Thank you for these videos!!! I recently had a 1500NEX installed. The installer was a whiz at the settings, but I forgot 90% of what he showed me. I will refer to these videos often. The 1500NEX is incredible, by the way. Thanks, Pioneer, for making a fantastic product!
You can find a full playlist of How To videos with very similar operation to Pioneer AVH-1500NEX here: czcams.com/video/hUAJPnvCMgc/video.html Please be sure to update your Pioneer AVH-1500NEX to the latest firmware. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-1500NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: czcams.com/users/pioneerelectronics
Please take a look at this part of the above video: czcams.com/video/Z86fQryoRVk/video.html There is an explanation of Listening Position as it relates to Time Alignment with the receiver. You can see the Listening Position settings as factory Presets for Time Alignment. When you go to the Time Alignment screen, you can customize the Time Alignment in the system to suit your needs. You can find a full playlist of How To videos about Pioneer AVH-2300NEX here: czcams.com/video/ObpKXwrN8us/video.html and you can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: czcams.com/video/ObpKXwrN8us/video.html You can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
You can find more How To videos about Pioneer AVH-NEX in-dash receivers in this Pioneer video playlist: czcams.com/video/ObpKXwrN8us/video.html and you can find more videos on Pioneer's You Tube Channel here: czcams.com/users/pioneerelectronics
A couple things i just want to make sure of. The crossover setting and the subwoofer setting. Entering both yield the same menu. Is their any difference in the two menus ? They access the same 3 crossover points and settings stay in both. I figured it’s just something to do with network mode Other question- on the high pass crossovers , do they only work if your highs are run on rcas or does it control the speakers if run off the deck?
On Pioneer NEX in-dash receivers, the subwoofer setting is simply a short cut to the main crossover setting screen. The crossover settings apply to the speaker level outputs as well as the RCA outputs. For example: the HPF on the Front will apply a crossover and slope to the Front Speaker outputs and the same crossover and slope will be applied to the Front RCA outputs. You can learn more about setting up Standard Mode or Network mode on Pioneer NEX receivers here: czcams.com/video/PeH_h8UHzBw/video.html You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: czcams.com/video/ObpKXwrN8us/video.html and you can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
So my previous one of these (maybe 4 years ago, same basic system) did not have a max volume level, but this one does (AVH-521EX). Is there a way to turn that off, or has some engineer decided what is "too loud" for our ears?
Do you have a question about the operation of your Pioneer AVH-521EX? You can find a full playlist of How To videos from Pioneer about EX receivers here: czcams.com/video/TzCGdtiSXec/video.html and you can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
I just installed W4400NEX in to my WRX 2017 limited with Harman Kardon using iDataLink Maestro RR. 2 issues I'm having: Please someone help. 1: I couldn't retain the factory USB on the arm rest. It shows, "HUB ERROR" on the screen when I plug in the Apple lightning cable. No biggy here since I use wireless Apple Carplay anyways. 2- This is my main problem- I can't barely hear the front speakers. Even if I use the fader to send all the signal to the front speakers, there's not too much sounds coming out front the front speakers. I double checked my connections and I did plug them correctly. Note: Since I am retaining the Harman Kardon amp, I don't need to hook up the speaker wires from the Pioneer main harness to the RR harness right? I just hooked up the front and rear RCA cables from the RR to RCA behind the Pioneer radio.
As of 2019, Pioneer in-dash receivers do not support a USB hub or multiple connections to one USB port on the in-dash receiver. Are you able to hear full range audio from the rear speakers in the vehicle? What happens when you fade to the front? Do the rear speakers lower in volume? Can you hear the remote caller on a phone call? I recommend to contact Maestro tech support for more information on connections to the integration system.
Deckerd Otto I figured it out if why there’s no sound coming out from the front speakers it’s bc when I removed the factory HU, the telematic unit was underneath the factory HU. The front speakers are connected to that unit. So I put it back, shoved it and hid it behind the dash, now everything works but it’s throwing bunch of error in the dash. I figured it out that one also, all the lights in the dash disappears when unplugging the OBD2 cable which is I don’t really mind not having all the gauges and whatnot. But now the problem is, back up camera no longer works. I ordered the 12-6V camera step down, hopefully that will solve the issue I’m having.
When I try to use the rca pre outs front or rear in standard mode at the same time as using the speaker out puts, there is no signal coming from the preouts. If I put it on network mode, it changes the speaker outputs to network mode also. Only highs going out the speaker outputs. This does not work for me as I need to use the speaker outputs for the car factory bose system. 2009 Mazda CX-7. Am I doing something wrong? Ideally 1; I would like to use network mode as I have after market tweeters that I have installed running on their own separate amp. Or 2; use standard mode keeping the speaker outputs in use for the bose system and using either the front or rear pre outs running to the separate amp for the tweeters. But no signal is coming out of them in standard mode. If I turn the unit up all the way and the gain up all the way on the amp, you can hear a faint signal. Surly I'm missing something. Rca connections have been checked and rechecked and the amp is a brand new pioneer 3702. Note: Subwoofer Pre Outs work fine Cheers if you can help me with this one.
What is the model number of your Pioneer in-dash receiver? Please clarify your question: Are you saying, in Standard Mode, you are getting signal from the RCA outputs, until you connect a speaker to the corresponding speaker level output? And only at that time does the RCA output stop functioning? And if you disconnect the speaker, the RCA then begins to function normally again? It's normal operation of the receiver for the outputs, both RCA and speaker level to change with Standard Mode or Network mode. In Standard Mode the Front RCA outputs mirror the White and Gray speaker level outputs. And in Standard Mode the Rear RCA outputs mirror the Green and Purple speaker level outputs. This is normal operation. If you are not seeing simultaneous RCA output and Speaker level output from the receiver something is wrong. If possible, I recommend to press the receiver's microprocessor reset button. This may correct the situation.
Hello, i have interesting problem. my SMART SYNC APP , doesnt save settings, when i press Save Settings, it shows that it saved press OK. when i turn off my car, and turn on, the SMART SYNC APP is back to default, and the "Load" is greyed out. ? :(
What is the model number of your Pioneer in-dash receiver? Pioneer NEX in-dash receivers have 3 sets of RCA outputs for operating external amplifiers. You can see it here: czcams.com/video/s-RuRzsRfE8/video.html Using the RCA outputs is easy. Simply connect RCA cables from the back of the in-dash receiver directly to the amplifier. The RCA outputs are operating when the receiver is on. You can find a full playlist of How To videos from Pioneer about NEX receivers here: czcams.com/video/PeH_h8UHzBw/video.html You can learn more about Pioneer amplifiers here: czcams.com/video/99Hfmc8QxVc/video.html and you can learn more about Pioneer Car Audio speakers here: czcams.com/video/bwrJ4LcyHmU/video.html and you can find more videos on Pioneer's CZcams channel here: czcams.com/users/pioneerelectronics
Please help me!!! I have a AVH-4400NEX. When I receive a call my entire music and wave voice goes off. I tried Network and Standard modes. I also verified the mute level was on ATT or Off and it still shuts off all sound but phone conversation. Please let me know what I’m doing wrong.
This is normal operation for AVH-W4400NEX. When on a Bluetooth connected phone call, all audio except the remote caller is muted from the in-dash receiver. The ATT/Mute/Off setting is for connected smart phone applications or external navigation during the output of navi voice guidance. You can find more videos on Pioneer's You Tube Channel here: czcams.com/users/pioneerelectronics
I changed my car battery and by mistake when I booted up the radio hit network mode. Now I can not access the setting to change it to standard mode. I do have a parking brake toggle switch and it still won't let me access it. I pulled the battery, did a factory rest and nothing is working help please.
You need to do a Restore Settings. You can see it here: czcams.com/video/PeH_h8UHzBw/video.html You can find a full playlist of How To videos from Pioneer about NEX receivers here: czcams.com/video/ObpKXwrN8us/video.html and you can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
I'm having an issue with my new AVH3500NEX, everything works except the EQ and all Audio menu change settings. They are all greyed out, no matter what I do they will not respond. I can listen to radio, watch DVDs, use my Android phone and all the other sources. Just have those 2 issues, its so strange.
Be sure to have a music source ( like AM/FM Radio) selected and playing when you use the audio settings. If the audio settings are still grayed out, I recommend to press the microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset behind the detachable face on the Pioneer AVH-3500NEX. You can see it here: czcams.com/video/ibWu0o2hW24/video.html Next I recommend to do a System Restore. You can see it here: czcams.com/video/OMJ5yJ6157g/video.html You can find a full playlist of How To videos with very similar operation to Pioneer AVH-3500NEX here: czcams.com/video/kpKYks-17gM/video.html Please be sure to install the latest firmware for your Pioneer AVH-3500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-3500NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: czcams.com/users/pioneerelectronics
You can activate Advanced Sound Retriever with all digital formats and when streaming Bluetooth audio from a phone or other device. Try advanced sound retriever with it's different settings. If you don't like the way Advanced Sound Retriever sounds with lossless files, switch it Off. You can find more videos about AVH-2300NEX in this playlist: czcams.com/video/kpKYks-17gM/video.html
The Bluetooth Audio source on your Pioneer NEX in-dash receiver should play at or near the same volume level of other music sources such as AM/FM radio. To begin, turn the volume level on the in-dash receiver down to a low listening level. If you are using a phone to play music through Bluetooth Audio, start your music app and being to play a song. I recommend to turn up the volume on your phone to about 90%. Switch the in-dash receiver to the Bluetooth Audio Source. Adjust the volume on the in-dash receiver to the desired listening level. You can see a video about listening to Bluetooth Audio on a Pioneer NEX in-dash receiver here: czcams.com/video/TUaLxpVLg5g/video.html You can find more How To videos about Pioneer NEX in-dash receivers in this Pioneer You Tube Playlist: czcams.com/video/kpKYks-17gM/video.html Please be sure to install the latest firmware for your Pioneer AVH-2500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-2500NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: czcams.com/users/pioneerelectronics
You have the receiver set up in Network Mode. You need to do a Restore Settings and choose Standard Mode. You can see it here: czcams.com/video/PeH_h8UHzBw/video.html You can find a full playlist of How To videos from Pioneer about NEX receivers here: czcams.com/video/ObpKXwrN8us/video.html and you can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
For some reason, my "Rear Speaker Output" remains grayed out, even when I turn the source off. The unit is in "Standard Mode". My car has a small rear subwoofer, that is not working. It seems like the "Rear Speaker Output" switched to subwoofer would be the fix, but the option stays grayed out. Anyone have an idea? It's a DMH-1500NEX
Are you certain the receiver is in Standard Mode? Rear Speaker Output being grayed out usually means the receiver is in Network Mode. You can see it in this video: czcams.com/video/3t9zCiIGO7M/video.html Please be more specific with your question. Are you using the in-dash receiver's speaker level outputs or the RCA outputs to send signal to the subwoofer? If you are using the speaker level outputs to run the 4 speakers in your vehicle, front and rear, I recommend to use the receiver's subwoofer RCA output to send signal to the subwoofer. You can see it here: czcams.com/video/I1XFyRiTZKc/video.html Is the subwoofer a factory sub, or is it an after market subwoofer? Are you certain the subwoofer is powering up with the vehicle switched on? If this is a factory subwoofer, it may not be switching on or the signal may not be reaching the subwoofer. Please take a look at this video for switching the rear speaker output from full range to Subwoofer output: czcams.com/video/Z86fQryoRVk/video.html If you are certain you have the receiver set up in Standard Mode, the receiver is off, and still can't access the Rear Speaker Output menu, I recommend to press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the DMH-1500NEX on the hard key panel to the far right. You can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
Please be more specific with the Pioneer model number. If your cousin has a Pioneer video receiver he may need to engage the vehicle's Parking Brake in an ON-OFF-On operation in order access that setting. If your cousin engages the vehicle's Parking Brake and still can't access the setting the vehicle may have an incorrect connection to the receiver's Green Parking Brake Wire. Your cousin can learn more about the Green Parking Brake Wire here: czcams.com/video/-bF3uzzaT30/video.html Here is a video of Pioneer AVH-2300NEX doing a System Restore: czcams.com/video/OMJ5yJ6157g/video.html You can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
All the options under Audio are greyed out and I have no sound. I installed standard mode, I have power coming to the amp via battery and the head unit.
Audio settings are greyed out until you choose a source like FM radio. If you choose a source and still have no audio options reset the in dash receiver by pressing the reset button on the hard keys. You'll need a paperclip or other small point for this. You can find more videos about Pioneer AVH-2300NEX here: czcams.com/video/idL6MOXfNVI/video.html
I am experiencing a big lag when i am watching CZcams using the Bluetooth connection. I have tried numerous smartphones with various Bluetooth versions (4.2,5.0) and the lag is always there. I am talking for a 2 to 3 sec lag . Video's become unwatchable.Any ideas cause i am very disappointed?
The in-dash receiver is operating as designed. It is not designed to watch movies on your phone while using the in-dash receiver as a Bluetooth speaker. When playing back video from USB flash drive, or with AV input, audio and video are synchronized. You can see a video showing music and videos from USB here: czcams.com/video/KWaYfYk90IU/video.html
I recommend to press the microprocessor system reset button located on the Hard Key Panel. You'll need a paper clip or some other small point to press this button. After reset, select a source, like Radio. No audio options are available unless a source is selected. You can find more videos about Pioneer AVH-2300NEX here: czcams.com/video/ObpKXwrN8us/video.html
I have no idea why. If you want to correct the issue, I recommend to press the receiver's microprocessor reset button. If you have a Pioneer receiver with a microprocessor reset button, you'll need a paperclip or some other small point to press the button. I don't know what Pioneer in-dash receiver you have so, I can't tell you where to find the microprocessor reset button. You can see the microprocessor reset on a Pioneer receiver here: czcams.com/video/o6iawP279R4/video.html You can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
Thank you for these videos!!! I recently had a 1500NEX installed. The installer was a whiz at the settings, but I forgot 90% of what he showed me. I will refer to these videos often.
The 1500NEX is incredible, by the way. Thanks, Pioneer, for making a fantastic product!
You can find a full playlist of How To videos with very similar operation to Pioneer AVH-1500NEX here: czcams.com/video/hUAJPnvCMgc/video.html Please be sure to update your Pioneer AVH-1500NEX to the latest firmware. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-1500NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: czcams.com/users/pioneerelectronics
In the speaker level settings you have the option for the listening position to be off or be on all and I was hoping you’d cover that
Please take a look at this part of the above video: czcams.com/video/Z86fQryoRVk/video.html There is an explanation of Listening Position as it relates to Time Alignment with the receiver. You can see the Listening Position settings as factory Presets for Time Alignment. When you go to the Time Alignment screen, you can customize the Time Alignment in the system to suit your needs. You can find a full playlist of How To videos about Pioneer AVH-2300NEX here: czcams.com/video/ObpKXwrN8us/video.html and you can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
Thanks for this video I could not figure out why it was muting when I got a call thank you 🙏
You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: czcams.com/video/ObpKXwrN8us/video.html
You can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
Good videos keep up the good work thanks they were a big help.
You can find more How To videos about Pioneer AVH-NEX in-dash receivers in this Pioneer video playlist: czcams.com/video/ObpKXwrN8us/video.html and you can find more videos on Pioneer's You Tube Channel here: czcams.com/users/pioneerelectronics
A couple things i just want to make sure of. The crossover setting and the subwoofer setting. Entering both yield the same menu. Is their any difference in the two menus ? They access the same 3 crossover points and settings stay in both. I figured it’s just something to do with network mode Other question- on the high pass crossovers , do they only work if your highs are run on rcas or does it control the speakers if run off the deck?
On Pioneer NEX in-dash receivers, the subwoofer setting is simply a short cut to the main crossover setting screen. The crossover settings apply to the speaker level outputs as well as the RCA outputs. For example: the HPF on the Front will apply a crossover and slope to the Front Speaker outputs and the same crossover and slope will be applied to the Front RCA outputs. You can learn more about setting up Standard Mode or Network mode on Pioneer NEX receivers here: czcams.com/video/PeH_h8UHzBw/video.html You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: czcams.com/video/ObpKXwrN8us/video.html and you can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
Thank you for this! My DVD volume was lacking and changing sources back to FM hurt my ears!
You can find more videos about AVH-2300NEX here: czcams.com/video/uJ_5dgBsogU/video.html
So my previous one of these (maybe 4 years ago, same basic system) did not have a max volume level, but this one does (AVH-521EX). Is there a way to turn that off, or has some engineer decided what is "too loud" for our ears?
Do you have a question about the operation of your Pioneer AVH-521EX? You can find a full playlist of How To videos from Pioneer about EX receivers here: czcams.com/video/TzCGdtiSXec/video.html and you can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
I just installed W4400NEX in to my WRX 2017 limited with Harman Kardon using iDataLink Maestro RR. 2 issues I'm having: Please someone help.
1: I couldn't retain the factory USB on the arm rest. It shows, "HUB ERROR" on the screen when I plug in the Apple lightning cable. No biggy here since I use wireless Apple Carplay anyways.
2- This is my main problem- I can't barely hear the front speakers. Even if I use the fader to send all the signal to the front speakers, there's not too much sounds coming out front the front speakers. I double checked my connections and I did plug them correctly.
Note: Since I am retaining the Harman Kardon amp, I don't need to hook up the speaker wires from the Pioneer main harness to the RR harness right?
I just hooked up the front and rear RCA cables from the RR to RCA behind the Pioneer radio.
As of 2019, Pioneer in-dash receivers do not support a USB hub or multiple connections to one USB port on the in-dash receiver.
Are you able to hear full range audio from the rear speakers in the vehicle? What happens when you fade to the front? Do the rear speakers lower in volume? Can you hear the remote caller on a phone call? I recommend to contact Maestro tech support for more information on connections to the integration system.
Deckerd Otto I figured it out if why there’s no sound coming out from the front speakers it’s bc when I removed the factory HU, the telematic unit was underneath the factory HU. The front speakers are connected to that unit. So I put it back, shoved it and hid it behind the dash, now everything works but it’s throwing bunch of error in the dash. I figured it out that one also, all the lights in the dash disappears when unplugging the OBD2 cable which is I don’t really mind not having all the gauges and whatnot. But now the problem is, back up camera no longer works. I ordered the 12-6V camera step down, hopefully that will solve the issue I’m having.
When I try to use the rca pre outs front or rear in standard mode at the same time as using the speaker out puts, there is no signal coming from the preouts.
If I put it on network mode, it changes the speaker outputs to network mode also. Only highs going out the speaker outputs. This does not work for me as I need to use the speaker outputs for the car factory bose system. 2009 Mazda CX-7.
Am I doing something wrong?
Ideally
1; I would like to use network mode as I have after market tweeters that I have installed running on their own separate amp.
Or 2; use standard mode keeping the speaker outputs in use for the bose system and using either the front or rear pre outs running to the separate amp for the tweeters. But no signal is coming out of them in standard mode. If I turn the unit up all the way and the gain up all the way on the amp, you can hear a faint signal. Surly I'm missing something.
Rca connections have been checked and rechecked and the amp is a brand new pioneer 3702.
Note: Subwoofer Pre Outs work fine
Cheers if you can help me with this one.
What is the model number of your Pioneer in-dash receiver?
Please clarify your question: Are you saying, in Standard Mode, you are getting signal from the RCA outputs, until you connect a speaker to the corresponding speaker level output? And only at that time does the RCA output stop functioning? And if you disconnect the speaker, the RCA then begins to function normally again?
It's normal operation of the receiver for the outputs, both RCA and speaker level to change with Standard Mode or Network mode.
In Standard Mode the Front RCA outputs mirror the White and Gray speaker level outputs. And in Standard Mode the Rear RCA outputs mirror the Green and Purple speaker level outputs. This is normal operation.
If you are not seeing simultaneous RCA output and Speaker level output from the receiver something is wrong.
If possible, I recommend to press the receiver's microprocessor reset button. This may correct the situation.
Hello, i have interesting problem. my SMART SYNC APP , doesnt save settings, when i press Save Settings, it shows that it saved press OK. when i turn off my car, and turn on, the SMART SYNC APP is back to default, and the "Load" is greyed out. ? :(
What is the model number of your Pioneer in-dash receiver?
Ok so I got the same radio and I was wondering how you would turn on the rca cables
I ave one for a sub already hooked up but I want to run one for the front
What is the model number of your Pioneer in-dash receiver? Pioneer NEX in-dash receivers have 3 sets of RCA outputs for operating external amplifiers. You can see it here: czcams.com/video/s-RuRzsRfE8/video.html Using the RCA outputs is easy. Simply connect RCA cables from the back of the in-dash receiver directly to the amplifier. The RCA outputs are operating when the receiver is on. You can find a full playlist of How To videos from Pioneer about NEX receivers here: czcams.com/video/PeH_h8UHzBw/video.html You can learn more about Pioneer amplifiers here: czcams.com/video/99Hfmc8QxVc/video.html and you can learn more about Pioneer Car Audio speakers here: czcams.com/video/bwrJ4LcyHmU/video.html and you can find more videos on Pioneer's CZcams channel here: czcams.com/users/pioneerelectronics
Please help me!!! I have a AVH-4400NEX. When I receive a call my entire music and wave voice goes off. I tried Network and Standard modes. I also verified the mute level was on ATT or Off and it still shuts off all sound but phone conversation. Please let me know what I’m doing wrong.
This is normal operation for AVH-W4400NEX. When on a Bluetooth connected phone call, all audio except the remote caller is muted from the in-dash receiver. The ATT/Mute/Off setting is for connected smart phone applications or external navigation during the output of navi voice guidance. You can find more videos on Pioneer's You Tube Channel here: czcams.com/users/pioneerelectronics
I changed my car battery and by mistake when I booted up the radio hit network mode. Now I can not access the setting to change it to standard mode. I do have a parking brake toggle switch and it still won't let me access it. I pulled the battery, did a factory rest and nothing is working help please.
You need to do a Restore Settings. You can see it here: czcams.com/video/PeH_h8UHzBw/video.html You can find a full playlist of How To videos from Pioneer about NEX receivers here: czcams.com/video/ObpKXwrN8us/video.html and you can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
I'm having an issue with my new AVH3500NEX, everything works except the EQ and all Audio menu change settings. They are all greyed out, no matter what I do they will not respond. I can listen to radio, watch DVDs, use my Android phone and all the other sources. Just have those 2 issues, its so strange.
Be sure to have a music source ( like AM/FM Radio) selected and playing when you use the audio settings. If the audio settings are still grayed out, I recommend to press the microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset behind the detachable face on the Pioneer AVH-3500NEX. You can see it here: czcams.com/video/ibWu0o2hW24/video.html Next I recommend to do a System Restore. You can see it here: czcams.com/video/OMJ5yJ6157g/video.html You can find a full playlist of How To videos with very similar operation to Pioneer AVH-3500NEX here: czcams.com/video/kpKYks-17gM/video.html Please be sure to install the latest firmware for your Pioneer AVH-3500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-3500NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: czcams.com/users/pioneerelectronics
Does sound retriever affect lossless files?
You can activate Advanced Sound Retriever with all digital formats and when streaming Bluetooth audio from a phone or other device. Try advanced sound retriever with it's different settings. If you don't like the way Advanced Sound Retriever sounds with lossless files, switch it Off. You can find more videos about AVH-2300NEX in this playlist: czcams.com/video/kpKYks-17gM/video.html
Thanks!
I cant adjust volume on bluetooth, it sounds really low.
The Bluetooth Audio source on your Pioneer NEX in-dash receiver should play at or near the same volume level of other music sources such as AM/FM radio. To begin, turn the volume level on the in-dash receiver down to a low listening level. If you are using a phone to play music through Bluetooth Audio, start your music app and being to play a song. I recommend to turn up the volume on your phone to about 90%. Switch the in-dash receiver to the Bluetooth Audio Source. Adjust the volume on the in-dash receiver to the desired listening level. You can see a video about listening to Bluetooth Audio on a Pioneer NEX in-dash receiver here: czcams.com/video/TUaLxpVLg5g/video.html You can find more How To videos about Pioneer NEX in-dash receivers in this Pioneer You Tube Playlist: czcams.com/video/kpKYks-17gM/video.html Please be sure to install the latest firmware for your Pioneer AVH-2500NEX. You can find it here: www.pioneerelectronics.com/PUSA/Car/NEX/AVH-2500NEX#downloads and you can find more videos on Pioneer's You Tube Channel here: czcams.com/users/pioneerelectronics
I have no audio in front speakers and no fader in settings. Help!!
You have the receiver set up in Network Mode. You need to do a Restore Settings and choose Standard Mode. You can see it here: czcams.com/video/PeH_h8UHzBw/video.html You can find a full playlist of How To videos from Pioneer about NEX receivers here: czcams.com/video/ObpKXwrN8us/video.html and you can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
For some reason, my "Rear Speaker Output" remains grayed out, even when I turn the source off. The unit is in "Standard Mode". My car has a small rear subwoofer, that is not working. It seems like the "Rear Speaker Output" switched to subwoofer would be the fix, but the option stays grayed out. Anyone have an idea? It's a DMH-1500NEX
Are you certain the receiver is in Standard Mode? Rear Speaker Output being grayed out usually means the receiver is in Network Mode. You can see it in this video: czcams.com/video/3t9zCiIGO7M/video.html
Please be more specific with your question.
Are you using the in-dash receiver's speaker level outputs or the RCA outputs to send signal to the subwoofer?
If you are using the speaker level outputs to run the 4 speakers in your vehicle, front and rear, I recommend to use the receiver's subwoofer RCA output to send signal to the subwoofer. You can see it here: czcams.com/video/I1XFyRiTZKc/video.html
Is the subwoofer a factory sub, or is it an after market subwoofer?
Are you certain the subwoofer is powering up with the vehicle switched on?
If this is a factory subwoofer, it may not be switching on or the signal may not be reaching the subwoofer.
Please take a look at this video for switching the rear speaker output from full range to Subwoofer output: czcams.com/video/Z86fQryoRVk/video.html
If you are certain you have the receiver set up in Standard Mode, the receiver is off, and still can't access the Rear Speaker Output menu, I recommend to press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the DMH-1500NEX on the hard key panel to the far right.
You can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
My cousin cant do factory reset by the screen on his 2250. Does anyone know another way?
Please be more specific with the Pioneer model number. If your cousin has a Pioneer video receiver he may need to engage the vehicle's Parking Brake in an ON-OFF-On operation in order access that setting. If your cousin engages the vehicle's Parking Brake and still can't access the setting the vehicle may have an incorrect connection to the receiver's Green Parking Brake Wire. Your cousin can learn more about the Green Parking Brake Wire here: czcams.com/video/-bF3uzzaT30/video.html Here is a video of Pioneer AVH-2300NEX doing a System Restore: czcams.com/video/OMJ5yJ6157g/video.html You can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics
All the options under Audio are greyed out and I have no sound. I installed standard mode, I have power coming to the amp via battery and the head unit.
Audio settings are greyed out until you choose a source like FM radio. czcams.com/video/SMHohqS7DSk/video.html What mode in dash receiver do you have?
Audio settings are greyed out until you choose a source like FM radio. If you choose a source and still have no audio options reset the in dash receiver by pressing the reset button on the hard keys. You'll need a paperclip or other small point for this. You can find more videos about Pioneer AVH-2300NEX here: czcams.com/video/idL6MOXfNVI/video.html
I am experiencing a big lag when i am watching CZcams using the Bluetooth connection. I have tried numerous smartphones with various Bluetooth versions (4.2,5.0) and the lag is always there. I am talking for a 2 to 3 sec lag . Video's become unwatchable.Any ideas cause i am very disappointed?
The in-dash receiver is operating as designed. It is not designed to watch movies on your phone while using the in-dash receiver as a Bluetooth speaker. When playing back video from USB flash drive, or with AV input, audio and video are synchronized. You can see a video showing music and videos from USB here: czcams.com/video/KWaYfYk90IU/video.html
Setup Android Auto of Apple Carplay, when you do this you are getting audio via USB so it's synced
Justin C. Music still delay with apple carplay. Seems bluetooth is a bit faster. Avh-nex4500
Everything is grayed out
I recommend to press the microprocessor system reset button located on the Hard Key Panel. You'll need a paper clip or some other small point to press this button. After reset, select a source, like Radio. No audio options are available unless a source is selected. You can find more videos about Pioneer AVH-2300NEX here: czcams.com/video/ObpKXwrN8us/video.html
@@deckerdotto6035 hey i have a question..speaker level-»subwoofer level..how does it affect sound/performance wise? ,does it affect rca voltage?
None of mybuttons work on my pioneer radio...any idea why?
I have no idea why. If you want to correct the issue, I recommend to press the receiver's microprocessor reset button. If you have a Pioneer receiver with a microprocessor reset button, you'll need a paperclip or some other small point to press the button. I don't know what Pioneer in-dash receiver you have so, I can't tell you where to find the microprocessor reset button. You can see the microprocessor reset on a Pioneer receiver here: czcams.com/video/o6iawP279R4/video.html You can find more videos on Pioneer's CZcams Channel here: czcams.com/users/pioneerelectronics