Video není dostupné.
Omlouváme se.
PEAK DESIGN MICRO CLUTCH First Look: Why Didn't They Make It Arca Swiss Compatible?!?
Vložit
- čas přidán 18. 08. 2024
- I take a first look at the new Peak Design Micro Clutch for mirrorless cameras and go over a few key design choices.
The Micro Clutch: peak-design-mi...
Instagram: (@hall.of.the.wild) / hall.of.the.wild
My Preset Packs: www.hallofthew...
Join me on a workshop: www.hallofthewildstudios.com/workshops
My Gear
Main Camera:
(Adorama): howl.me/cjmJzB...
(Amazon): amzn.to/3ftxI1f
BEST All Around Camera: howl.me/cjmJDk...
Favorite Small/Travel Camera:
(Adorama): howl.me/cj7O91...
(Amazon): amzn.to/44ytidR
Favorite Drone: howl.me/ckWQQH...
Lenses
Favorite Wide Lens
(Adorama): howl.me/cjmJH0...
(Amazon): amzn.to/3y7CxUA
Favorite All Around Lens:
(Adorama): howl.me/cjmJI9...
(Amazon): amzn.to/3y3rdc3
Favorite Telephoto Lens: (also, my favorite lens overall)
(Adorama): howl.me/cjmJL3...
(Amazon): amzn.to/3dWLI38
The Best Medium Telephoto Lens: howl.me/ckWQT7...
Best Budget Telephoto Lens: howl.me/ckWRLX...
Favorite lens for filming: howl.me/cjmJM9...
Tripods
Favorite Overall Tripod: bit.ly/3EWSMqQ (Use brent5 at checkout for discount)
Fancy Travel Tripod: www.ulanzi.com...
3-In-1 Travel Tripod: heipivision.co...
My Star Tracker:
(Adorama): howl.me/ckWROV...
(Amazon): amzn.to/3M04h39
Bags
My Main Bag: shimoda-design... (HALL10 for discount)
Smaller Camera Bag: shimoda-design... (HALL10 for discount)
Favorite camera strap: amzn.to/3M1P5mg
Capture clip (for backpacks): peak-design.px...
Favorite Sling: peak-design.px...
All Around Non-Photo Travel Bag: peak-design.px...
Mics
Main Mic: howl.me/clbLYy...
Backup mic
(Adorama): howl.me/ckWR0r...
(Amazon): amzn.to/3UYMugh
Filters
Best Magnetic All-in-one VND/CPL Filter: amzn.to/3QLvASD
The Best Hybrid VND Filter Kit: amzn.to/45gYBdP
Magnetic VND & CPL Kit: howl.me/cj7PjT...
Lights
Favorite RGB Light Panel: shrsl.com/4amnh
Studio LED Lighting Kit: shrsl.com/4amnm
Mini RGB Light Tube: shrsl.com/4amno
Follow me on social media!
Instagram: (@hall.of.the.wild) / hall.of.the.wild
Facebook: / hallofthewild
Website: www.hallofthewi... (Workshops, presets, & more)
So, Peak Design saw this video and they emailed me a couple bits of info about the play in the ARCA connection the plate removal:
From the PD team:
To cut down on any wiggle of the plate, the screw is meant to be attached to the ARCA plate (5:18)
When removing the plate, it is best to use the embedded tool for easy and quick removal (5:44)
Here’s an instructional video the team put together for Micro Clutch that helps outline some of these best practices: bit.ly/3oLagBF
Just what I was gonna say. I've seen their video. Of you can pull that bottom piece off by hand, it will eventually come loose when you don't expect it because the force applied when using it is in the same direction you just slid it to remove it. Always use their little screwdriver/wrench. You really only need to loosen it enough to slow you to twist the bottom piece aside to expose the battery. But you DO need to loosen and tighten the screw with the tool.
I bought one of these thinking that it might be better than the Small Rig plate I had on my Fuji T-X5. The Small Rig plate has integrated Arca Plate and access to the battery without removing the plate. Having seen no upside to the Peak Design plate compared to the SmallRig version, it has now been relegated to the "drawer of regrettable purchases". Anyhow, I'm sure it serves a purpose for others but certainly had too many design issues for my liking. Great review BTW.
Thanks for the review! Your opinions are always subjective and practical. Thanks for helping us all make informed purchasing decisions!
You bet man, I'm glad it helped!
A company as big as PD do they really need to kick start a product?
It's their choice to promote new products and build community. I guess, it allows them to rump up production and sales faster and with less uncertainty than with no Kickstarter.
Creates a buzz and with the limited time discount people feels an urgency to buy.
At this point, it's just a marketing strategy.
I own and love many of Peak Design's products. However, blocking the battery door is making this PD Micro a no go for me. Having to free the base plate with a tool (provided and imbedded in the base plate) just is too troublesome. Brent, the demo of of using the magnetic on off of the base plate does seem a little better way to access the battery compartment. I supposed I should give it a chance.
Hi, Brett. I have Peak Design's CL-3 hand strap on my R5. I don't use that plate like you have because I have an L bracket mounted. The strap's bottom loop is attached to the loop on the L bracket. I can change the battery easily by just flipping the strap away from the battery door.
On occasions of extended hand-holding shoots, like family events or street shooting, the clutch is very handy (so to speak 😉). The R5 is easy to hold anyway; but with the strap, I can relax my hand when not shooting. My only issue is that it's hard to access the top dial to change shutter speed; my index finger is pretty much locked atop the shutter button. So if I have to change settings frequently, I just grip the camera over the strap without removing it. It's not in the way at all.
I am a double micro clutch backer and discovered POST their KS campaign that there is no way to attach other carrier systems (Cotton Carrier / Spider Monkee &/or Pro) to either the plate itself nor the square tripod plate. I think Peak missed this but perhaps they didn't so one is forced to include their capture device. If so very clever so they get additional sales for their product BUT it's a little frustrating as I really like using my existing Spider Pro plate via my hip or Cotton Carrier Skout on my chest.
Had they included a 1/4 inch internal thread made within the arca Swiss plate it would of been a much better option as PD would no doubt miss out on sales because of it. Had I of picked this design flaw up PRIOR to backing it on KS I may have given it a miss.
Either way I'll still use BOTH clutches as I ordered TWO (one for my Fuji xt body and the other for my Fujifilm Pro4 when it finally drops in late 23 / early 2024.
Any thoughts from others in the same boat as me on this?
Doesn't look like the type of thing that I would use. When I first got my R5, I went months without any type of strap at all. Finally I decided to try the cheap neoprene wrist strap that came as a free "bonus" with my Tamron 150-600 lens. I love it. It gives me just enough extra peace of mind, plus it does have the quick release clippy bit so that I can take it off when on a tripod. Considering I rarely ever put my neck straps around my neck, but rather just wrapped them around my wrist, this is perfect.
Thanks for pointing out the obvious that I missed the installing this clutch. About the easy slider to access the battery compartment on my R5 & R6. However I would like it to be more secure than the current design. The strap feel cheap and the old style from them was far better in term of strength and security. Properly won't use it, Felt like its a waste of money.
I just bought the clutch, wrist strap, full slide, 10L sling and messenger bag. I'm using the wrist strap and cloth together because of you're in a place where someone or a dog could knock the camera out of your hand purposely or accidentally then the wrist strap will keep your heart from falling to the ground and is a bit of an anti-theft strap... not if they have a knife to cut the strap but at least something. I was at a dog park with a friend last October and his dog ran by and knocked my EOS R with battery grip and 24-105mm F4 lens to the ground. Nothing broken but I'm not making that mistake again. The wide slide is just more comfortable.
OH nice! I've really been liking the 10L sling, but I think I might be interested in getting the messenger too, for when I want just a bit more carrying capacity and still not use an actual backpack. I think a clutch style strap would probably help in that scenario you mentioned too.
@@BrentHall The messenger bag like the 30L daypack v2 isn't as sealable weather wise as the 10L sling, so it's a bag that is great for good weather.
When I got the email about the kickstarter I immediately went to check it out, because I've been wanting a grip strap for my RP and this seemed like it'd do the job nicely. But, the base plate is what killed the sale for me -- no battery access without finagling with the plate was a huge deal breaker.
Exactly can’t imagine every time you want to change batteries you gotta take the base plate off.
I have the original PD Clutch, and while I love it, I do wish I could remove it quicker than I can, there a lot of times where it's just a annoying to shoot with it attached. This base plate is a neat idea, I don't like that it covers the battery compartment, but it did seem like you could remove it quickly and easily, so might not be the end of the world if, like me, you're not mounted to a tripod for the majority of your shooting time. That said, the strap itself on this one doesn't look nearly as comfortable as it's bigger sibling.
Why not directly integrating their capture clip into the base plate? Would make it both arca swiss and PD clip compatible at the same time.
I had the capture on a Nikon P900, and the small surface of the capture against a body made of plastic did not go well. It broke of the bottom of the camera.
I am a fan of PD stuff, this one is a miss to me. @peak design please offer a bigger wrist strap. The wrist strap is my preferred way to secure my camera it's just a little small for my hands but I make it work.....almost forgot, find a way for your capture clip arca adapter to lock in so it can't twist.
There is the original PD clutch if you want. They also have a wrist strap. What is it that you are missing?
I’ve backed this to use on my R8 or M6II and for the discount on regular PD products. I really like PD, but I do wait for discounts before buying :)
Yeah, anytime I can get discounts on their stuff, it makes much more plausibly affordable for me too, lol. Having so many bags as I do and wanting to have the capture clip on all of them plus the base plates for all my cameras really adds up!
I'm too much of a klutz to trust myself with anything like this. For me, it's over-the-neck camera straps only!
So does the clutch quickplate from Peak design support Arca swiss or not? xD
If you're talking about the actual micro clutch metal plate, no that is not arca swiss compatible. That's why they made that magnetic plate attachment that slips in for their PD quick release system. With that then attached, it will work with all their mounting and quick release stuff, as well as arca swiss tripods and mounts.
2:37 the plate is wrongly installed, just saying...
Thanks for the review Elon Musk
its because they want you to buy their ludicrously priced tripods!!!
I mean, I really like a lot of their stuff, and the company itself is full of great humans... but I'll never buy that tripod, lol.
@@BrentHall yeah, i feel like they seem like nice hearted people.. especially considering that they started as a crowd funded company, i was just trolling hehe. I have a strap and want to buy another, and as much as I want a tripod from them I wont pay that much. I love their camera bags too, they're super cleverly designed.