How To: GE LP Conversion Kit WB28K10556
Vložit
- čas přidán 1. 07. 2024
- How To Replace: GE LP Conversion Kit WB28K10556 www.appliancepartspros.com/ge...
For a full article, please visit: www.appliancepartspros.com/b/...
Symptoms: converting gas type.
Tools: socket wrench with 9/32 head and extension, 1/4" nut driver, Phillips screwdriver, flathead screwdriver, 5/8" open ended wrench, 1/2" open ended wrench, masking tape.
This GE made Range LP Conversion Kit replaces the following older part numbers on General Electric, Hotpoint, RCA, Sears, and Kenmore Ranges: 1469119, WB28K10161, B00MOCKUK2.
Buy the new Range LP Conversion Kit WB28K10556 here: www.appliancepartspros.com/ge...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepartspros.com/. We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros - Jak na to + styl
Thank you for this!
The instructions that came with the range were totally inadequate.
"Converting the oven burner: 1. Remove oven door, broil door, oven bottom, and burner. The oven burner orifice is located behind the drawer. On some models a metal shield must be removed." Uh, okay...
There were two differences between this and my range (model JGBS66):
Removing the door - on my model, you can't slide the door off hinges that stay on the range body; you have to lock the hinge and lever the door, including the hinges, out of the range body.
The oven orifice has to be replaced by one provided. You can't just adjust the one in place.
However, despite these differences, your video made it all very clear!
No doubt, was about to attempt access w/o removing oven door; have a few more steps, hoping it works ok
Where is its location tho?
Great video - thanks for the clear direction!!! I was actually able to access the oven pressure regulator from the back of the oven. This made it a bit easier as I did not have to go through the oven from the front and remove the burner and other pieces. FYI for those who may also have the ability to access the same way.
I did mine right now just by looking you’re vid it really helped all the steps u need it work in minutes to do it
Tremendous job explaining. It’s obvious you are a teacher of your craft. 👍🏾🙏❤️🇺🇸
Thank you so much! You saved the day. We got our new stove after disposing of our 12 yr old one and this is totally new design of course...I had trouble with the air shutter and figuring out how to adjust and u definitely covered everything. Keep up the great videos and shout out from Elgin, Texas
Great tutorial, I'll be doing the conversion as soon as I'm home from work. Thanks for the help.
Awesome video. It was precise, easy to follow and shot beautifully.
Thank you so much. You just saved my Christmas cooking 🥰
Thank you sir you saved me lots of time I thought that the pressure regulator by flipping over it needed some else but I see you just flipped it and that's it excellent explanation thank you again
Wonderful video. Great job! The tape idea is great. I used aluminum tape and shaped a cone to fit down in, with sticky side inside, so that if the part wanted to fall it wouldn't have anywhere to go. I used the cone on all the burners.
Thank you! If we can help you with anything in the future please let us know.
Thank you my man just bought used one for Mexico and will follow you video to do mine BIG THANKS !!!!!!!!
Very good explanation - thanks! Very clear and practical.
Thanks! was almost identical to my oven, have the JGBS66REKSS... great video!
Bravo! Awesome video was able to pinpoint problem and change our new (but a big box return) Oven over to LP. They apparently had our cooktop set up properly but not the stove which was so sooty you couldn't see in. Noticed after all that baking of "pandemic" bread our pans were getting black marks - and I Noticed dark shadowy marks on our walls??? What??? Yep!!! Carbon! Fixed! Easy! So easy this female, mid-aged, Realtor from Ohio just a few basic hand tools did it (alone, yes alone - no help other than video) in an afternoon!
was the oven making a "whoosh" or hissing sound when it was heating?
Excellent. Worked perfectly.
Thank you for the clear demonstration ..
Awesome video. Helps a lot. Thanks
I just wanted to thank you for this video. We actually completed the whole project and it works :)
Great instructions. Now I know to call a professional.
Great to have this on CZcams. It helped me greatly today. Cheers!
Great video, thank you 🙏
Thanks for the info, was almost identical to my oven. Had some trouble getting the broiler to light off but that one turn adjustment plus air valve fixed it! 🇺🇸🍻
Great video! Thank you!
I appreciate your video!
You are very welcome. If there is anything we can help you with in the future please let us know.
Thanks for the help,,, Great video!
Thank you, very clear instructions with good video. Much better than the install guide.
Very good...very good!!!...
Was a tremendous help!!
Great video very helpful
Thank Youuuu Great Video lots of help
Thanks you saved me a lot of trouble
You are welcome. Glad we were able to help you. If you need help with anything in the future please let us know.
Some surface burners have different sized orifices, ie. Smaller sized burners to larger sized burners. So pay attention to the directions. It may have a graft showing you the BTU’s of each burner and the right sized orifice to use correspondingly. The size of the orifice is stamped into hex nut side and it will be a number.
Excellent!
Thank You.
Very helpful!
Great tutorial
Gracias muchas gracias y bendiciones
Very good video thank you so much
Some of these oven have a metal pan underneath the metal bottom after it is taken out. This requires doing half the steps from inside the oven and half from underneath by taking out the bottom drawer.
I’ll show you a little trick. Gotta love the accent.
I have JGB620REF, is it the same? Thank you! Your post is really helpful
Here is another hint. Our double wide came with the gas stove installed new. We didn't know but the LP Conversion Kit was in the plastic bag, taped to the back of the stove, and when we bought a replacement years later, it also had the LP Conversion kit taped to the back of the stove. Not knowing you would buy the 50 dollar kit when you purchased the stove not needing it, as the jets out last the stoves. So check yours when you purchase the stove.
Model JGBS66DEK4BB
Just found out all the LP stove top burner fittings are color coded. I can’t see any color difference on them. I look further and supposedly they are etched for correct placement. Nothing on mine.
It also says in the manual converting the oven burner this product cannot be converted to propane by adjusting the oven orifice. orifice must be replaced for propane.
Wow was a little more involved with flam adjusting. But still your video was extremely helpful.
On the safety gas valve, when I tried to turn it a full turn is was already so tight I couldn't turn it. Is it possible that is the reason I'm not getting any gas to the range?
Hi! Loved the video. Converted my GE and it worked really well. I have one question though. I have model jgsp28sen1ss and the broiler is controlled differently so it didn’t get adjusted and has super long flames. How do I adjust that one??
did you ever get your answer
I have a brass piece about 3/4 do an inch long that you didn’t have me install anyplace. I think it’s for the oven and was Togo where you had me just turn the piece over.
Did I do something wrong?
I wonder if doing the conversion of orifices for high-altitude operation is similar - how about adding that to this video??
My GE gas range was switched to LP, but the flame is too high on all the burners. Can I adjust that??
no broiler conversion?? usually there is another orifice for the broiler but my kit didn't come with one. all the videos ive seen on this conversion did not show anything about the broiler
Great video. Was the original way natural gas? Converted to propane? Or the other way around?
Thank you. The original way was natural gas.
Does top burners have air intake regulator?
How do you adjust the broiler? My conversion kit came with 2 orafice for oven and broiler. I see you did not use them ypu just flipped it over correct?
What is the model number of your oven?
JGB281DERBB
I cannot find a conversion kit for my model
How did you remove the door? Mines not coming off
Mine has a lock on the hinges that I slide up and then when I open the door to lay flat, the door slides out.
@@cherylspringtime thanks!
Need help with model EGR3000ED3WW lp conversation kit like to know if you have it in stock
What about broil?
I'm assuming that converting back FROM Propane to NG just requires all these steps, but reversed?
U dont show the color for witch burning? I have white, yellow brown and purple, what each in the burning?
Witch burnings went out of fashion in the very late 1600's...
The colors for each are listed in the manual. But the colors can wear off; the orifices are also stamped with the size. Plus there is a stamp "L" for propane (LNG) or an "N" for natural gas.
My stove (slightly different; model JGBS66 ) has
small burner (LR) - 5000 BTU -- red/yellow - stamped 66L
med burner (RF) - 9500 BTU - blue/brown - stamped 89L
large burner (RR) - 12000 BTU - blue/magenta - stamped 99L
XL burner (LF) - 15000 BTU - blue/brown - stamped 114L
Center burner - 8000 BTU - orange/green - stamped 86L
Oven - 16000 BTU - pink - stamped 048 (much larger than the others)
My instructions also say "This product cannot be converted to propane by adjusting the oven orifice. The orifice must be replaced for propane". So check your model. This is different from the video.
This is a VERY important step that was completely missed in the video, especially for those of us that don't have the original instructions!
It's not necessary to disconnect the electrical connections inside the oven.
About how much does this labor cost?
I have 5 orifices plus 1 big orifice what do I do with the big one?
I think it's for the oven. I didn't see him change it.
I just installed the same stove you have. I’m not sure why he didn’t install the oven orifice, I did, it’s much smaller than the NG so I’m assuming should be installed.
@@jaredkobobel1107 yes I replaced the large one on the over burner and works great.
Check the installation instructions. If your oven came with it, you probably need to replace the current oven orifice. My instructions said "This product cannot be converted to propane by adjusting the oven orifice. The orifice must be replaced for propane".
This is different from what is in the video.
Aloha from Hawai'i. Hope all is being safe from the virus pandemic. MAHALO NUI LOA for this video, it help me convert my GE JGBS66REK355 - 5 Burner Gas Range to propane. I do have 1 question...I have a extra piece that wasn't used or replace. It looks exactly like the part thats located under the oven burner which was the one we had to turn a full circle. IS THIS OKAY OR DO I NEED TO SWAP IT OUT? Thank you for your kokua. Malama Pono.
Yep, I also have the extra piece.
Who can I contact in Morris county new jersey
The sizes aren't the same for every burner. Should really explain what new lp orfice corresponds with the natural gas equivalent
You should of mentioned some hot point models need the oven orifice for changed 10:08 otherwise 🔥 will be a great fire hazard.
I don’t know what I did wrong but my flame is still huge and red.
What is the model number of your appliance?
He do not show right one each burning.
Why didn't you change the bell orifice ? All you did was tighten it . Why did you unplug the wires ?
I do apologize but what is the orifice that you are referring to? Our videos are to help give you a general idea on how to do your repair. The wires got unplugged so that it was easier to get to the one orifice. Sometimes in the oven you just have to adjust the orifices instead of having to change the orifice out.
@@appliancepartspros no need to apologize your video was very helpful . But at the 10:10 mark of the video you tightened up what you referred to as a " bell orifice safety valve " but didn't change it . If it didn't need to be changed as you said it didn't , why did it need to be tightened up if it was a new stove
If the stove was natural gas before switching it to LP then that could be why you are needing to adjust it instead of replacing it.
@@appliancepartspros thanks
You're obstructing the view with your giant gloves!
there is also a lot of sharp edges in there
3:45 As a "PRO" you really should emphasize starting the threads straight to avoid cross threading, particularly with brass fittings. "Do not over tighten, you don't have to" ...Umm, good to know.
Hey, next time use boxing gloves so I can better see what you’re doing!
Horrible information here! You completely skip the facts that each one of the burner orifices have different sizes and placing them in the wrong one can cause serious issues! You also didn't show that the orifices in the ove N also need replaced. They done work just by doing what you did here. You are going to get someone seriously hurt or killed!