SURFBOARD hand shaping and glassing / High performance short board /
Vložit
- čas přidán 8. 10. 2022
- Board dimensions are 6'2 x 19 1/2 x 2 1/2
PU/Poly // Glassed 4x4+4 / Futures quad - Single concave nose to tail.
Follow me over at instagram / shrednaught
I went with a slightly wider tail and quads as I have large feet and If I don't get my back foot exactly where I need it I feel my foot hanging off the tail on more narrow tails. This is a perfect example why everyone should work with a shaper and get boards customised to their personal preferences.
Ive ridden the board a few times since the build and I have to say I love it.
Please feel free to leave comment if you have any questions regarding this build or any others.
Thanks. - Sport
Hello! Where are you? I'm really looking forward to your videos!!! Come back, dude!
One day 😅 I’m a bit too busy for videos atm. But I am always here for any information you may need via msg 🤙
Franchement une des meilleures videos de surf hand made que j'ai vu sur youtube !
Just finished my second surf on a board my dad and I shaped together. He's shaped all of my boards and I owe him so much. A Frankenstein small board with little nose rocker, flyers, 5 fin setup, v in the tail on the rounded pin, and it flies.
Thank your shapers, they put so much work, thought, effort and love into these things.
Hoping that both papa will read this, and that you'll receive the collective thanks from your viewers.
Hope your life things are going well also, and that this thing flies - love quads!
Yew! Sounds like a weapon. 🤘
Man I get so excited when I see you uploading a new vid. Especially high-performance boards!
Yew!
love your start to finish videos! shows how much work goes into a board....worth every inflated dollar!
Haha yeh there is quite a bit that goes into them. I like showing people the work involved so they don’t think that surfboards are “throw away” items
Dude we need more content!!! 🙌🏻
I know…
Sorry I have had so much stuff going on in the last 6 months. I’ll get some new stuff up eventually 🤘
Love watching a master of their craft at work. That gauge you used to mark the rails is nifty!
Thanks mate. Yeh it’s super handy. Can find them at any big box hardware store
Great Job!
Love watching your videos! So sick, keep up the great work!
Thanks 🤙
The board looks amazing! ❤
Thanks mate 🤙
Another beautiful masterpiece as always. Love it. Great work and great video thank you
Thanks mate. Appreciate the comment 🤙
I am loving these vids, keep up the great work.
Thanks mate 🤙
Great stuff as usual. 🤟🏼
Cheers 🤙
That is such a sick board, sooooo slick!
Thanks mate. Appreciate it 🤘
Beautiful board, mate! Great video as usual.
Cheers 🤘
So fun to watch and looks like a sick shape! Well done.
Thanks mate. Glad you enjoyed it 🤙
Good job from France
Bloody great work bud! 👏 lovely looking board
Thanks mate 🤙
Thank you so much for al The videos... This is really great and i learn al lot.... I'm a skimboard shaper from Italy... For me it's an hobby... Great job! 🤙🏻🤙🏻🤙🏻
Thanks mate. 🤙
Yoyo genius man i got insperated by every videos nice job i like that
Thanks mate 🤙
i started surfing 5 months ago, i always excited to see your videos making a surfboard. Hope my first surfboard was made by you 😀 good luck always
🤘🤘
Thanks
It's a surfboard that looks good👍
🤘
Hope you’re doing well man!
Love your channel and everything about it, recently I have been wanting to get into shaping I was wondering if you could do a video shaping with minimal tools so I could see and follow it.
Thanks
Missing your videos so much!
you had style well done bra
Aspiring surfboard shaper here. I really enjoyed this video and the one with the planer tips. This one left me curious about a thing. What is that product you're applying with a paint roller starting on minute 17:31? Thanks for sharing!
Song: Pär hagström-doesn’t matter what is real 🤙🏼
New shop brother? Keep up the videos man. Been frothing on the content since the first upload!
Thanks man. I really appreciate it.
Full respect to you man.
Thanks dude 🤘
cool video 🤙 Mahalo
I’m about to start making my first board, think I’m gonna make around a 7’2 fish twin fin. I have noticed that some shapers route their fin boxes before glassing and others afterwards. Is there a benefit to one or the other? Love the videos
Awesome video mate, I learn so much from you on each video. I truly appreciate all the hard work you are doing with your channel.
I have a question for you, is there a reason why you are routing the fin boxes before glassing and after glassing on some boards? Is there any advantage to one or the other?
Thanks for your time and I hope you are scoring some good waves! Greeting from Vancouver Island, Canada!
Mostly depends on whether the board is a colour or clear. Clear I do into foam and colour I do after glassing. Keeps it looking neat
Love the video, was your top lamination a cutlap as well or just a freelap onto the bottom, cheers
Cutlap for the bottom then free lap the deck from memory
Nice job. I learned a couple new things. Thank you! 1) Do you eyeball masking the rails for painting? 2) Did you dig into the bottom sides of the leash plug hole with the head of the screw in order to make the bond stronger? 3) What is that clear stuff you are applying at 17:31? Gloss? 4) Where can I buy a roller like the one you rolled the glass down with after you cut the lap? Thanks again!🤙🏼🏄🏻♂️
Yeh I just eye balled the tape lines on this one. As it’s a personal board I try force myself to get better with things like that. The clear stuff is clear acrylic. Concrete/paving sealer to be exact. The hard rubber roller can be found at most big hardware stores I’d imagine. I got mine from Bunnings.
Thanks for watching 🤙
15:28 Unique method with tape and screw when installing leash plug.
Yeh I underscore the foam and also poke holes in to create an anchor. Then mix the resin with milled fibre and they’re strong as.
Hey I’m just wondering what paint did you use to paint those rails? I’m new to shaping and wondering if I should dye my resin or go with how you did it
where are you bro? need some more videos bruh
hi man, saw this vid again. just curious if the acrylic sealer will work with epoxy resin glassing?
If you setting up a patreon helps videos keep coming I'd love to chip in that way!
Thanks mate. I appreciate the sentiment. Don’t think I’d have enough support to get the mortgage paid tho 🤣
Unprofessional surfboard shaper here who can find using power planers tricky to use and quite clunky, I was wondering if you’ve had a similar experience?
Hi I can not find the answer about final coat you use ,What type of coat you rolled on the board? And How to deal with the roller fur that left the roller and stick on your board? Thank you so much🎉
Do any hand shapers use a 2'or 4' precision carpenters level to level the bottom or deck? How are the rail and deck thickness symmetrical on each side of center without checking the bubble? When you put a rail profile gauge on each side of the board do they match? Curious! 🤙🏼✌🏼
I don’t use a spirit level. I use an 8ft ally bar to get my rocker set. I then use a 3ft flat sanding block to flush everything up. Once you have a 90* outline and true bottom you run your rail measurements from there. Several rail band numbers are used then the same amount of screening both sides. You can then go to a rail gauge but I prefer to use my eyes and hands. After a few years of doing it you can get it almost perfect. Nothing is ever 100% but that’s life 😅
Hey mate, do you buy blanks that are ready to be shaped? Or do you buy blocks of foam? If so whats your method for cutting the block into a base shape?
Cool vids as always! What kindnof paint did you use? Just regular acrylic??? 🤙
Yup. Water based kiddies acrylic. If you use a large amount just make sure you seal it before laminating 🤙
Another great video! Do you know if the paint pen on stringer is ok to do under epoxy resin? 🤙
Posca should be fine? But you better double check with your epoxy supplier as I’d hate to be wrong.
In the case of having a 3-piece tail pad, do you think putting the center piece is an easier place to start with? I start with the sides first and honestly its a gamble most of the time.
I’m definitely no pro when it comes to putting on tail pads. But I’ve found that the middle section of the tail pad you can line up to the stringer and get it relatively straight that way. Then the side bits just fit in next to the middle. Tbh I still mess them up even doing it that way 😅
@@Shrednaught Noted I'll have to give it a shot, who knows 😂
@@grantscrabis8136 Definitely do the middle section first. Lay all three pieces down and mark the corner edges with a pencil or piece of tape.
Hey Shred. Back in my youth (80's 90's) I used to shape the odd board and make glass fins for a few extra quid. Someone else glassed my boards. I'm building an old man board now (in my 50's) and have a question. Do you add wax in styrene on your lam or just on the hot coat?? I just noticed any bumps sand pretty easy without sticky mess. I remember missing the WIS on a lamination I did for a centre fin and that sucker would not sand 😁 Cheers from Cornwall England
Good stuff mate!
The lam is only resin no wax in styrene. Only add wax to the fill coat to allow sanding. The wax creates a film on top of the resin which allows full cure for sanding but if used in laminated layers in could cause delam between glass. Good luck with your build and hit me up if you need any more help 👍
Sweet cheers 👍
This vid has so much to digest 😅. Always appreciate you work man. I have a question regarding the final acrylic coat. I'm trying to replicate this... bought some acrylic floor sealer... but when I apply the acrylic I get a ton of little bubbles (using a foam roller). I'm wondering if you experience the same thing or if you apply it with a different type roller, or if your sealer just doesn't bubble 🤷
I use a high density foam. Sometimes I get bubbles if I go too quick but other than that it doesn’t really affect me. Maybe it’s the acrylic you have? I use a concrete sealer acrylic
@@Shrednaught Thanks. Yeah I am using a high density roller as well. I guess my acrylic formula is just prone to bubbles. I'm using Concrete Coatings SuperSeal 20WB here in the States. Anyway the bubbles seemed to be less noticeable after drying, so I will try to scuff them out with some 400 grit later.
What sander you using? I like that it has the vacuum attachment
It’s the mirka deros 5 and I bought it for that exact reason. As I don’t have a dedicated sanding bay I needed a vac extraction and this sander and the mirka guaze sanding pads eliminate 90% of dust 👌
you are a true master. I love the way you have coloured the rails with a roller. would you have any issues using this same painting technique with epoxy? I am always conscious of contamination issues with epoxy as it is so temperamental.
As long as you use the appropriate paint and don’t lay it on too thick, shouldn’t have any issues. If you are still unsure just do a spray on the final sanded coat and do a clear acrylic coat over the top.
@@Shrednaught thanks again for a great vid and your dedication to answering responses. You really do beautiful work.
Thanks mate 🤘
Hey man, love the video. Long time viewer here! I take a lot of inspiration from you
Could you give me any tips on sanding?
The last few boards i've made i get a lot of burn throughs. Im using a cheap palm sander 12k rpm with 240 and 320 grit sandpaper. In your experience is it just a skill issue, ou hardware issue?
Thanks! Keep up the good work!
Are most of the burn through happening on the curves of the board? If you find your getting burn through always in the same areas slow the machine down or even just go back to hand sanding the spots.
@@Shrednaught mostly on more curved surfaces to be honest. Maybe i have not devolped the sensibility to know how much pressure to apply or when to stop yet. Some things just come with experience
@@DrHornyDude I’m still struggling with sand throughs too but I’m getting better because I slowed down my sander a lot and don’t use anything gnarlier than 220 on the rails and then I finish off with hand sanding. A softer pad helps too.
@@joeblow1942 yeah, i'll try to get a slower rpm sander and see the results. Thank you guys for the tipss 😁🤙
Great board, as all the previous. Can i do a question? I have an eps blank, sealed with epoxy slurry. I need to paint it. I have acrylic water base paint. What you suggest me? Painting before lam or over hot coat? Thanks a lot and sorry for my english
You could do either but I’d always suggest checking with the resin supplier. If you have a small off cut of foam you could always do a test and check that it doesn’t bleed 🤙
@@Shrednaught Thanks you very much. Good advice. I was thinking on that. Now that you suggested, I'll do some test... Specially because the resin that I have is not RR neither first class brand. Greetings and thanks for teaching us
Good luck 🤙
@@Shrednaught I hope... Thanks again
Cool music who are they ?
What was the last thing you put on the board? The one you are using roller. 17:32
is it called that because they shred not?
what kind of paper do you use for the inlays of your logo? regular computer paper, transfer paper?
Rice paper
Nice board ! Which type of paint are you using on a PU foam ? thank you !!
Just kiddies poster paint from hardware store.
@@Shrednaught Is it acrylic? Do you find that it holds up pretty well to UV?
@@joeblow1942 yuh water based. Just as good as any other paint I’ve used.
I was wondering if you could give me some tips for shaping my board. Im at the point where Ive made the rails but my rasp gouged out a spot or two on the top deck, If I sand it down my board will be too thin so should I just keep it like that? Will it effect painting or glassing?
PU foam? Try heat the spot very lightly with hair dryer or heat gun they should go away if not then light weight filler
And if it was EPS then just fill with a mixture of epoxy and microballoons.
Luke and Joe have both given excellent tips. It’s hard to give an exact fix without seeing how big/deep we’re talking.
I don’t think sanding it down is worth it. You want the board how you designed it. Aesthetics are secondary here. Holes will effect the colour when glassing if it’s a deep rich colour they will show darker when filled with resin. Work with the ideas given and if they don’t work we can try figure out another solution. Good luck 🤙
Logos were invented to cover defects. 😂
@@garretdouglas4056 fair enough
Hey man, do you have a link to the tool you're using at 5:55 for marking off the rail bands?
Cant do links on CZcams. It’s just a scribe measure. Get them from any big box hardware store 🤙
Come back!!!
Mate do you prefer PU or EPS blanks to work on? Stringer or no stringer?
I’d say PU / stringer
They clean up the nicest and the stringer stops flex when shaping .
Hey man, what brand/make is that hand sander you use?
Mirka deros 5 🤘
Nice setup mate, are you doing it full time now?
Thanks mate. Na still part time gig at this point unfortunately
@@Shrednaught sorry if im blasting you with questions lol what brand of acrylic did you use? how long did you wait for it to dry before glassing? and did you seal it with clear acrylic spray or resin before glassing. cheers!
Just kiddies poster paint from Bunnings. I left it over night to dry. Didn’t seal it at all but I did do a cutlap just in case I did push some colour out. That way you won’t notice it 🤙
@@Shrednaught thanks mate, will surely save heaps of money instead of buying spray paint
For sure 🤘
Hallo bro can u tell me plz what kinde of resin is the better tnx
I use silmar poly or keyline epoxy 👍
@@Shrednaught great tnx bro i hope that i could finde them in morocco lol
Wanting new videos
Haha life is hectic atm sorry
Can you make a fiberglass skimboard
I have made 2 before. One was with poly and one was xps and epoxy.
It’s doable but not something I do regularly
Hello! How many kilos or liters or gallons of epoxy resin do you use per board?
Hey mate,
Depends on size of board and glass weight but a typical guesstimate would be 3L
@@Shrednaught tks!
@@Shrednaught i learn a lot with yours vids
I surf budgiewoi beach a lot what board would you recommend
I’m not exactly sure where that is mate.
@@Shrednaught oh ok i thought you where an hour north of Sydney my bad thank you
I’m over in Western Australia mate 🤙
Hey mate what’s stuff that you roll on right at the end?
Clear acrylic sealer
And it sands good?
You can give it a light buzz with 360 polish pad and it’s good to go. Or scotch pad
i wish i couldbuy your boards
🤘
Why “Shrednaught”?
I guess u used 4 oz fiber isn't that?
Yup. One layer on bottom 2 on top
@@Shrednaught great
I want to make a 4'4 surfboard but i want to make it really wide and thick to make it about 23 ltrs, what kind of foam would you reccomentd i use?
Sounds like you’ll need to use EPS foam 🤙
@@Shrednaught ok thanks