Friendship bracelet part 3 (adjustable loop closure)

Shows how to use a single loop at the end of a bracelet to make a slidable, adjustable knot closure that that holds firmly in place, yet can easily be removed.
Thanks for watching my video!
Click on 'loopbraider' under the video to see my other videos.
Check out my Loop Braiding website/blog for more tutorials, photos, general info:
loopbraider.com/ (homepage)
loopbraider.com/tutorials/ (links to the tutorials)

[@jamiec8]

This is a life saver, now here’s a time saver 0:46 - 1:02

[@babyjack0000]

J C thank you!!!

[@carolinedull]

Bless your soul.

[@jennguyen4549]

Caroline Dull c.

[@Kathy-pj2gx]

Thank you!! I’ve watched at least 15 other tutorials so I could finish off my braided bracelets & this is by far the easiest and most clearly explained one!!! FINALLY!! 👍🏻🥳

[@NellyTessers-kr9yr]

I AGREE!! 😅

[@avedimond877]

EASIEST TUTORIAL OUT THERE!!! SO SO GOOD!! IF I COULD PAY YOU I WOULD!!!! IVE BEEN STRUGGLING SO HARD UNTIL THIS MOMENT!!! $$$

[@hsuns]

i understand exactly what to do but its not working

[@aminamurgic88]

hanna I have the same problem. I did it once before and now I can’t do it it just twists the loop

[@rileycoughlin4003]

me too! i did it the first time but can’t noe

[@lina-pp1rn]

hanna that happened to me and i think i figured it out? k so like when you after you make the loop and put the ends in you need to tighten the loop right away without pulling the whole bracelet through it again. sorry im bad at explaining but i hope this helps?

[@marytran4015]

Same. I did the loop but it didn’t really make since when she did the knot or something, so I did it my way

[@vianeyreyes8630]

lina thank you thank you thank you ❤️❤️❤️❤️

[@sadiae6631]

THANK YOU SO MUCH. I have been looking for your video because I had forgotten what it was called.

[@heartenedhalo505]

Thanks so much my aunt threw a party for my lil cousin and she ordered some bracelets and nobody knew how to tie them

[@randomasmr1038]

Thats y i came here 2

[@gracerhodes1125]

THANKS YOUR A LIFE SAVOR😂!!

[@annaedwards7564]

For anyone who is confused, you put the bracket through the loop, then you don’t JUST pull the end through the loop you made, you pull its through the beginning bracelet loop. :)

[@allison83628382637]

Thank you!!!! Sorry that you received hateful comments on this video! This really helped me figure out how to make the bracelet stay without being permanent!

[@madamehuman840]

Thank you so much!!! I tried watching other videos but yours made it clear what to do. Thank you!!!!

[@dragonjoy1313]

BRILLIANT! I'm a newbie and I've been looking for a way to have adjustable bracelets so I don't have to stress sizes. Plus this is much neater looking. Thank you!

[@jaslene1132]

all the other ones were so complicated and thankfully i came across this one! you’re a lifesaver!

[@Riyko22]

Tysm! I ended up naming a bracket for Father’s Day ❤

[@mrm9678]

Thank you so much, your video is the only one I can find that words this in a way that make sense

[@kiki-shape]

this is the only video that makes sense to me omfg thank you

[@DogPooOnYourNewShoe]

Thanks! I got a pack of five simple friendship bracelets as a gift. They had no loop or anything, but I could make one and use this method with it! It works great 😃

[@randomasmr1038]

My bf made me a "friendship" bracelet and i couldnt figure out how to put that mofo on

[@anni_ie991]

Best friend or boyfriend?

[@deanotyl4802]

@@anni_ie991 best friend I think. If it's her boyfriend, then he might have friend-zoned her by accident 🤣🤣

[@anni_ie991]

@@deanotyl4802 that was what i was thinking 😂 but it says "friendship" with "" idk

[@nataliemajano9030]

Random ASMR HAHAHAHA

[@AmyLooHooo]

Very simple, but would never have thought of it on my own... thanks so much for sharing!!

[@erinsmith2950]

Thank you so much been trying to figure this out for ages ♡♡♡

[@abbynormal4740]

THANK YOU!! You are so right about this being so easy to do but also easy to forget.
I made a sampler double wrap (on my wrist) lucet cord bracelet with a simple loop end but before deciding on a closure, hubby decided he really loved it. Of course, the bracelet is too long to go around his wrist just once but too short for a double wrap. So, this lark's head knot closure is ideal, but I always have to find your video to remember how it works. Maybe next time, remembering "lark's head knot" will ring a bell. Lol :-)

[@elizabethbriones8913]

THIS PERSON
IS A GODSEND

[@editingvs5030]

OH MY GOODNESS YOU SAVED ME! thank you so much!!!

[@peachytwinkles1416]

aw thank youu I was figuring out my adjustable strap because the starting knot was too big, you save my bracelet!

[@ShaneDuan]

Why did I not come to this video earlier?! Thanks - this is exactly what I was looking for!

[@aseeltalouli5635]

i cant express how happy i am to have found this video. i havent seen this technique anywhere else and its a life saver!

[@loopbraider]

Great to hear!

[@loopbraider]

Thanks! it's so simple but great for a quick easy bracelet closure.

[@conradhomestead4518]

Thank you this was helpful.

[@charisdrain]

Thank you I've watched so many other videos on how to do this but I could never do it, but following this, it seemed easy. I finally did it !!!!!

[@ashfire1744]

Wow this was so simple and perfect. Thank you.

[@datinyone]

amazing!! so simple, yet brilliant! thanks for this!

[@miasrandom]

All the other videos weren’t teaching me but thankfully I came across this one!

[@ellahehe9066]

thank you super helpful

[@jnrbarber]

Thank you for sharing!! I was clueless before :)

[@deborahlee7975]

Thank you - that worked like a charm!

[@vvv-hm8fd]

This works so good with just one try haha thank you

[@beaniebabiescollect3033]

Thank you for this now I know an easier way!!!

[@morgancurrie4747]

Great!!! I make bracelets all the time... and could never find the perfect closure... this is it! thanks so much!!!

[@sunny-4549]

thank you, i bought one at a gift shop and had no idea how to tie it

[@loopbraider]

You're welcome and thanks for the notes!

[@ChangminOsaurus]

You're a lifesaver! Thank you!! :))

[@electricisnotonfire_4078]

This helped so much thanks 😊😊

[@abigailvitolas2529]

This is an amazing video it helped me so much !!!

[@gabyd369]

thank you this is so simple!

[@Jason_Hermann]

This is the perfect solution for me, thank you very much!!

[@_gracie_3159]

OMG YOU ARE A LIFESAVER!! Thank you so much!

[@celiacaii]

thank you so much for posting this!! It's really helpful :)

[@racheldennison8839]

I'm still confused

[@loopbraider]

Sorry - about what? the video or one of the comments?

[@racheldennison8839]

The video. Sorry, I am a slow learner

[@loopbraider]

Surely you jest! I over-explain to the point that many well-meaning viewers feel they should do me the favor of giving me helpful criticism. (they must think I'm making braiding tutorials for fame and fortune!). In case you are serious: try pausing the video and replaying whatever you don't get. Or search around CZcams - by now I'm sure there other videos out there by commercial uploaders who've improved on this one. Good luck!

[@twitchster77]

I think she was having a bit of trouble with the step at 00:55...when you put the bracelet through the loop, and pull it all the way through the loop...you start back with where you started with just the same loop.
In case anyone else ever gets stuck on this part...don't pull the bracelet all the way through the loop.
Notice how little of the bracelet she pulls through the loop at 01:03. She only pulls a little bit of the bracelet through.
This creates a big loop...and that big loop is where you put your hand through.
Hope this isn't confusing!

[@twitchster77]

Oh! Or maybe she was confused with the very first loop you show at 00:03?
Here's the video I learned from. It's a very short, to the point video that does a good job:
---Well shoot, I can't leave links in the comments for some reason.
Do a search on youtube of "DIY Easy beginning LOOP for friendship bracelets" The top result should be the video I'm talking about. It's only about 1 and a half minutes long.

[@loopbraider]

You're welcome, glad you can use it!

[@loganf26]

Thanks for the advice!! I've watched two videos and both of them didn't work and your method did so thanks

[@cleomarie2526]

This is so helpful! Thank you!!

[@bakingtimewithlucy8151]

OMG YOU ARE REALLY A LIFE SAVER I THOUGHT IT WOULD BE HARD BUT IT TURNED OUT AMAZING THANK U 😁☺️

[@pauldavies9798]

brilliant! just what i was looking for!

[@erinparker8742]

Thankyou so much for the help yours is the only good tutorial on this type of bracelet closure ❤️

[@rviyaber7452]

Thankyou! This is so helpful

[@emilylin540]

soo helpful ty!

[@stefiec6821]

i can’t see anything in the video and don’t understand what she is talking about // no hate just saying

[@elisebenson6385]

So helpful!!! Thank you

[@noah3465]

Thanks for this it helped so much

[@arschkalt2348]

oooooooh NOW i get it! thank you, i couldn't figure those out lol

[@alanaglover6458]

THANK YOU 🙏

[@farhatkhan7940]

Thank you so much 😉

[@ashleymadison6518]

Thank you so much for this!

[@Hooyag]

Thank you so much! It help a lot. ❤️

[@adamz7755]

This was very useful thx!

[@saratfkh8227]

OMG!! This is awesome! Than u sooo much

[@kth6854]

Thanks, its easy and works well!

[@theorganicyorkshirerose]

Super helpful thank you!

[@kathleenharris7456]

thank you, this was very helpfu!

[@rakshapatel5584]

thank you soo much..I have been trying to figure out this sliding knot on these type of bracelets from soo long time..and now finally.. thank you :)

[@Allie-dg2wd]

Thank you so much ! Helped a lot 💙💙

[@haritapatel6402]

Thank You! That was very simple and easy, It really helped

[@loopbraider]

Harita Patel You're welcome!

[@lesaztec5]

you the best! Thank you

[@loopbraider]

You're welcome! thanks for the note!

[@haileynapolitano4157]

Girl thank you sm so useful

[@aliahaliah5298]

you don’t know how frustrated i got when i couldn’t figure out how to tie my bracelet, thank you so much

[@lucci6965]

THANK YOU GRANDMA 😘🥰

[@kalynschreter1552]

Thank you

[@meliB32]

Love this and so simple and neat instead of a bunch of loose strands. Perfect thank you for this!

[@kial3145]

this was a huge help🤗🤗

[@HyDrzZ]

Super helpful compared to what many say in the comment section! Thank you!

[@loopbraider]

Thanks!

[@annienoel5571]

genius. thanks so much!

[@user-ff6qm3fi1x]

Thank you :^) So simple and sweet!

[@loopbraider]

You're welcome!

[@xydejesus2126]

this saved my day 5 minute before im like stressing so much how to do it and how it's finally solved

[@rakshapatel5584]

thank u soo soon much! I was trying to figure out this sliding knot on these type of bracelets from soon long time an now finally...thank you:)

[@Dev-qi3bv]

Thank u soooo much this was a great help

[@Lillia_Cre8tiveConnexions]

Why did I not think of this ? I do Kumihimo braiding on a disk and use the loop ending with a button to fasten, but if making for someone and I don't have their wrist measurement this will be excellent. Thanks !
What do you call this technique of braiding ?

[@cdcreww1070]

Thank you it worked!!

[@lylahduffer3482]

thank you! I just had trouble keeping the embroidery floss tight! but overall this was helpful!

[@juliaclarke4411]

thank you so much it worked!!

[@breanneanderson7332]

This is perfect! Just what I was looking for. Thank you so much for sharing. I tied a couple of knots where I wanted the bracelet to end and then cut off the rest so there was no fringe.
ps. Every time I watch this and hear "lassOO" I laugh a little bit lol

[@loopbraider]

Hey, that's the way cowboys say it! It's only greenhorns that say LASS-oh!

[@breanneanderson7332]

Really?? Well I'm obviously not a cowboy lol

[@soqhiaa]

for anyone who can’t do it: once she has the loops all done and stuff, follow exactly what she does to tighten the knot. that’s where i had problems because the knot would come undone before i could tighten it

[@SkiaRavensong]

Thank you this is awesome

[@archiegoddard4465]

Omg this was so helpful thank you so muchhhhh

[@thesextonsisters864]

THANK YOU SO MUCH.

[@loopbraider]

In response to a recent comment that I guess was removed since I saw it:
If you make bracelets that are a lot wider than the one in this video, you can definitely find a way to start them with a smaller no. of threads (for making a not-so-hefty-sized loop at the start of the bracelet). It's always possible to make a delicate loop and then ADD more strands to continue with making a wider band. It's trickier and more time-consuming to taper off the number of strands at the end. But that's not really necessary as long as your starting loop is big enough. Just make it long enough that it can wrap around and hold onto the end of the bracelet of whatever size...

[@angelinaromero417]

How do you get the loop at the beginning?

[@user-eh1pf4wp1g]

Thank you so much!

[@justmadeit2]

Cool. It works, thanks

[@sophsophAJ]

Omg a big thanks to you!

[@uhppy1388]

Okay I did it 😂 after 20 tries

[@ericayeung662]

Perfect!