Major Update on the Euro Competition E36
Vložit
- čas přidán 22. 05. 2024
- The guys have been making some serious progress behind the scenes and I wanted to bring y’all up to speed! Ever $5 spent on LZMFG.com or DriftHQ.com gets you entered for a chance to win a Podium1 Ultimate Simulator valued at over $50,000.
- Auta a dopravní prostředky
100% would love to see you in a real rally car.
DO IT.
Yeah fr, that would be dope, maybe a 5 cyl audi? 👀👌🔥
With his back problems. Probably unlikely.
@@2jyeti909 if his back problems are anything like mine but, and from the way he's described it in the past I think they're probably pretty similar, big impacts and rough road aren't the problem. It more stuff like bending over at the wrong angle, lifting heavy stuff, reaching stuff on high shelves and stuff along those lines.
More like a rally 4 ford or something is the way to go when starting out in rally
he should try richard burns rally first!
Id love to see you do rally stuff
Johan is so talented now. He has turned into a master craftsman.
I’ve always thought Adam would end up in rally. He seems like a natural!
Well Kalle has been driving rally for what, like almost 10 years now? (basically since he was a kid)
Yeah like Ken Block! (RIP)
He crashed out all the time and he could out drive Adam on his worst day! Rally driving and fast Rally driving are 2 different things!
Yeah that level of train has passed already :D@@skiysi4
@@Quagmire925ken was good in US rally but i he sucked in wrc cause wrc drivers actually gave skill unlike ken who just had money to do rally
Travis Pastrana would be someone for him to vollab and learn rally from
If I’m ever 1/10 the fabricator Johann is I’ll be happy
Imagine a rally collab with LZ and Pastrana
LATVIA! LATVIA! LATVIA! :D
I can't believe you're working with Kristaps, to make well technically a EuroFighter as he did.. hella lit adam..
I’m definitely seeing the RTR technology influence on the e36 build. I admire how smart everyone in the shop is.
Seeing adam in a real rally car sounds like a fantastic idea
"Older cars have thinner metal" my 1964 p4 Rover begs to differ 😂
Just got into vacuuming my wet carbon layups and it makes alot of difference with the final product, tell your carbon department to take a look
Stepping stones.
Amen vacuum bags are cheap as chips and make a huge difference
Way back when you and Jimmy did the rally Subi's I legit thought you were going to go the rally route for a little bit, even when you went up to that rally school thing. Would be sick to see you venture to that. There's nobody in the space that has produced rally content on top of what you already have and do.
Imagine if the simulator's co-driver voice was the "YOU GOTTA LISTEN SAMMY!" voice😂😂😂
SAMIR YOUR BREAKING THE CAR SAMIRRRRRR
I’ll say it every time I get a chance to. Johan is a fucking animal bro!! The ability on this man is insanity!!
Adam. I was looking at the rebuild of Mat Armstrongs 635 CSI on the Yorkshire Car Restoration youtube, and they powdercoated the entire car. All I can say is wow - its a great GREAT option and from doing only parts of my cars (because I don't have a full bake oven nearby) - it does hold up so well.
Adam, the level of car builds and manufacturing you have in house is unbelievable
It’d be a dream to play the way y’all do.
Please get into a rally car!
I wanna see the joy bro.🤘
Nice build guys , amazing how far drift prep has come over the years.
It also gives newbies a good standard to aspire to . Hopefully gone are the days of crappy preparation, leaky engines, dodgy wiring etc etc .
Being involved in motorsport for over 30 years mainly in rally and race the quality of build has come along way . 👍🇬🇧
really enjoy hearing johan talk about the work he does on the cars.
Loving that e36 Adam congrats on everything
Love the Rally Content!!!
Been waiting for this update.
Keep killing the game lzmfg crew!
Keep it coming, the more detail the better!
Good seeing Owen in the vids! Gotta’ get that guy out of his shell and love to see what kind of wild ideas he can contribute to Team LZ….better make an extra bash bar while you have the car apart lol
thats starting to look a beast love the fab work
Would be awesome to see a collab with Brandon Seminuk! He’d be great for pointers and getting you into rally. Not to mention the box/bike similarities and that being both your career starts.
I would absolutely love to see Adam try rally, also does anyone know what competition he’s competing in over in Europe?
Drift masters but I have a feeling that not full season.
He'll Probably come here a d do the Irish round at Mondelo because he's familiar with the track and it's the closest easy to fly to and he'll probably do Riga in Latvia it's a brilliant track James Deanes favourite
DMEC. Most likely not all races.
I have a feeling you and Chelsea may share the e36 for drift master events.. that would be sick to see similar to you and Vaughn in Fd
Highly doubt that.
@@gmula1987which part? Him sharing with Chelsea or him being in DMEC?
LZ awesome vid and that comp E36 is gonna be a top tier drift car and with you and johan and owen and the rest of the team doing the fab work its gonna be a fabrication masterpiece and all that carbon so sick 👌 an with the 2JZ an absolute beast i know with your eye for style and how you upgrade your cars its gonna be so sick i cant wait to see it when its finished and you shredding that thing 🤙 and as always keep up the great work 👍
Thank you for the upload. 🙏🏼 it was unexpected, so we appreciate it. ❤
great aussie company Adam their radiators are off the planet too cheers from down under
Been waiting for this 🔥 keep it up
Allready hyped to See u back at Drift Masters! And hell ya do some rally Stuff
100% Do some rally we would all love to see that, Feel like you'd be a natural at it and should for sure look into giving it a good go!
Rally let's go we all wanna see that you already know bro great video as always.
Great idea on Powder coating the e36 Adam 👍
i took this exact page out of the drift guys book for my e92 drag car. i cut the back of the car off, cut it down and acid dipped it. full oem e92 body made of carbon/fiberglass. looks like an oem e92 but only weighs 2420 with the built 8hp75, built 3.3l without cage. its pretty crazy how much faster the cars are when you take 1000 lbs out of them.
i used to work at pwr when they were called K&J thermal in currumbin, australia. Also got to drive Kee's AWD HSV monaro prior to him receiving it at holden. :D
they are definitely the world leaders in cooling tech now.
I currently work at PWR on the GC. It really has come a long way since the old K&J days. Kees still comes in and still works hard.
Some complain about the price, but they are also value for money when you have the right build and need all the cooling you can get for the space.
i love seeing those kind of videos!!!!!!!!!!!!!
For the fender I have seen people cut and bend the lower section in so it attaches flat in the wheel well, leaving the upper hanging or make a thin bridge to carry the wheel well lower to meet a splitter or lower trim (something like that). It is pretty aggressive looking imho and it does change the dynamic of the car quite a lot for being a "simple" mod, well, would be simple if using metal, then again, might be able to bend some of the c/k sheet because that stuff is pretty flexible.
Making a rally would be wild. I like where your going🔥🔥🔥🔥
Yup! 100% would love to see you in a rally car!
I look forward to the drift builds, can’t wait to see this ripping overseas! Will you be able to add power if needed? When I’m watching driftmasters it seems like some of the guy (piotr, deane, Shanahans, mckeever, and rovanpera, and a few more) are much faster than the rest of the competition and ultimately do better.
nice working with Latvian Kristap bluss for the body!!!!!
its cool
Was wondering about this car yesterday. Johan putting in work.
Love the content. Wish Cleet put out this much stuff.
Yesss to seeing you in a rally car !!!!!!!!!!!!!!!!!
Everyone who knows and loves a PWR products are good Australian quality. The Carbon Kevlar is crazy I would love that one my E36 or my 180SX it's been something I've wanted for years congrats for living my dreams 😂
can't wait for the next eps🔥
I love the fact that you Jimmy and Grant are build new car all at the some time.
Hell yeah would love to see you take on rally Bro ❤
So hyped for this build 😮
LZ rally driver for sure! I've been wanting to see that for years!
Much love to all you at Adan LZ
Adam, you should try to work with O 'Neil rally school in New Hampshire.
Yes! That place is sick
I meant to comment on the gtr video in Colorado, But it would be so cool to see you do some rally. I believe there’s a rally race series in the the north east! I feel like your drifting would translate well to rally!
Hey you and the guys do good work.
Happy to see a e36 getting spicy and it being meant for europe makes it even spicier. I will go to every event Adam races in!
The synth music is awesome
Adam in a rally car? YES! Like to see you going to DirtFish
Adam and crew, y'all rock! Would love to see you in a rally car. Peace
Hope your putting a good gas/oil fire suppression system in with that gas system in the car. Even with the box that kinda worries me
This is the build everyone wants to see
100% Adam should get into Rally. Arrive and drive to start… let’s goo 🤘
I’d 💯 love to see the transition attempt to rally, I’d love to see how many skills would transfer, also a massive test of bravery, how big are LZ’s balls?!?!?! (Love that scene from the rtr drift meetings)
You should totally start a carbon line. Could start with 'universal' stuff like splitters or spoilers that you can make molds for & pump a couple out a week to build an inventory. Then, start building a catalog from there.
You could cut firewall and push JZ further back to balanced out weight distribution, as there few serval race cars Supra had JZ engine pushed back
Donegal international rally is calling to you..
last or second last weekend of june and there is always a massive crowd, lots of cars of all kinds in or at and some more drift orientated events in the evenings (king of the cone or the like, more of a skid pad thing) lots of noise, 2 step for 3 days solid..
bit nuts but I'm sure with your contacts you could get a car and entry sorted pretty easily. Though as a novice driver(in rally) you may be restricted to 1.6 fwd or something like the crx.
100% want to see you go down the rally rabbit hole.. especially would love to see you in some momentum based cars (like the crx) and competing. Maybe a historic race?(those guys go hard)
Will you ever do klutch kickers again? Loved those videos and drifting!!
Love this video!!!!!
Yesssss!!!!! Please Adam !!!! Rally car!!!! A Celica gt-four?! I’m bias , I got one! lol
Yes on the rally car!
That sim looks so fun!!!!
Need to see Adam shredding a real rally car!!
Very cool build, but have you thought about putting fans infront ov the radiator so they push air threw it and then make two holes at the bottom of the shroud so all the smoke and hot air goes under the car? I have seen it on some DMEC cars I think.
Would love to see more rally content !
That 32 needs to become a full blown rally car 😍
RALLY ADAM WE NEED TO SEE IT
One of the Evo's would be awesome for rallying fun with anti-lag and sequential!
I’ve been waiting for Adam to get into rally! I know nothing about that side of racing but Would be cool to see him do what he did with drifting from 0 to wining a round in one of the most competitive series, but with rally
Great success
Very cool of Adam to let his team speak about the things they worked on when he could have easily just done the entire thing.
Sit next to WRC driver and get driven on some dirt road, that would be so sick to see… they are from different planet, crazy skilled dudes
More legend ❤
100% get in a rally car. Thought about you getting into rally or offroad racing for years
LZ i second to see you in a rally car it would be sick to see what you could do coming from drifting into rally cause they tend to slide those cars around alot also so you would probably be a natural 👍
Simulator is so realistic i had goosebumps watching it
I'd love to see more fabrication and car building as it happens, Yohan (sorry if that's not the correct spelling) is great at explaining things. Maybe a second channel that follows Yohan and your crew around closer to real-time? 🤔
Johan!!!
Seems like we havent seen much of johan lately, not even gonna lie, i been missing johan the master mechanic!! Good to see ya my guy!
Edit: BE CAREFUL. But get in a rally car!!!
I’d love to see you playing that simulator lol
Hi...Nice and fun, Rally Simulator, Building Rally Cars and Fantasticooo.. I Like Rally Cars 👍🌞
A backup camera and screen would be easy to mount for you guys, if your ECU doesn't support it, I'm sure you could just use a RaspberryPI or similar device.
maybe not necessary but probably worth it
The Diablo blade is the best one for cutting metal.
1) Adam get your a** in a rally car. That run was really freaking good for being nonchalant.
2) Look into autoclaves for your carbon fiber pieces when the quality improves. It will help to mass produce your panels so you can have more supply than demand.
Great video 😊
Definitely, rally Adam is a vibe...
I would suggest you take more ideas from the circle track world for bash bars. They have some good ideas for slip joints on the bars so it gives a bit before it bends anything.
rally is for all of the real drivers i would love to see you go nuts in a set up car
You should do a v mount radiator in the back, keep more weight there for grip
Man this build is a dime
So sick. Love a e36