2HZv3Xjg/video.html
Galvanized steel profiles for plasterboard systems
Composition
DX51D type galvanized steel profiles that make up the structure
of the Knauf systems of suspended ceilings and cladding for interiors and
on which the gypsum plasterboards are screwed. They include a
galvanized Z140 that protects them against corrosion. Have
predominantly a U-shape and L-shape with strength
mechanical and stability to absorb the efforts of the systems,
without any load-bearing function.
Storage
The product should be stored horizontally in a dry place
sheltered from moisture and protected from direct sunlight. Avoid
direct contact with liquids or chemical substances that may affect
its physical characteristics.
which country are you located ?
Aa0}
Работа выполнена на твердую 2😁👍🏼
Если в 2 слоя ГКЛ, то норм
Опыт , твёрдо говорит , что если стык ГКЛ ( что заводской , что торцевой ) не крепить на профиль , то будут проблемы .
А если еще и не делать фаску на не заводском стыке, то после малярки трещина на потолке между листами, дело времени
Видео о том как не в коем случае не надо делать потолок, нужно расстояние между профилями 40см и на стыке листов обязательно профиль!
Да у них так не заморачиваются кака у нас!
Технические листы от кнауф почитайте, через 50 см можно делать
@@user-ep6iy8sb8n какие 50см? Ширина ГКЛ 1,20 по стенам шаг 60 достаточно а потолок шаг на 40 при толщине ГКЛ 12,5мм
@@user-ep6iy8sb8n вы считаете это правильный монтаж?
@@aleksandrsuntsov7883 конечно,это рекомендации производителя, ему виднее. и по факту прочность гкл листов в продольном направлении в 3 раза выше прочности листов в поперечном направлении по этому увеличение шага на 10 см от предложенного вами варианта вообще никак не скажется)а в скорости монтажа прибавится)
Foarte ,foarte misto culcușul de șoareci!
Какая нахрен мышка?
انت ركبت الالواح عكس الحديد جميل لكن بين الحديد والحديد فارغ لذا يجب ربط الالواح ببعض عن طريق قص قطعة صغيرة من الحديد وتركيبها بين الحديد المربوك بالجسر الاول لانه بعد سنة او اكثر سيكون هناك شقوق او احتزاز عند حفر او تركيب شيء بعد مدة
Man you are good! I will try to do my apartment's ceiling for thermal insulation ! It's different for me because it's flat and I don't want to loose high but I think I am gonna be ok
Buen truco para sujetar las planchas y muy buen video como siempre
Lavoro veloce , pulito, senza troppi attrezzi.
Complimenti!🎉
A dire il vero ha fatto qualche errorino di troppo, i giunti sono larghi, il lato corto del pannello non è stato smussato, ed infine ha montato le lastre al contrario!
Too many pricey and exotic items to build the frame for that ceiling.
As a UBC journeyman carpenter, I built the drywall ceiling frames with " L " track against the wall, and regular 1 5/8" x 1 1/8" inch track as the cross members to screw the sheetrock on.
For structural strength, I put 2 tracks facing each other, basically making a rectangular torsion truss, zipped together with framing screws.
For support, used same track, screwed securely to the ceiling.
Would bend the anchor point with a piece of scrap wood for strong support, right at the 90° anchor to the ceiling.
To not waste time measuring the length of the track suport struts, would let them be 2 or 3 inches longer than the cross rectangular structured track.
Would alternate side to opposite side the track struts for stability of the frame crossmembers.
Finally leveled the frame crossmembers and finally drove home 4 screws per strut, through a 3/4" piece of plywood for shear stability.
Would then just cut the overhang 1/8" above the leveled truss track, and bent it up out of the way at 90°, and anchor the turned up offset to the strut for further stability.
Final use of track scraps was screwing every strut to the framed torsion track truss, at angles to create a triangle for further stability of the ceiling frame to hold the wallboard.
Built ceiling frames with just "L" track for perimeter, and track for the crossmembers, and bracing.
Cheaper and faster than your build, and never had to hunt down special connectors, to make the ceiling frames. And never ran out of material. And just about any lumberyard has these items in stock all the time.
Likewise having less items needed in the inventory is usually better and more cost effective.
Never had any problems with ceilings.
Had to do build it fast, level, accurate, and cheaper.
But quality was never compromised.
Así hice yo mi primer techo en cada de mi madre. Más fácil que el último que he echo en mi casa. Algo más caro por que lleva más materiales, pero te quitas de muchos cortes para hacer los enanos. Supongo que depende también del tipo de techo. Gracias a tus videos ya he echo 4 cositas. Feliz año.
i have a question, when i drill the plates to the metal studs, how do i prevent the drill from walking and going crooked, the metal bending and then breaking drill bits? ive broken a ton of drill bits. do i need to drill fast or slow or start fast en slow, or start slow and end fast or something else? and how much pressure do i need to put, and do i need to use a special kind of drill bit for this other then normal metal drill bit?
Also tried directly with screws but they also started walking and all crooked,
Μπράβο σου! 👍👍👍
Bravo, you make it look easy :D
Я смотрю вообще не заморачиваются с монтажем каркаса...стыки ГКЛ в воздухе висят...ну и у нас на мансардах потолок не по прямой делают, а под углом...Вообщем круто 👍🇷🇺🇷🇺🇷🇺
Ыыы
смотри внимательней! это заводской шов.ему можно так висеть! ...О да я смотрю Ты тут не один такой!)))) Посмотрите каркас п-112
@@4ugrum4 нельзя, лопнет 100%
А пароизоляция где?
вот если бы ты сделал потолок без каркаса....
хотя то, что сделано каркасом не назовёшь.
Страшная халтура.Видео -как не надо делать.
Que maquina usas para hacer los agujeros en las viguetas?
Hustej týpek... thumbs up...👌👌👍👍👍👍👍👍👏👏👏👏👏👏
Thank you
thank you sensei.
Buen trabajo
Thank you very much mate. I just wondering what helping tool to make for supporting the plasterboard, because I've got to do alone. Your idea is brilliant 👍
amazing good luck
又學了一招....超棒的
Muy buen trabajo 👍👍
Wow the best job saw my eyes
Good man👍👍💯
Very good
Best job Sar ji
Chapeau bas 👏
А я бы скальп снял за такую халтуру!
Genial 👌🧱🛠🔨
bravo complimenti
Bravo Man👍👌🌟💯👏
Gracias
Przydała by się jeszcze paroizolacja, wykonanie dobre👍
¿Para ese aislante no necesitas guantes? ¿O ese no pica? Gracias un saludo
Very good job! 👍
Where Can I buy these Aluminium Profiles?
Nice bro
Bravo pour le matériel le plus mieux est solide et fort et
Merci
Bravo mastorcino!!!!!!
Nice
Which system is this ? I was planning on switching to Knauf but this looks better . Anyone know ??
Legal!!
بالعادة حسب هبوط السقف الجبص عن سقف المكان ازيد عشره سانتي على المقاس و ثم اتي بعمدان صاج بهذا المقاس
....
العشرة سانتي اقص يمين يسار ثم اثني العمود و برغيان و اثبت العشره سانتي بالسقف ببرغيان و اثبت سقف الجبص بهن
...
أمكن و اقوى
Super mais il manque le par vapeur contre l'humidité
Man you are good! I am gonna do insulation at my apartments ceiling. Can you tell me your opinion? what distance should I leave from the ceiling plaster to the plasterboard? ( in between I will place mineral wool 7cm thick)
Tbh that doesn't really matter, you can leave no space in between and have good isolation. The isolation depends on the materials you use, so chose how low do you want your ceiling and start from that. Now if you want other things like cables there, then leave at least 10 inches between.
Adamsın adam adam ❤
謝謝分享
Good
uxcell 81mm Length 1/4" Hex Shank 10mm Hexagonal Deep Socket Nut Driver Bit Gray 5pcs
👍👍👍
原來 骨架一按就組裝就好了
下次我換個方式來拆😊
C’est le sosie officiel de Karim Benzema, il lui ressemble tellement
Top
El taco de latón no es muy viable... Suele partirse ...
Hai adottato il miglior sistema per fare da se
好極了,大開眼界!
👌👌👍👌
The plates are several centimeters long and wide
Brak paroizolacji i kręci Pan do obrysówek. Reszta git
Hola podrias darme que tipo de medidas de los accesorios, que usas para los anclajes de pared y techo.
Para la pared suelo usar tacos plásticos de 6mm con tornillos de pladur placa placa de 35mm. O también los hay ya los que bien con taco y tornillo.
Para colgar del forjado taco de latón, varilla roscada y tuercas métrica 6. Para el taco de latón de 6 hay que taladrar con broca de 8mm.
Benzema a changé de boulot ?
Pones aislamiento termico no? El acústico cómo seria?
А где профиль между торцами листов, брак в интернет, не стыдно
Все правильно, здесь заводской край отлично держит,открой кнауф, это раньше профиля вставляли,а сейчас это прошлый век
thank you for sharing. btw can i know the song name here?
😮👏👏👏👏
Ou trouvez-vous ces rails crantés? Dans le temps (plus de 10ans j’en trouvais) mais à l’heure actuelle plus moyen !!! Brico, dépôt, Leroy, … ca n’existe plus. Ou votre vidéo date ?
j ai cherché aussi sur le net et je ne trouve pas non plus.
Видимо в продаже нет: (Анкерное рейки для крепления ПП профилей.) название выдумал ;)
gde ti je paropropusna brana majstore.....ima da ti se vlaga kondenzuje za medalju iznad te ploce.....
А пароизоляция?
Jak nazywa sie ten profil w którym wpina się cd60 ?? Gdzie to można kupić??
Как называется профиль с зубчиками?
Металлокаркас собран с нарушениями технологии КНАУФ. Всё сделано тяп-ляп. Очередной "самоделкин".
А это и не кнауф, а туркей, с такими профилями😊
@@user-bm8bh8mp9m какая разница? Технология одна и та же.
23 года делаю. Потолки из кругом, из овалом, волны, короба, свет. Свои наработки. От людей учился . У турка если на поперечке о.. к., то з. б.. Цаа!! Покажи своё
@@user-bm8bh8mp9m Я занимался гипсокартоном лет 8-10 назад. Строго по технологии КНАУФ. Нормально получалось. Перегородки, потолки. У меня был учебник с расчётами, формулами, образцами, спецификациями. Когда ушёл с этого дела, документацию отдал напарнику.
Pregunta: Cal una broca tan llarga per posar un tac de 35? 🤔💥
👍
Za mna super video 👍 aj taky lajk ako ja to uz teraz hravo zvládne 😁👍👌
Я вот смотрю, и Диву даюсь, Почему этот мастер минватой или стекловатой, работает без очков ?и не пошёл в туалет вытереть себе зад? Думаю что это всё сделала на компьютере! этот мастер совсем не мастер!!!
why this metal stud dont have holes already maked in the factory? Ist that made in china?
Temiz işçilik ama yavas ben 3 kati daha hizliyim bu adamdan
Hanging 🎉
How to call and were to buy drywall beam at 2:06?
Y el foco?
No es un techo ,es un cielo raso.
Ein Dach aber Gipskarton und keine Dampfsperre?
файна робота, але я наче бачив спеціальни шпильки з регуляторами для цього, не такі як у вас
I don't like using those as aliens can still get me.
KARIM BNZ 😁
А из чего его ещё можно сделать???
Hay que usar tacos metalicos de golpe, no de laton.
Росстояние между профилями большое
Mi panaaaa coño que fino broder
U n atornillador a batería te vendria👌
Sắm máy siết ty. Ai đâu thời nay còn siết tay.
A las viguetas pretensadas no deben clavarse nada. Son muy frágiles por ser pretensadas
Cara incendios se partiran
Ок
❤️👍✌️
👍👏👏👏✌️🇦🇷
Ek yerleri hep çatlayacak... ek yerlerine 30 cmlik metal parcalar kullanmalısın
Habar nu ai să faci corect . De ce nu ai pus folie anti condens ?
Bravo ai dreptate mai nimic concret.