Hi, the manifold after working long time, will starts leaks pressure 70% can be a bolt damaged by its self in the Engine cylinder head, that why i like to fit a new manifold that comes with new bolts.
Hello, thank you, I have ML250 with same oil leak issues, what is the malfunction exactly?, a broken unit of the oil filter cooler? Or intake manifold?, do you really need to replace them or can they be fix? Thank yiu
Hi, the oil filter housing with the oil cooler can be fixed by replacing all the gaskets and seals, put the manifold super better to be replaced with new manifold because these manifold overtime can get its bolts broken by itself in the cylinder head, !! i recommend for this big job to use new original car spare parts, For peace of mind. Thanks for Watching and for the nice Comment, Have a Nice Day.
Hi, if you watch the Video again from start to the and , you will see how i did this job , i just moved the compressor a little bit away , from the oil filter bolts . i did not empty the air condition gas. this job is not easy remember this. especially for this car. Good Lock.
Thank you for showing from all sides. Very nice video.
Glad you liked it
Big Job, Great camera Views, Well Done.
Thank you very much 😊 for watching, have a Nice Day.
Great Job Great Video
Glad you enjoyed it. Thanks For Watching.
Top job great vid !!
Glad you enjoyed it
هاشم تحياتي والله يعطيك العافية فيديوهاتك حلوة كتير واحترافية انت بالبنان ولا برات البلاد
Mr. Ahmad, Thank you Very much For your Nice Comment.
.السيد أحمد ، شكرا جزيلا لك على تعليقك اللطيف
Hi frend. Congratulations for the video you posted. I have the same problem, I wanted to know why you also changed the intake manifold? Thank you
Great job, I’ve similar problem where are you based?
recently did the same job, the manifold bolt snapped in the cylinder block
Hi, the manifold after working long time, will starts leaks pressure 70% can be a bolt damaged by its self in the Engine cylinder head, that why i like to fit a new manifold that comes with new bolts.
👍👍👍👍
Thanks
Nice job, where are you located ?
Hello Mr. Mike, Thanks for watching, i do work Mechanic in Sydney.
Hello, thank you, I have ML250 with same oil leak issues, what is the malfunction exactly?, a broken unit of the oil filter cooler? Or intake manifold?, do you really need to replace them or can they be fix? Thank yiu
Hi, the oil filter housing with the oil cooler can be fixed by replacing all the gaskets and seals, put the manifold super better to be replaced with new manifold because these manifold overtime can get its bolts broken by itself in the cylinder head, !! i recommend for this big job to use new original car spare parts, For peace of mind. Thanks for Watching and for the nice Comment, Have a Nice Day.
@@H1111H thank you for your advise, very good video, 👍👍
is necessary to remove the A/C compressor ? and if it have to be removed has to emty the A/C system ? i need to do this job on my own car
Hi, if you watch the Video again from start to the and , you will see how i did this job , i just moved the compressor a little bit away , from the oil filter bolts . i did not empty the air condition gas. this job is not easy remember this. especially for this car. Good Lock.
@@H1111H is necessary to drain the oil ? Or can be done with oil on the engine?
We need how to remove engine oli crank case bro
Thanks for watching and thanks for your nice comment.
👍 watch the new videos.
Hi Hachem, do you service cars, I am Sydney based.
Soon i will do Car mobile mechanic repair in Sydney 20KM around Liverpool inshaa Allah , thanks for watching.
@@H1111H Great !! I have an ML250 & CLS 250.