Hubsan h109s pcb Replacement
Vložit
- čas přidán 20. 08. 2024
- User request video on how to change the pcb ,Video's were made with old video files . so I could not edit and replace parts of the video with any mistakes .
Also my compass and gps were both fried so they both needed to be replaced.
www.banggood.c... //hubsan h109s
AWESOME!! Thank you so much for uploading this. The soldering techniques were extremely helpful.
thanks for taking time to leave a comment .. CZcams not notifying me of comments again ..
Bonjour, j'aurai une question si quelqu'un aurait un cablage ou l'ordre des fil du moteur sur l'ESC, Merci pour hubsan h109S.
hola necesitaria saber si tiene el diagrama de la placa porque mi drone le pongo la bateria y no enciende nada no se que puede ser
Hi i don't have diagram , might be a bad port or bad firmware
Hello, I need a H109S body shell, one of my motor mount brackets broke and I can't find a body shell anywhere. Just checking to see if you might have one by chance or know someone who does. Can't find them anywhere online. Thanks.
i tried to look around as well and i could not find anything on ali or ebay .. you might have to epoxy it back together .. or look for a entire new shell from a diff company and move it all over..
@@ModItBetter It's beyond epoxy, tried it and it just didn't work. Thanks for checking though.
Bonjour j'ai une ?
Qui aurait le cablage des couleurs des moteurs sur ESC merci
Question, what are the square tan parts on the back of the PCB. I fried one and need to replace it. Plugged the power cable of a Walkera gimbal and it smoked immediately. That tan part is blacked but the rest around it seem OK. The part has 107D on the top and 411C0 below that number. Is it easily replaced? Any idea if I need to replace other parts around it? Seems like 4 solder points. Thanks for the help.
I think what your talking about a capacitors and yes you can replace them if they are shorted out or blown..
so what i've seen is they are 20v 100uf capacitors .. so you could try using just a normal capacitor as well to see if it fixes your problem.. here is a link to some .. I have not ordered from this seller its just a example
www.aliexpress.com/item/32832074923.html?spm=a2g0o.productlist.0.0.4d8c5980mrTMqj&algo_pvid=549dbcbf-e827-4d06-8ec1-e6674965cd93&algo_expid=549dbcbf-e827-4d06-8ec1-e6674965cd93-7&btsid=0bb0624716020834446464755eeb9e&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
errr i should note , when I say you can use a normal cap I just mean like a can type capacitor you find in most stuff with the legs.. just make sure to solder the right polarity to the pads
@@ModItBetter Thanks, after some research I found they were 100uf but couldn't find the voltage. I don't see any polarity marked on them, even on the ones in the link. Does it matter which way they go in?
@@dhoser9296 yes it matters treat them like a diode where the (red)line is on the surface mount is the positive connection/Pad... so on a typical can type .. one side is marked (- - - - - -) for negative on one side .