#MiniConstruction #ScienceProject #construction #dam #Mini #Hydroelectric Great, thank you all for watching my video. Please click subscribe to the channel . Thanks
Absolutely! That is incredibly well done and very inspiring! Thank you for sharing truly worthwhile content with the world. It is very much appreciated* 🕊 444*
❤❤❤❤❤❤❤❤ I truly love "THE GIFT"!!!🎉🎉🎉🎉 Father God is sooooo FREAKING AWESOME!!! The Gift 🎁 of WISDOM & KNOWLEDGE is POWERFUL TOGETHER!!! It was sooooo FREAKING AWESOME seeing you/him creating this!!!💯💯💯
You need to put the turbines as low as possible otherwise you basically waste all the potential energy stored in the water. If you place the turbines on top of your dam, it does not make any sense to build the dam in a first place. In your case the power output is the same as turbine in the river, which is basically none. Also the water from the overflow cannot just fall down to the base of the dam, it will destroy the dam in a few weeks.
While many of us here knows better and can do better theoretically, this guy just practically showed a functional example even when it's not perfect. Maybe he scarcely graduated from an urban school and many here studied in Cambridge. Let's appreciate his work. 👌
I think he could do much better than us (well many anyway, I know I haven't studied the subject but there's probably lots of engineers here) if he was building one of these as a serious power generation setup. I think these are like those RC drones made to look like spaceships or historical planes, interesting to build but practicality is secondary. Look at those LEDs placed like they're lining a road, I think he put a miniature control station there too, I think those are the main goal.
@@EvonixTheGreatest I think you are right but the videos maintain a pretense like this isn't just smoke and mirrors. It parallels those "primitive technology" channels who use heavy equipment off camera in that the presentation is (whether intentional or not in this case) disingenuous.
If you have to redo it, place the turbines in the bottom of the wall and have the valve behind the turbines. You can try to build a smooth nuzzle to increase the speed of the water so that the genarator can turn faster. You should also use fins and a curved wall (curvature into the Water side of the dam) to support the structure. You also could use gears to increase the speed and with that the voltage of the generator
was gonna comment this but seen you already did, it would prob produce 50% more if they were just before the bend at the bottom, thats how they used to make high pressure water for the mines etc, pipe starts up top 4m wide and by the time its at the bottom its a 5 inch pipe with pressure that would peel your skin off
I think the key here is that he likes building things and could care less about the power output. He never shows batteries, inverter or power output. He did a good job and gets lots of views. It is fun for him.
Когда он сделал плотину в один ряд кирпичной кладки у меня закрались сомнения. Но когда он начал штукатурить землю, стало ясно - это конструкция на века!
Инженеры с тобой солидарны) ну очень надёжно всё выглядит. И колонны из кирпича на земле стоящие.. Счастливые люди - не знают что такое морозное пучение... Эх..
Looks like a really fun project. My general improvements would be to make the brick wall curve into the water for extra strength and lower the turbines
beautiful, wonderful... if you put the propellers in the bottom of the well, and control the flow of the vertical tube at its base, you can have much more energy.
While it may not be the most effective or efficient damn, it’s still a good looking and working damn! Thank you for sharing, it’s cool seeing people figure out how to design and make things like this
I love that man's creative genius that he has put to practical use,no matter of how he could have done it better,, the fact is this man rather than waisting his time put his God given brain 🧠 to work and put together a device that actually makes electricity,, and I agree with that person that mentioned that it would be a great place for school kids to come and visit to see what a person can do when they apply themselves and not wait for some sort of entitlement,,, good job there buddy,,God bless you and thank you for that video 😊
The real accomplishment here is 8M views. The design was perfect for that. I’m sure he could have built a dam that generated way more power. I’m also sure that that wasn’t his goal at all. Perfect design for the goal intended.
You could see water penetrating the concrete at the top area near the turbines anyway. I'm guessing the dam didn't function for more than a day and stayed standing for less than a week. Channels like this make their project and then abandon it and go on to the next, they don't maintain any of the projects they build.
This seems like a village paddy field somewhere in Asia. Villagers don't have separate water supply and walls between their fields. They depend on rain, and water freely moving from one plot to another. What I'm trying to say is, he probably had to break the dam himself after making the video, so no need to worry about it's durability. But yes, there are design flaws.
Despite whatever "flaws" in the Physics, demonstrates clearly: Where there is a WILL, there IS a WAY. Human INDUSTRY and attention to detail at its finest, and a righteous sense of HUMOR. 👍👍👍 I can hear the voices murmuring in the ethers: I wish I'd thought of that!
Kaplan turbines work on flow. Bernoulli's principal says flow in a pipe remains constant. So that would not matter much. Francis tubines require more pressure but much less flow. They would benefit from being placed lower in the penstock, but that is not what he built here.
Молодец! Просто и красиво! Турбинки нужно опустить ниже (там давление выше) В конце окончательно понял для кого был сделан мост. Самая любознательная собака! Все посмотрел, все понял и наверное надо надо собаке поступать в гидротехнический институт.
Very interesting to watch thanks CG. It just goes to show how much free power is produced from running water. Also enjoyed hearing the sounds of the speeded up footage and it's nice that the builders dog was part of the show.
LOL this is not efficien solution at all :D you need transfer waret in pipe from the hill down to you micro hydro turbine, to make effecient power source. This is to make money on youtube, not to make energy. This is art, not engineering.
What an excellent craftsman this guy is ! It would be very easy to increase the power output just by mounting the impellers on a longer shaft (with additional bearing to keep it central) so they are at the bottom of the overflow pipes , but that and the comments about the longevity of the design aside, it really is excellent craftsmanship !!
You know this was never intended to make power right? It’s purely to get views. They would have walked away from it the next day and never even cleaned up the mess. I can’t imagine that flooding the area behind the dam by 5 feet would do much good to the area too.
I pride myself on being mechanically and technically competent in a range of fields, I could wire up the electrical side of this project with no problems. But here I learn that it's also very handy to have the skills to build the kind of structures which allow you to put those mechanical/technical systems to good use. Now I want to learn how to lay brick and cement render like this guy! Cool project!
Do yourself a favour and watch some actually qualified people do this, especially some structural engineering because I can’t see this thing lasting for more than a couple of weeks
I’ve never built anything like this, but I could see many very weak places, or just plain flaws in this structure. The biggest thing I can see missing is that there is no structural reinforcement of any kind. No wire, grid, bars, beams, … nothing. With that said, I acknowledge the craftsmanship of this thing. It’s just that it’s more of a miniature model than a facility meant to last.
@@xxmlgxx2151 I didn’t think there was any point in mentioning it honestly, but while we’re at it, the turbines will definitely rust, too heavy to be efficient and are practically at the water level so don’t get any of the speed the water gets while falling. Also absolutely zero safety when welding, if he holds it with his bare hands and accidentally electrocutes himself he’d be very dead.
I am amazed how he constructed a dam with a brick wall…. Even a small tank requires retaining walls 😅… even though there are lots of other engineering problems I like your craftsmanship 🥳🥳
Да вся конструкция простоит максимум два дня, пока грунт стенки канала не промокнет, вообще не понимаю, как кирпичная стена держит давление в тонну, если её с ноги можно поломать?
Well... it does look like it was maybe in China so..,..yea.. I mean, the Yangtze still floods and high rise building just randomly fall over there so... engineering isn't really their strength. Stealing others people's and countries designs and artistic property....now they are damn good at that! They excel in that realm!!!! Damn,... hope I CZcams and Biden don't take what I said the wrong way. I don't wanna get banned from CZcams and...wait..is that a black helicopter heading this way. Holy Crap! LeBron James is in the gunner position. Damn.... I've gone to far this time!
Dude, I'm amazed at how much " "basic" " eduction, common sense and experience was put in this video. The part when he uses a large pipe to bend the blades of the turbine so they have a more or less weldable curve blew up my mind. As you say there are a lot things that are wrong but I think this video is not just good because his craftmanship... If it serves to spark somthing in the mind of a kid or a teenager, if it serves to push them even if just a little to experiment and learn... I think that make this content also valuable. 😉
Congratulations to this guy. Having managed construction of a small micro-hydro electrical project (14-17 kva) with 2 separate locations and 1 mile of pipe between them. Access was difficult at my site and time consuming and involved 9 miles of barge/lake travel. Without knowing this man’s surrounding terrain I would find it difficult to be critical. Yes the turbine should be low, the dam should have wings and so on. Or you could lay a pipe siphon with valves across the top of the earth to his small generator. You already have the existing dam.
It’s always great to see design imagination at work. It shows there are many different solutions to the same problem: how to generate power from water flow. I take the comment about having turbines lower down but that would demand a different turbine design (perhaps a Pelton Wheel Turbine). However it’s associated generator would have to be kept dry and that would be difficult, placed at the base of the down tubes. The good thing about the design shown is that the generators are well above the water. Also, if the turbines fit the down tubes well enough and the water flow through them remains coherent (laminar flow) then the weight of water BELOW the turbine will also energise it. In other words, the turbine will be ‘sucked’ from below and ‘blown’ from above. For me the question is ‘What diameter of pipe will produce laminar flow both above and below the turbine?’ This vid is a great contribution towards Appropriate Technology also known as Alternative Technology. Brilliant video. 🙏🙏🙏
@@Tran-Chien I will carry on thinking about this design. I suspect that long screw shaped turbines with a very coarse pitch would preserve the laminar flow of water as it passes down the down pipes. What I am picturing is a turbine similar to a worm gear but, as I say, with a very coarse thread of perhaps just two turns of the thread from top to bottom. It might be good if the spiral was cut with the profile similar to an ‘acme thread’ profile. An acme thread is like a ‘square thread’ but with a more angled ‘shoulder’ to the thread. Why? This profile would force a small percentage of the water flow into the small gap (clearance) between the turbine screw an the wall of the pipes. This would prevent direct contact between the turbine and the inside of the down pipe it was sitting in. This would a) massively reduce friction, b) minimise wear, maximising the life of the turbine c) ‘centre’ the turbine within the down pipe, stabilising it. This would eliminate vibrations. The ‘elongated worm gear turbine’ would enable that idea I mentioned that with optimal design, the turbines would be ‘sucked’ from below as well as ‘blown’ from above. Another appealing aspect of your design is that it is made from available components. As for the ‘elongated worm gear turbine’ this could be made in hardwood and turned in a screw-cutting lathe. Alternatively it could be sourced as a spare part Archimedes Screw as found in domestic kitchen meat grinders. Ideally the thread should have a longer pitch than the typical meat grinder screw, but I think a meat grinder screw would help with preserving laminar flow. Finally, the longer the pitch of the screw turbine, a) the slower its rotation and b) the higher its torque. High torque and low RPM would enable any direct coupled generator to work at a corresponding low RPM, reducing bearing wear. If the generator is designed to work optimally at high RPM there could be a gearbox between the turbine and the generator. The scope for development in your system is very high. As I see it, this is an alternative technology suited ideally to small scale power generation with perhaps one system supplying power to a maximum of about three households. The design could be replicated many thousands of times within the skill range and parts available almost anywhere in the world where water flow with a ‘low head’ of about 1-2 metres can be arranged. I admire your work which I think could have a very widespread beneficial impact. I hope you can find collaborators who know how to calculate the relationship between fluid dynamics, turbine design, generator RPM and predicted generator output. Alternatively you can optimise your system by trial and error. It only has to be good enough. It has been said ‘Don’t let Perfection be the Enemy of the Good!’
when you said something about a vacuum effect, I assume a tapered end would work if the math is done just right. Too much water, it doesnt work, too little water, it doesnt work. You know how that goes :p
@@EvilNeonETC That sounds like a good idea. Thinking about it a taper might make the water accelerate although, as the mass of water would reduce towards the bottom end, the effect of gravity (the ‘suck’) might be less too. In power station design, the high pressure end of the turbine (first stage) is smaller than the low pressure end of the turbine. These turbines increase in diameter in three steps, I think to extract as much kinetic energy from the steam as possible. However water behaves very differently to steam, being uncompressable. As laminar flow in water is our objective here, I think having a reducing taper could be a good idea 👍
@@EvilNeonETC Also, further to my last comment the amount of energy in the water is less at the top and potentially more at the bottom so tapering that is the reverse of a steam turbine makes good sense. I’m thinking that the rate of transfer of energy from water flow to turbine should be the same along its length… so yes 👍 Steam Turbine blades are also angled differently at each stage so maybe the pitch of the turbine blade should also vary along its length 🤔
The spillways may be insufficient to prevent degradation of surrounding dirt wall under torrential rains. I recommend concreting the walls as well using wire mesh backing.
I was surprised this one held the weight of the water being so tall with no support on the down stream side . Which he has put more engineering into others I've watched. But I guess he has the minimum engineering down to a science by now , knowing what will last long enough , then be easier to demolish and remove . The engineering and investment would be out the box crazy to make it last even 1 year through the rainy season I bet. And I think all you could hope to generate electricity wise probably wouldn't even equal a small 1000 watt gas powered generator that you would get 5 years of on demand electricity out of for $2-300 dollars . And then he probably doesn't even have the water rights to divert that much water a year ?
This dam looks really cool and took a lot of effort to build for sure. Although I am having some second thoughts on the design decisions. The wall of the dam is not built into any recess in the wall ant it is also not curved at all like all full size dam walls are. This usually helps to withstand high water pressures. Now, the video shows that the dam apparently is strong enough as is, but still - it could be much stronger. The wall is also additionally weakened by the channels alongside the channel walls that support the dam. Now, I am not an expert, but maybe this dam won't withstand the force of the river carrying high waters as is has been designed right now.
@@randybobandy9828 Yeah you're right, but it's also much thinner and not built out of concrete, like a full size dam would be. It is a scaled model, which is true for the amount of water it is holding back but also for the structure itself.
I’ve got a limited amount a highly limited amount of construction experience and no I agree the wall won’t last there’s no concrete stopping erosion on the sides of those u shapes to redirect water the wall isn’t thick enough to hold that kind of weight back for a high amount of time the designs cool he just didn’t put enough meat to the damn and redirects
As you are getting better at this all (well, you were always GREAT!) you may want to start adding a voltage meter to show how much power your future damns can make.
@@garrysekelli6776 none because this design doesn't produce any usable energy, turbines need to at the lowest point of the dam to use the potential energy of the height delta
Post the real time version of this as well as this accelerated one. I, for one, could watch that as long as it takes start to finish. Fascinating, educational AND entertaining.
The previous remarks do go to the betterment of the design. My experience with water at this scale points to erosion eventually destroying such beautiful work. As a model, these designs create enormous possibilities for new projects. Always remember that the water at the base weighs more than at the surface thus the pressure will eventually seep under the barrage's footings. Another application might adopt a water wheel on axle to drive the turbine on a dry land position. Regardless, we see brains at work here with different designs. Strength is the priority if the project is to survive. A small ditch of this sort is not to be misjudged.
This was so cool. And something DIY that anyone could do who lives in area where power is unavailable or to expensive. Anything is possible. Again this was awesome 👍👍👍
Не нашёл коменты на русском и решил написать сам ). Поздравляю! Вы постепенно увеличиваете высоту плотин)) и делаете уже почти высоконапорные гидротурбины )))
Brilliant, and the amount of efficiencies you'll gain in a rebuild (once you spot them) are huge. Use the water weight more and you'll be shocked at what you'll gain.
Thanks for making the dam video. Really appreciate your dam construction technique. Dam content is so much more interesting than so much else on CZcams.
Great idea in general. Obviously there could be improvements to efficiency and durability but the video did a great job of just showing what is possible. Thank you for sharing and putting so much work into the project.
I bet seeing all these dams at night with the lights in full shine is very fulfilling for you. It like a long day doing yard and just being able to enjoy it at the end. peace and quiet. Nothing beats nature
you have to give it to him he can work for a dam building company he can really save lots of lives and another thing i wanna give you a idea to a dam could you possibly make one that uses wind to let water out it would be really cool instead of polluting the world great job mate!
Thanks for watching the video! Please subscribe to the channel to support me and watch other interesting videos!
Absolutely! That is incredibly well done and very inspiring! Thank you for sharing truly worthwhile content with the world. It is very much appreciated* 🕊
444*
Amazing workmanship and creativity...thank you
❤❤❤❤❤❤❤❤ I truly love "THE GIFT"!!!🎉🎉🎉🎉
Father God is sooooo FREAKING AWESOME!!! The Gift 🎁 of WISDOM & KNOWLEDGE is POWERFUL TOGETHER!!!
It was sooooo FREAKING AWESOME seeing you/him creating this!!!💯💯💯
@@Helentheboss2024❤
Can you upload a video of the cleanup afterwards please?
You need to put the turbines as low as possible otherwise you basically waste all the potential energy stored in the water. If you place the turbines on top of your dam, it does not make any sense to build the dam in a first place. In your case the power output is the same as turbine in the river, which is basically none. Also the water from the overflow cannot just fall down to the base of the dam, it will destroy the dam in a few weeks.
thank you very much ❤️❤️❤️
Yes indeed
Wasted a lot of potential energy...
What a constructive comment
That's what I was thinking, (prolly cause I watch Grady at Practical Engineering, cause he's covered dams and hydro-electric.)
While many of us here knows better and can do better theoretically, this guy just practically showed a functional example even when it's not perfect. Maybe he scarcely graduated from an urban school and many here studied in Cambridge. Let's appreciate his work. 👌
Yes, thank you so much 💖💖💖💖💖
Parabéns pelo seu comentário 👏🏾... 👍🏾
I feel like his work is best appreciated as a cautionary tale of what not to do.
I think he could do much better than us (well many anyway, I know I haven't studied the subject but there's probably lots of engineers here) if he was building one of these as a serious power generation setup. I think these are like those RC drones made to look like spaceships or historical planes, interesting to build but practicality is secondary. Look at those LEDs placed like they're lining a road, I think he put a miniature control station there too, I think those are the main goal.
@@EvonixTheGreatest I think you are right but the videos maintain a pretense like this isn't just smoke and mirrors. It parallels those "primitive technology" channels who use heavy equipment off camera in that the presentation is (whether intentional or not in this case) disingenuous.
Lots of people don't understand that sometimes we make things just for the pleasure of doing it. really impressive. chapeau
yes thanks you very much ❤️❤️❤️❤️
Which is not the case.
@Zero Day • Appalachian Minutemen don't worry, nature always wins in the end.
@@geekogadgetz5948 Actually it's entropy which will always win. Nature will loose to it at some point in time too 🥲
@Zero Day • Appalachian Minutemen unless that thing actually produce electricity
Whenever I see this stuff I always think....How awesome it is to have your own land.
Yes, thank you so much ❤️❤️❤️❤️
And imagination. And Skill. And patience.
I will buy som land soon, it's not to pricy.
If you have to redo it, place the turbines in the bottom of the wall and have the valve behind the turbines. You can try to build a smooth nuzzle to increase the speed of the water so that the genarator can turn faster. You should also use fins and a curved wall (curvature into the Water side of the dam) to support the structure.
You also could use gears to increase the speed and with that the voltage of the generator
Yes, thanks you very much 👍
he can also increase the numbers of turbines to increase the power generation
my thoughts exactly!! like the idea, and admire its creativity.
The other systems I’ve seen like this have the impeller at the bottom of the intake. Perhaps this one isn’t as fancy.
yep, so much potential power wasted, its like 1 and half meter of height lost, just dropping from the turbines
Impressive. Try placing your turbines at a lower part of the funnels, it will harvest more power due to high kinetic energy there.
This is how I know you are in the engineering field of some sort or you just payed attention in school
was gonna comment this but seen you already did, it would prob produce 50% more if they were just before the bend at the bottom, thats how they used to make high pressure water for the mines etc, pipe starts up top 4m wide and by the time its at the bottom its a 5 inch pipe with pressure that would peel your skin off
So the longer the pipe, and the bigger the ratio between where the water enters/exits= more pressure/power?
@@steferos5601 faster the water is moving and the more time its had to settle so the air bubbles are somewhat gone the faster is will spin the prop,
@@steferos5601 czcams.com/video/uwoZceF0oUw/video.html
this is called hydraulic mining and it explains to you where the pressure comes from
I think the key here is that he likes building things and could care less about the power output. He never shows batteries, inverter or power output. He did a good job and gets lots of views. It is fun for him.
Yes! Thank you so much ❤️❤️❤️❤️
You need to post night shots of these dams, they must be beautiful! Great job!
Yes, Thank you for watching the video! Please subscribe to my channel and help me share ❤❤❤😍😍😍😍
How fun is this!?! I love these projects! This is how I would want to spend my retirement years. These are a joy to watch.
Thank you so much
I agree with you
I'm not going to wait for retirement, as soon as i have a piece of land or at least an indoor workshop area, i'm trying all kinds of stuff :)
This is awesome! The only improvement is to let the water drop further before hitting the turbine blades (more kinetic energy = more electricity)!
Yes, Thank you so much ☺️❤️❤️❤️
I thought the same, either that or multiple turbines down the tube
What did I do last weekend? I played video games. This guy build a freaking hydroelectric dam out of bricks.
Thank you for your support! Subscribe to my channel to watch more of my interesting videos ❤❤❤🥰🥰🥰
Когда он сделал плотину в один ряд кирпичной кладки у меня закрались сомнения. Но когда он начал штукатурить землю, стало ясно - это конструкция на века!
Yes, thanks you very much 👍
Инженеры с тобой солидарны) ну очень надёжно всё выглядит. И колонны из кирпича на земле стоящие.. Счастливые люди - не знают что такое морозное пучение... Эх..
@@Maksim_Kiselev_KM а ещё счастливые люди в душе ниибут зачем электростанциям стена, но строят) действительно счастливый человек)
@@Tran-Chien yeah, yeah.. START LEARN PHYSIC MAAAAN!
Кстати, заметь, они всё-таки доросли до лопаты!
Thank god he put in those mini barriers for all the mini people to be safe while on the dam!
Yes .Thank you so much ❤️❤️❤️
12:37 - Kept the dog safe.
Looks like a really fun project. My general improvements would be to make the brick wall curve into the water for extra strength and lower the turbines
Wouldn’t help the fact that the sides are going to erode away in a matter of weeks.
Yes!Thank you very much!
@@smelltheglove2038 I would say curved wall would give this dam authenticity. It is nice to look at. but fare from full potential.
@@smelltheglove2038 that's why he should make it not with bricks but as monolith concrete, either way filtration would ruin dam.
Can someone please buy this guy a pair of shoes?
Why you can't
Cement!
Definitely like the no music no commentary build. Cool to see a mini version of a dam being built.
beautiful, wonderful... if you put the propellers in the bottom of the well, and control the flow of the vertical tube at its base, you can have much more energy.
There is no structural support holding back the dam. Once the dirt gets saturated with water it will collapse.
thanks you
I am almost as impressed as the dog. This guy needs to be promoted to, well, something bigger.🙂
yes thanks you very much ❤️❤️❤️❤️
Better than I could do. That is some satisfying work you're doing while I watch you do it in this video. Great job
Yes, thanks you very much 👍
Magnífico! Gracias. Thanks. Merci. 😊🙏💚
Yes, thank you so much 💖💖💖💖💖
لطفا مارو حمایت کنید ❤
While it may not be the most effective or efficient damn, it’s still a good looking and working damn! Thank you for sharing, it’s cool seeing people figure out how to design and make things like this
Yes, thank you so much 💖💖💖💖💖
@@Tran-Chien ofc! Don’t ever give up :D
Cool project! Only one serious flaw I noticed was the lack of a curve or arch to strengthen the structure.
Yes, you are right
Someone is a thousand years is gonna find this and assume there were tiny people that built it for their ecosystem 😂
Thank you so much ❤️❤️❤️❤️
Wow,even better than the guys who build pools barehanded
yes!Thank you so much
I am in awe of the whole build!! That was AMAZING!!!
Yes, thank you so much 💖💖💖💖💖
I can't say I've ever been so bored I built a hydro-electric dam.
Very cool.
Yes.Thank you so much ❤️❤️❤️❤️
People like this man are the reason I had a great childhood😌
Thank you very much❤️❤️
What a masterpiece and a beautiful build too. Thanks for posting this as well. Have a nice day.
Yes, thank you so much ❤️❤️❤️
I love that man's creative genius that he has put to practical use,no matter of how he could have done it better,, the fact is this man rather than waisting his time put his God given brain 🧠 to work and put together a device that actually makes electricity,, and I agree with that person that mentioned that it would be a great place for school kids to come and visit to see what a person can do when they apply themselves and not wait for some sort of entitlement,,, good job there buddy,,God bless you and thank you for that video 😊
Yes, thank you so much 😊❤️❤️❤️❤️
The real accomplishment here is 8M views. The design was perfect for that. I’m sure he could have built a dam that generated way more power. I’m also sure that that wasn’t his goal at all. Perfect design for the goal intended.
Thank you 😊
Sin duda alguna, es un trabajo EXCEPCIONAL, mis RESPETOS 👏
Yes, thank you so much 💖💖💖💖💖
I'd like to see an update in a few months to see how well the soil walls are holding up.
Yes, thank you so much 💖💖💖💖💖
They won’t
You could see water penetrating the concrete at the top area near the turbines anyway. I'm guessing the dam didn't function for more than a day and stayed standing for less than a week. Channels like this make their project and then abandon it and go on to the next, they don't maintain any of the projects they build.
@@AbominationalFailure It's only made to film it for youtube likes for half an hour. Not at all for any kind of durability or actual use.
@@badscrew4023 that is the point I was making with my comment lol
This seems like a village paddy field somewhere in Asia. Villagers don't have separate water supply and walls between their fields. They depend on rain, and water freely moving from one plot to another.
What I'm trying to say is, he probably had to break the dam himself after making the video, so no need to worry about it's durability. But yes, there are design flaws.
Thank you so much 😊❤️❤️❤️❤️
Despite whatever "flaws" in the Physics, demonstrates clearly: Where there is a WILL, there IS a WAY. Human INDUSTRY and attention to detail at its finest, and a righteous sense of HUMOR.
👍👍👍
I can hear the voices murmuring in the ethers: I wish I'd thought of that!
Thank you so much 😀
I think if you put the turbine generator/fins lower, it would spin faster since there would be more kinetic energy of the water falling down.
Thank you so much
Kaplan turbines work on flow. Bernoulli's principal says flow in a pipe remains constant. So that would not matter much.
Francis tubines require more pressure but much less flow. They would benefit from being placed lower in the penstock, but that is not what he built here.
Молодец!
Просто и красиво!
Турбинки нужно опустить ниже (там давление выше)
В конце окончательно понял для кого был сделан мост.
Самая любознательная собака!
Все посмотрел, все понял и наверное надо надо собаке поступать в гидротехнический институт.
Yes, thank you so much 💖💖💖💖💖
Тоже не понял этого. Зачем строить высокую плотину, если турбина чуть опущена?
Very interesting to watch thanks CG. It just goes to show how much free power is produced from running water. Also enjoyed hearing the sounds of the speeded up footage and it's nice that the builders dog was part of the show.
Thanks for watching
Less than 5w? This was a bad design
I don’t know too much about hydroelectric power or it’s designs but I definitely give this gentleman an A+ in effort and ingenuity. Bravo good sir👏👏
Wow, thank you!
This man is the living manifesto of having too much time and ideas, and actually doing something at least something useful with them
Yes, thank you so much 💖💖💖💖💖
Helloo
Nahh, this is the manifestation of a proper work / fun balance.
Why do I find the sound of him tapping the bricks so therapeutic 😂😂.
Yes! Thank you so much ❤️❤️❤️❤️
This is really impressive. Thank you for filming this!
Yes, thank you so much ❤️❤️❤️
LOL this is not efficien solution at all :D you need transfer waret in pipe from the hill down to you micro hydro turbine, to make effecient power source. This is to make money on youtube, not to make energy. This is art, not engineering.
All you say to everyone is “Thankyou so much”
Got anything else to add? Care to elaborate occasionally??
That's seriously impressive.
yes thanks you 💖💖💖💖💖
What an excellent craftsman this guy is !
It would be very easy to increase the power output just by mounting the impellers on a longer shaft (with additional bearing to keep it central) so they are at the bottom of the overflow pipes , but that and the comments about the longevity of the design aside, it really is excellent craftsmanship !!
Yes, thank you so much 💖💖💖💖💖
Also, having multiple turbines on one tube would help, at least, last time I've seen something similar, it had multiple in one...
You know this was never intended to make power right? It’s purely to get views. They would have walked away from it the next day and never even cleaned up the mess.
I can’t imagine that flooding the area behind the dam by 5 feet would do much good to the area too.
@@Mi-ck it doesn’t really matter - it is just a nice demonstration of craftsmanship and nice to see something positive
@@adamrawicz-szczerbo8948 it's not positive though, that's the entire point
I pride myself on being mechanically and technically competent in a range of fields, I could wire up the electrical side of this project with no problems.
But here I learn that it's also very handy to have the skills to build the kind of structures which allow you to put those mechanical/technical systems to good use.
Now I want to learn how to lay brick and cement render like this guy! Cool project!
Do yourself a favour and watch some actually qualified people do this, especially some structural engineering because I can’t see this thing lasting for more than a couple of weeks
I’ve never built anything like this, but I could see many very weak places, or just plain flaws in this structure. The biggest thing I can see missing is that there is no structural reinforcement of any kind. No wire, grid, bars, beams, … nothing.
With that said, I acknowledge the craftsmanship of this thing. It’s just that it’s more of a miniature model than a facility meant to last.
Yes.Thank you so much ❤️❤️❤️❤️
Yes.Thank you so much ❤️❤️❤️❤️
@@xxmlgxx2151 I didn’t think there was any point in mentioning it honestly, but while we’re at it, the turbines will definitely rust, too heavy to be efficient and are practically at the water level so don’t get any of the speed the water gets while falling. Also absolutely zero safety when welding, if he holds it with his bare hands and accidentally electrocutes himself he’d be very dead.
I am amazed how he constructed a dam with a brick wall…. Even a small tank requires retaining walls 😅… even though there are lots of other engineering problems I like your craftsmanship 🥳🥳
Да вся конструкция простоит максимум два дня, пока грунт стенки канала не промокнет, вообще не понимаю, как кирпичная стена держит давление в тонну, если её с ноги можно поломать?
Well... it does look like it was maybe in China so..,..yea.. I mean, the Yangtze still floods and high rise building just randomly fall over there so... engineering isn't really their strength. Stealing others people's and countries designs and artistic property....now they are damn good at that! They excel in that realm!!!!
Damn,... hope I CZcams and Biden don't take what I said the wrong way. I don't wanna get banned from CZcams and...wait..is that a black helicopter heading this way.
Holy Crap! LeBron James is in the gunner position. Damn.... I've gone to far this time!
Dude, I'm amazed at how much " "basic" " eduction, common sense and experience was put in this video. The part when he uses a large pipe to bend the blades of the turbine so they have a more or less weldable curve blew up my mind. As you say there are a lot things that are wrong but I think this video is not just good because his craftmanship... If it serves to spark somthing in the mind of a kid or a teenager, if it serves to push them even if just a little to experiment and learn... I think that make this content also valuable. 😉
@@Marotonella You should watch some Pakistanis on YT working on vehicles. As a mechanic by trade they use primitive methods that always blow my mind.
@@juansolo1617 And they're working in sandals.
Congratulations to this guy. Having managed construction of a small micro-hydro electrical project (14-17 kva) with 2 separate locations and 1 mile of pipe between them. Access was difficult at my site and time consuming and involved 9 miles of barge/lake travel. Without knowing this man’s surrounding terrain I would find it difficult to be critical. Yes the turbine should be low, the dam should have wings and so on. Or you could lay a pipe siphon with valves across the top of the earth to his small generator. You already have the existing dam.
Yes!Thank you very much!
Looks nice but it's not making 14K lol maybe just enough to power the lights
Definitely want this guy on your team during a zombie apocalypse
thanks you
То чувство когда какой-то чел из Индии сделал больше чем ты за свою жизнь😂
Yes, Thank you ! Please subscribe to my channel and help me share ❤❤❤❤❤🥰🥰🥰
It’s always great to see design imagination at work. It shows there are many different solutions to the same problem: how to generate power from water flow. I take the comment about having turbines lower down but that would demand a different turbine design (perhaps a Pelton Wheel Turbine). However it’s associated generator would have to be kept dry and that would be difficult, placed at the base of the down tubes. The good thing about the design shown is that the generators are well above the water. Also, if the turbines fit the down tubes well enough and the water flow through them remains coherent (laminar flow) then the weight of water BELOW the turbine will also energise it. In other words, the turbine will be ‘sucked’ from below and ‘blown’ from above.
For me the question is ‘What diameter of pipe will produce laminar flow both above and below the turbine?’
This vid is a great contribution towards Appropriate Technology also known as Alternative Technology.
Brilliant video. 🙏🙏🙏
thank you so much 💖💖💖💖💖
@@Tran-Chien I will carry on thinking about this design. I suspect that long screw shaped turbines with a very coarse pitch would preserve the laminar flow of water as it passes down the down pipes. What I am picturing is a turbine similar to a worm gear but, as I say, with a very coarse thread of perhaps just two turns of the thread from top to bottom.
It might be good if the spiral was cut with the profile similar to an ‘acme thread’ profile. An acme thread is like a ‘square thread’ but with a more angled ‘shoulder’ to the thread. Why? This profile would force a small percentage of the water flow into the small gap (clearance) between the turbine screw an the wall of the pipes. This would prevent direct contact between the turbine and the inside of the down pipe it was sitting in. This would a) massively reduce friction, b) minimise wear, maximising the life of the turbine c) ‘centre’ the turbine within the down pipe, stabilising it. This would eliminate vibrations. The ‘elongated worm gear turbine’ would enable that idea I mentioned that with optimal design, the turbines would be ‘sucked’ from below as well as ‘blown’ from above.
Another appealing aspect of your design is that it is made from available components. As for the ‘elongated worm gear turbine’ this could be made in hardwood and turned in a screw-cutting lathe. Alternatively it could be sourced as a spare part Archimedes Screw as found in domestic kitchen meat grinders.
Ideally the thread should have a longer pitch than the typical meat grinder screw, but I think a meat grinder screw would help with preserving laminar flow.
Finally, the longer the pitch of the screw turbine, a) the slower its rotation and b) the higher its torque. High torque and low RPM would enable any direct coupled generator to work at a corresponding low RPM, reducing bearing wear.
If the generator is designed to work optimally at high RPM there could be a gearbox between the turbine and the generator.
The scope for development in your system is very high.
As I see it, this is an alternative technology suited ideally to small scale power generation with perhaps one system supplying power to a maximum of about three households.
The design could be replicated many thousands of times within the skill range and parts available almost anywhere in the world where water flow with a ‘low head’ of about 1-2 metres can be arranged.
I admire your work which I think could have a very widespread beneficial impact.
I hope you can find collaborators who know how to calculate the relationship between fluid dynamics, turbine design, generator RPM and predicted generator output. Alternatively you can optimise your system by trial and error. It only has to be good enough. It has been said ‘Don’t let Perfection be the Enemy of the Good!’
when you said something about a vacuum effect, I assume a tapered end would work if the math is done just right. Too much water, it doesnt work, too little water, it doesnt work. You know how that goes :p
@@EvilNeonETC That sounds like a good idea. Thinking about it a taper might make the water accelerate although, as the mass of water would reduce towards the bottom end, the effect of gravity (the ‘suck’) might be less too.
In power station design, the high pressure end of the turbine (first stage) is smaller than the low pressure end of the turbine. These turbines increase in diameter in three steps, I think to extract as much kinetic energy from the steam as possible. However water behaves very differently to steam, being uncompressable. As laminar flow in water is our objective here, I think having a reducing taper could be a good idea 👍
@@EvilNeonETC Also, further to my last comment the amount of energy in the water is less at the top and potentially more at the bottom so tapering that is the reverse of a steam turbine makes good sense. I’m thinking that the rate of transfer of energy from water flow to turbine should be the same along its length… so yes 👍 Steam Turbine blades are also angled differently at each stage so maybe the pitch of the turbine blade should also vary along its length 🤔
The spillways may be insufficient to prevent degradation of surrounding dirt wall under torrential rains. I recommend concreting the walls as well using wire mesh backing.
Yes , thank you 👍🤞😍
I was surprised this one held the weight of the water being so tall with no support on the down stream side . Which he has put more engineering into others I've watched.
But I guess he has the minimum engineering down to a science by now , knowing what will last long enough , then be easier to demolish and remove .
The engineering and investment would be out the box crazy to make it last even 1 year through the rainy season I bet. And I think all you could hope to generate electricity wise probably wouldn't even equal a small 1000 watt gas powered generator that you would get 5 years of on demand electricity out of for $2-300 dollars .
And then he probably doesn't even have the water rights to divert that much water a year ?
Can't believe that dam is holding all the weight of that water.
yes thanks you very much ❤️❤️❤️❤️
He can be the "Dam Builder's" channel, I will be the Dam Busters" channel LOL, id love put a stick of power gel on the main wall or down a shaft lol.
This dam looks really cool and took a lot of effort to build for sure. Although I am having some second thoughts on the design decisions. The wall of the dam is not built into any recess in the wall ant it is also not curved at all like all full size dam walls are. This usually helps to withstand high water pressures. Now, the video shows that the dam apparently is strong enough as is, but still - it could be much stronger. The wall is also additionally weakened by the channels alongside the channel walls that support the dam. Now, I am not an expert, but maybe this dam won't withstand the force of the river carrying high waters as is has been designed right now.
Yes .Thank you so much ❤️❤️❤️
It's also not holding back anywhere near the water pressure a full size dam is.
@@randybobandy9828 Yeah you're right, but it's also much thinner and not built out of concrete, like a full size dam would be. It is a scaled model, which is true for the amount of water it is holding back but also for the structure itself.
Bad design. Will not hold up.
I’ve got a limited amount a highly limited amount of construction experience and no I agree the wall won’t last there’s no concrete stopping erosion on the sides of those u shapes to redirect water the wall isn’t thick enough to hold that kind of weight back for a high amount of time the designs cool he just didn’t put enough meat to the damn and redirects
As you are getting better at this all (well, you were always GREAT!) you may want to start adding a voltage meter to show how much power your future damns can make.
Thank you so much 😊
Need to measure both electric current and voltage to know the power at any moment.
i love the fact that there is now a hydroelectric dam engineer community on youtube
Yes, Thank you ! Please subscribe to my channel and help me share ❤❤❤👍
He even made a little railing so the cats and rats could cross over to the other side. Now that's classy.
Thank you so much 😊❤️❤️❤️
As always; amazing work. I wonder how many hydropower plants has this guy built? His whole neighborhood should have one in every corner by now.
Thank you so much 😊
How many kilowatt hours Total this one guy has produced. Probably more than the Hoover dam.
he even though about animals friendly passage!
@@garrysekelli6776 none because this design doesn't produce any usable energy, turbines need to at the lowest point of the dam to use the potential energy of the height delta
built only to watch this video - CZcamsr
Man builds dam, I watch man dam, I approve of this message.
Thank you so much 😊
One is amazed at insect building behaviour but this Guy tops the lot!
Yes, thank you so much 😊❤️❤️❤️❤️
Super cool video. Reminds me how much we are capable of, even if there are some design flaws. I want to build something now
Yes, thank you so much 💖💖💖💖💖
@@Tran-Chien 0
That's neat as hell. He spent alot of time on that project.
Yes, thank you so much 😊❤️❤️❤️❤️
Curious to see how this project has held up, any update vids? :D
Best 15 minutes and 16 seconds of my working routine today
Yes, thank you so much ❤️
the hydrostatic pressure of the water reservoir would made the brick wall collapse on the first heavy rain lol . Nice artistic video still.
Yes, thank you so much ❤️❤️❤️
This guy is so creative. Bravo!
Yes, thank you so much ❤️
Post the real time version of this as well as this accelerated one.
I, for one, could watch that as long as it takes start to finish.
Fascinating, educational AND entertaining.
BTW, how many hours on this project?
Thank you so much
Finally a CZcams recommendation worth watching.
Yes.Thank you so much ❤️❤️❤️❤️
Круто, золотые руки и здравый ум!
thanks you very much 👍
Энергия падающей воды даст больше мощности. Внизу надо было ставить крвльчатку
Yes .Thank you so much ❤️❤️❤️
This vid makes me appreciate people. He is an inspiration.
Yes, thanks you very much 👍
The dog looks like it's mindblown by the design lmao
Красиво!
Но обычная водяная мельница намного эффективнее, и из неё можно извлечь пользу. А это просто игрушка
Yes, Thank you ! Please subscribe to my channel and help me share ❤❤❤❤❤
This is amazing, sir. Thank you for sharing with us. You've got my attention from beginning to end. 🙌
Wow, thank you!
Imagine having this as a child, powering your toy city where you can drive around with your mini rc cars and boats ^^
Yes, Thank you ! Please subscribe to my channel and help me share ❤❤❤❤️❤️❤️😍
Loved the sound of the bricks being laid 😂😂
yes thanks you
The previous remarks do go to the betterment of the design. My experience with water at this scale points to erosion eventually destroying such beautiful work.
As a model, these designs create enormous possibilities for new projects.
Always remember that the water at the base weighs more than at the surface thus the pressure will eventually seep under the barrage's footings.
Another application might adopt a water wheel on axle to drive the turbine on a dry land position.
Regardless, we see brains at work here with different designs. Strength is the priority if the project is to survive.
A small ditch of this sort is not to be misjudged.
Yes, thank you so much 😊❤️❤️❤️❤️
This was so cool. And something DIY that anyone could do who lives in area where power is unavailable or to expensive. Anything is possible. Again this was awesome 👍👍👍
Thanks so much 😊
All good until your neighbour living downstream gets annoyed and starts building a working model of a Lancaster bomber...
Thank you so much! Subscribe to my channel to watch more of my interesting videos ❤❤❤😍😍😍
Um ótimo projeto... 👍🏾
Yes, thank you so much ❤️❤️❤️
@@Tran-Chien😊❤r
Не нашёл коменты на русском и решил написать сам ).
Поздравляю!
Вы постепенно увеличиваете высоту плотин)) и делаете уже почти высоконапорные гидротурбины )))
Yes, thank you so much 💖💖💖💖💖
Everyone makes jokes about watching 2 Indian guys making pools at 3 am when we where 8, but this is what we really watched.
Yes, Thank you very much ❤️👍🤞
Someone's grand-kids are getting an A in Science.
yes ! thank you very much!
Ficou muito bom 👏
Thank you so much ❤️❤️❤️❤️
@@Tran-Chien yuvraj syangtah
Brilliant, and the amount of efficiencies you'll gain in a rebuild (once you spot them) are huge. Use the water weight more and you'll be shocked at what you'll gain.
Yes, thank you so much 💖💖💖💖💖
Civil engineers and hydrologists in here eating this guy tf up lol.
Yes thank you so much 😊❤️❤️❤️❤️
Thanks for making the dam video. Really appreciate your dam construction technique. Dam content is so much more interesting than so much else on CZcams.
yes thanks you very much ❤️❤️❤️❤
even the sounds of the water flowing are wounderful
Thank you very much!
@@Tran-Chien your most welcome
Great idea in general. Obviously there could be improvements to efficiency and durability but the video did a great job of just showing what is possible.
Thank you for sharing and putting so much work into the project.
Thank you!
❤
The dog makes the video 1000000000 times cooler 🥰
Thank you so much
I think this can be interesting! Can you build mini city?if yes bild pls
Thank you so much 😊❤️❤️❤️
@@Tran-Chien =)
This was really cool to watch. I was kind of intrigued by how you didn't wear gloves, even when welding.
Yes, thank you so much ❤️❤️❤️
I bet seeing all these dams at night with the lights in full shine is very fulfilling for you. It like a long day doing yard and just being able to enjoy it at the end. peace and quiet. Nothing beats nature
Thank you for your support! Subscribe to my channel to watch more of my interesting videos ❤❤❤❤❤
Give this man an award!!
Yes, thanks for your support ❤️❤️❤️
you have to give it to him he can work for a dam building company he can really save lots of lives and another thing i wanna give you a idea to a dam could you possibly make one that uses wind to let water out it would be really cool instead of polluting the world great job mate!
You have beautiful ideas I like your videos 👍👍👍👍👍♥️👈
fully watched 👍
Thank you so much 😊
That was pure pleasure to watch... many people dream of doing this, and you actually did it... really impressive
this guy is like a beaver, he keeps making dams everywhere. How many has he made? 100? 200? more?
This is what CZcams was made for
Yes, Thank you for watching the video! Please subscribe to my channel and help me share ❤❤❤❤❤❤❤