I built a MASSIVE LED Warhammer staff in 10 days!
Vložit
- čas přidán 2. 06. 2024
- To support our project, check out Warhammer Age of Sigmar: Realms of Ruin: ins.deals/kamui_ror
For the release of Warhammer Age of Sigmar: Realms of Ruin Frontier asked us to bring the Staff of the Tzeentch to life! I wanted to craft everything only using foam and some PVC pipes, plus, I wanted to add all the LEDs and the design was super challenging! This prop is the largest one I’ve ever made and I love how it turned out! Hope you’ll like the full crafting video!
- Svetlana
This video is a paid ad with @PlayRealmsOfRuin
Learn how to make costumes: www.kamuicosplay.com/books
Like our videos? Support us: / kamuicosplay
Recommended Products for this project:
FOAM:
EVA Foam: amzn.to/47KqE5K
Box Cutter: amzn.to/2ru1j1U
Contact Glue: amzn.to/3aBOML0
Squeeze-Bottles: amzn.to/2NKLfPC
Dremel: amzn.to/2L7pkDG
Dremel Snake: amzn.to/2IP1IyK
Hot Air Gun: amzn.to/2IP12tc
Flexbond: amzn.to/3aoAME5
LED Foam: amzn.to/3u3gorK
PVC Pipes: amzn.to/3vDnJyq
(use non-toxic, unplasticized PVC pipes when you want to heat them up!)
Whetstone: amzn.to/2KtAeEq
Pattern Notcher: amzn.to/2TyH6lJ
Hot Glue Gun: amzn.to/3SrLCRB
SAFETY:
Dust Mask: amzn.to/2IpB0zF
Respirator: amzn.to/2PUNd2N
Safety Goggles: amzn.to/31FOxup
PAINT:
Airbrush Set US/CA: amzn.to/2H8qiMK
Airbrush Set EU: amzn.to/33BxevG
Water Filter: amzn.to/2xijYAv
Cleaning Station: amzn.to/3cEUVHR
Vallejo Model Air Paint: amzn.to/2KOT3iB
Vallejo Game Air Paint: amzn.to/3S47O3T
Airbrush Cleaner: amzn.to/2THqYhH
Masking Tape: amzn.to/2UH85uN
Flexible Masking Tape: amzn.to/2V2EcaN
LED:
Wire: amzn.to/3ma5gz8
LED strips: amzn.to/3HosZc2
Soldering Iron: amzn.to/2IhJpV8
Lead Free Solder: amzn.to/3gAaYt9
Slide switch: amzn.to/388tDHQ
Helping Hand: amzn.to/38rmReX
Heat Shrink Tubing: amzn.to/2JQiLa0
Solder Fume Extractor: amzn.to/47JCddD
Feather M4: amzn.to/429TcV2
PropMaker Featherwing: amzn.to/4b8ax5c
Lipo Battery 6600mAh: amzn.to/2vyVm65
OTHER:
Blender: www.blender.org/
Laser Cutter: amzn.to/38AbDVS
Our Laser Cutter: fas.st/t/Br5VDNRv
Super Glue: amzn.to/2Zya0Gm
Neodym Magnets: amzn.to/3htv0nG
A3 Paper Printer: amzn.to/48YRXKK
Our CZcams filming equipment:
Canon R5 DSLR: amzn.to/3S5Kumq
Canon RF 24-70mm F2.8L IS USM: amzn.to/3vNcofy
Camera screen: amzn.to/47DUtVK
Sound: Rode Smartlav+: amzn.to/2VtYTfU
Rode Wireless Go: amzn.to/2KvAD6Z
Rode NT-USB: amzn.to/2XW7klX
Smartlav+ to transmitter adapter: amzn.to/2yD59ct
Artlist: artlist.io/artlist-70446/?art...
Lights: Studio Lights: amzn.to/2VR0lYS
All Amazon links are affiliate links that we get paid for if you buy a product. You can support us by using these links. Thank you!
0:00 - Intro
1:37 - Planning
2:43 - Base Shape
6:54 - Adding Details
9:17 - LED foam
12:03 - Painting
14:59 - Finished Staff
16:20 - Outro
My favorite cosplay material shops (links not sponsored):
Europe: cosplayshop.be/
USA: www.cosplaysupplies.com/
Australia: www.luminsworkshop.com/
A list of worldwide cosplay shops: www.kamuicosplay.com/links
Video edit by @GeekingJay
___
► Socials:
WEBSITE: www.kamuicosplay.com/
FACEBOOK: / kamuicos
INSTAGRAM: / kamuicosplay
TIKTOK: / kamuicosplay
TWITCH: / kamuicosplay
#Sponsored #RoR #Warhammer - Zábava
Love your work and appreciate you reminding us that we all are capable of making these things with practice and time.
Thank you and agree so much! 😊
Just incredible! While I'm not ready to approach this level of a build quite yet, it gave me a bunch of inspiration to work on my trident for my Sidon cosplay! Thank you for all your hard work
Woah, that's amazing! Good luck with your Sidon cosplay!
Thank you! I'm going to need it but I'm excited for the challenge@@KamuiCosplay
The magnum opus is finally here, yassss!! This came out so amazingly, even if it is a little wobbly 😆🩷🩷
Amazing!
I think a little wobblyness was a good trade off to have it light up 🤩
And I really appreciate that you took the time to point out that you've been doing this for a long time and have a lot of practice etc. People are usually quick to call stuff talent when its actually hardwork and effort.
Don't care about the wobble - the staff is BEAUTIFUL!!!!!! Amazing!!!
That’s so coool!!! I already started my Etsy shop and made an axe and 1 helmet that I sold to a friend :D
Thanks to you I got the inspiration I needed to start my business,people said that I wouldn’t go anywhere with Cosplay but I hope I do
Every new project you outdo yourself! No exception 🔥
beautiful build! and the recreation of the game at the end was hilarious 10/10
It's... so impressive. I can't imagine how hard creating those shapes should have been. well done.
The LED work was just **chef's kiss** awesome! Loved the light effect when it is shaken.
Props to the Corgi Squad!!! 😎
Awesome the tzeanch will be pleased. Cool piece.
Hi Svetlana. great work that you do. One detail: if you want to bend pipes and not wrinkle them, like let's see in the minute 3:22 on the video, you should put sand inside.
Regards from agentine patagonia..!!
I like how the Tzeentch symbol at the top of the staff uses the clear acrylic between the parts of the symbol. It gives off a cool floating effect. Great job! As a fan of Warhammer since 2001, this is one hellova creation.
Another amazing prop. You guys do such incredible work together. I love everything you do. Thank you for your passion for your art and thanks for sharing with us!
You and Benny compliment one another so much. The staff is awesome looking and all the work really shows. Great Video Bud.
I loved seeing how you wired the leds underneath the staff and hid the battery pack it gave me so many ideas for my next prop!
Absolutely Amazing work!
To stiffen the shaft, you could cut another tube in a y configuration ( three pieces) and glue them to the shaft on the outside but the outside diameter will be greater so will have to have an additional piece to fill in any gaps that you incur, great job it really turned out awesome.
Wow! I love the light design and how you integrated it into the whole design of the piece❤🇨🇦
great job on the build I particularly like the translucency you got.
It's weird though seeing something that has clearly been designed to work at miniature size scaled up to human size without any corrections.
So cool I love your work
I’m just amazed every time by you two’s fantastic work. ❤
I'm not sure the Emperor would approve, but Horus does :D
The floating parts look amazing. Great solution. Corgi corgi.
It looks so cool! The crystal effect is perfect ❤
Thank you very much!!!
Spectacular, inspiring work
Thank you for you work ! You give me so much idea !! I can't wait to test ! (I appreciate the little reminder of hw long it takes to build those thing and that you have 20 years of cosplay behind you, it's reassuring !)
corgiii!!! No but seriously I love your LED, it just gets more and more amazingggg
fantástico, ficou incrível ❤
Your videos are always a joy to watch ❤ thank you for giving us quality content 😊
Corgis! how awesome & smart teamwork to engineer it to assemble/come apart
Looks amazing! An idea though next time you do something like this to reduce the wobbliness see if you can insert and glue a smaller diameter PVC tube inside, that should help stiffen it up without adding too much weight and keeping it hollow for wires, etc.
Amazing work as always. Looks so good
The only thing I cant seem to do is work with EVA Foam, more so cutting into it like you do. My knife is sharp, but not sharp enough I guess! But thank you for all the tutorials and motivational words in your videos. It has made my first cosplay costume props so much more doable!
This is next level stuff. Amazing 👏🏻
Looks great well done to you both
Considering how much Warp stuff is channeled through that thing, it's no wonder it's a bit wobbly.
It turned out great!
Absolutely incredible 😮 😮😮😮😮😮😮😮
It turned out epic as always!!!
amazing work as always! you guys are the best
Corgis are amazing!
3:58 girrrrrrlll
AMAZING!!! 👏 👏 👏
hopefully this video will help me create my Kpop Twice infinity light stick cosplay with my knight outfit. Wish me luck this would be my second cosplay build and hopefully it come out as good as this build
WOW just WOW
I miss watching you guys. glad you're back❤
Happy to see you're still watching! 😁
That's the Svetlana we all love!
Why just get a scepter if you can get a two meter tall war staff? 🤣🤣
I usually follow the updates on insta, but he'll that was one impressive project 😳🤯
Yeah, it drove me nuts! So happy you enjoyed it! 😊
Instead of 'Maxiture' for big miniature, I prefer to use what Adam Savage heard and used when working on Star Wars Episodes 1 and 2 at Lucasfilm, Bigature.
i keep forgetting there's a non-40k version of the Warhammer series, and they got really cool staves :o
Amazing work you guys really killed it.
Even as a loyalist I'll have to give it to Tzeentch this time 😂
Definitely inspiring
Ever thought about manufacturing some LARP Weapons in your style with LEDs in it?! - I would consider ordering one... :D
OMg an actual video!!
Awesome!
I'm planning on finally making my own cosplays and I wanted to do an eliatrope from Wakfu/Dofus. I need to do their magical portals but I have no idea how.
Awesome work
Thank you! ❤️
MANY SO GOOD, BRO
So impressive.
Lol this woman is awesome in so many ways
Would filling the inside of the pipe with spray expanding form help stop the wobble and give the whole thing a bit more rigidity?
Nop, wouldn’t work sadly. 😬
dayum this looks absolutely amazing 😮 btw what gold paint do u use
Hello, next time try pink then use gold painting, let me know if its worked for you 🥰🥰🥰
Amazing
I would love to take that to a rave.
That is awesome
i misss "Buy my books!" XD hahaha
Soooooooooooo cooooooool!
😁Truly Beautiful & Magnificent work as always.😁
💖💖💖💖💖💖💖💖💖
🌟🌟🌟🌟🌟🌟🌟🌟🌟🌟
Thank you so much!!! 😊
@@KamuiCosplayYou're very much Welcome as always!!!😁😁😁
amazing!
I love this I wanna see you make a blood for blood gods staff :)
I’m so glad I found this channel. I’m just starting out with cosplay I was wondering if you did commissioned props?
Amazing work! I always come back to your channel as reference for my own props. I was wondering, why you didn't use COB LED strips since they are a bit easier to hid the individual LEDS?
I actually didn’t work with them yet and have no idea how bright or addressable they are or even I have the right hardware to control them. And I literally had only one week for this build, so no time for experiments! 😅
@@KamuiCosplay When you're on a strict time schedule, got to work with what you know best! I highly recommend trying them out and experimenting with them. In terms of programming, I believe the only difference is the LED chips are adjacent to the center LEDs in COB whereas in normal LEDs the chips are in between each LED. I've been able to program them using a simple RGB controller and even an Arduino mini
the only issue i have with my builds and the builds you did here is the wobbilyness of the middle of the staff. i wonder what can be done to stop that from happening. aside from like a metal bar that makes it so heavy. but that is a beautiful piece!
Cap any openings and fill it with epoxy resin.
Умница
Loved
Corgi squad!!
Svetlana basically has "svet" as a root part, which is translated as "light"
3:23
Please tell me the program in which they made the drawing for the staff?
Adobe Illustrator.
@KamuiCosplay i was wondering if you have another link for the led strips on amazon you would recommend the link you have doesnt exist???
also will you making an updated vid just for using the program and adafruit trinket, I've bought all the books that you have on led and led for beginners and they are mostly using the arduino chip
Is any way you could fill these pipes with sort of cement so its not trembling anymore?
Nop, wouldn’t help! 😬
So now you made the lizard mage cosplay to go with?
the led foam from the link is the description is out of product since a while :(
Corgi ^^
ive got a friend that fucking loves warhammer and wants to buld a disciples of change army, so this got immediatly sent to them lol
❤❤❤❤❤
Ich bekomme das nie hin mit den Rohren. Wenn ich die biegen will dann bleiben die nicht in der Form oder knicken 😢
corgi!!
Corgi!
So, You could do any cosplay and went with a staff for mutated bird/god, istead of, I dont know, Neferata, Morathi, Alarielle?
I was asked to create specifically this weapon! 😅
I can't believe u weren't asked to make a cosplay from Honkai:Star Rail
Interesting.
its amazing, i realy realy love the light effects thanks to all for the hard work
Happy to hear you like it so much! 😊
1 props from warhammer 40k pls =D
A corgi is a type of dog.
Corgi ftw