Axiom CNC Training and Tech Tips (4th Axis walkthrough) Getting started with rotary.

In this longer Training we will cover how to set up and run a file on the Axiom 4th Axis kit.
The 4th axis kit can be added to any Pro V5, V6 and Elite machines. Expanding the capabilities of your machine.
Learn More: axiomprecision.com

[@mackholman8042]

Great video need more like that

[@N4CHO_]

Thank you for uploading these training videos. They are very helpful.

[@m.c.4574]

I will make a block 75MM set it on the machine bed and touch off the tool from the top of the 75MM block. Unless you can think of a reason that would not work?
Thanks fo the videos!

[@AxiomprecisionCNC]

That would work. We have many customers who have created their own fixture for that use.

[@sd961960]

Can you possibly give the part number and name for the 1/2 inch bit you used in the video?

[@AxiomprecisionCNC]

In this video we used two bits. Roughing: Amana 1/2 core box AM45932. Finishing: Amana 1/16 Tapered ball AM46282.

[@sd961960]

@@AxiomprecisionCNC thank you very much… The video is most helpful

[@sd961960]

@@AxiomprecisionCNC Can you please double check that part number for that 1/2 core box bit? Amana does not have such a bit with that number on their site.

[@WolfSong-nm8vy]

Thanks for the video. I'm using UCCNC with Vectric software. Would I incorporate the Z offset of 75mm into the toolpath?

[@AxiomprecisionCNC]

I don't believe you will. You will set your Z zero at the machine side and use the offset there.