How To: Install 07-13 Toyota Tundra & 08-17 Toyota Sequoia LED Headlights | FORM Lighting
Vložit
- čas přidán 22. 07. 2024
- Get your LED Headlights for the 2007-2013 Toyota Tundra and 2008-2017 Toyota Sequoia here:
07-13 Tundra: www.formlights.com/2007-2013-...
08-17 Sequoia: www.formlights.com/2008-2017-...
0:00 Introduction
0:13 Removing Trim Panel
0:50 Removing Stock Headlight
1:36 DRL Fuse Tap Harness
2:17 Installing FORM Headlight
3:01 Testing for Functionality
3:07 Installing Included Trim Panels/Reassembly
3:47 Conclusion
In this video, we show you how to install our LED Headlights for the 2007-2013 Toyota Tundra & 2008-2017 Toyota Sequoia. A full-LED upgrade for your factory halogen lights is a great way to modernize your truck and provide the performance you need.
These headlights feature the newer styling found on premium trim levels of the 2018+ Tundra, with added features such as sequential turn signals. The newer styling is a great way to refresh the look of your truck and give it a serious update.
They feature full-LED function, including low beam and high beam. Using modern, application-specific optical reflectors, these lights produce much higher intensity and output than the factory halogen units.
The most distinctive part of these headlights is the integrated LED daytime running light, or DRL. This illuminates when your truck is running, with a brilliant and noticeable white LED accent. Even though the factory headlights don’t have DRL, installation of this feature is simple thanks to the included fuse tap.
These headlights feature an integrated sequential LED turn signal. Every time the turn signal is activated, amber LEDs flash across the middle of the lamp in a smooth, chasing sequence. When you’re finished making your turn, they automatically “switch back” to the bright white DRL.
Even though the headlight style changed over the years, these lights bolt right on the factory mounting points. The only difference is a small trim panel that goes under the headlight. A pair of trim panels are included with your purchase, which you can either leave matte black or paint to match your truck.
Form Lighting headlights are built with quality in mind, using OE-grade materials and design techniques. This includes durable UV-coated polycarbonate lenses, automotive-grade LED emitters, breather vents, and OEM plug-and-play connectors. Rest assured that these lights will provide durable and superior performance.
Form Lighting headlights meet all SAE, DOT, FMVSS, and CMVSS standards and regulations for legal on-road use in the United States and Canada, when installed and aimed properly - which is easy to do with the integrated screw-type adjusters.
Our headlights for the Tundra & Sequoia are plug-and play for the main functions, along with a fuse tap if you’d like to enable the daytime time running light feature. They were designed to plug into your factory headlight connector and work correctly with the factory electronics. No errors, flickering, or hyperflashing!
All Form Lighting products are rigorously tested for reliability, and backed by a two-year warranty. The warranty is supported directly by Form Lighting, and any replacement parts, if needed, are shipped quickly from Form Lighting’s US warehouse. On the rare occasion that you may need to utilize your warranty, we try to keep the process as simple as possible - for example, no return is normally necessary.
Thanks for watching!
How to aim your headlights:
www.formlights.com/blog/how-t...
Follow us on social media!
Facebook: / formlights
Instagram: / form.lighting
TikTok: / form.lighting
Love those headlights but also the Grill is gorgeous
We appreciate the support!!
They look good! I have a 2012 Sequoia with the headlight washers. Questions:
1) do the trims that are included have those smaller plastic covers for the washers?
2) I’m a dummy when it comes to DIY stuff. Is there a more complete step by step video on connecting the included harness? Would you route them in front of the engine/radiator?
Hey there! The trim piece we include will fit flat and does not include small plastic covers. For more detailed install instructions please refer to our written install guide here:formlights.com/blog/how-to-install-form-lighting-2007-2013-toyota-tundra-2008-2017-toyota-sequoia-led-headlights
If you have any additional questions our customer service team would be happy to help as well! I will link their info below.
Hours: Monday-Friday 10 a.m. - 5 p.m.
Email: contact@formlights.com
Phone: 636-748-4444
Where is the grille from?
2020 Sequoia TRD, explains the one inch gap towards the bottom
I ordered these lights. My harness came with two 15fuses. The original 10amp fuse prongs are too short.
Hey there! Sorry to hear you're having some trouble. Please go ahead and shoot us an email at contact@formlights.com with some photos of what you're seeing, and our service team would be happy to help you with that. Thanks!
Was this resolved. Just starting installing and have the exact same issue
Just started installing mine and have the same issue. Supplied harness is shipped with two 15A fuses and the ignition only requires a 10A. Factory Toyota fuses are not compatible with the supplied fuse holder. This is certainly something that should have been addressed as there is no other supplied instructions in the box.
Very nice upgrade, what’s it cost?
Here's the link to check them out! bit.ly/3hRpuBA
Nice looking truck! Year? Gear?
Hey there! This is a 2011 Toyota Tundra.
I would like to order that grill for my truck, would you give us information on how to do that
Hey there, that is not a product we offer. This was a customers truck that we used to install our lights on.
Do you think it'll be possible for you to get that information from your customer and pass it on to us ? Please...
@@JoseSanchez-ox1le It is a TRD pro Sequoia grille.
Anyone have a part number for the grill??
This is a TRD pro Sequoia grille.
What kind of grille is that
It is a TRD Pro grille from what we have been told!
No mention to proper adjusting of the headlights.
Hey there! These headlights include two adjustment screws that make it very easy to aim them after being installed. We include this in the video description under the section about them being SAE and DOT compliant.
Guys, but if you're gonna do a video you should do it right. I just installed these. It came with tails that obviously were for another model. But there was nothing in the instruction that said that was the case. In addition, you should have mentioned that for some of the wires like the one that has the indicator bulb in the old headlamp, should just have the bulb removed and the wire stuck back in the cavity. In other words, there are going to be more factory wires by default a few of those not being used. That was perplexing especially to someone like myself who is not a mechanic. Also, how on earth do you adjust these things? I've turned both of the discs; upper and lower and the lights don't move at all???
Hey there! Thanks for the feedback. We haven't had any reports of mismatched connectors at this point in time, but we would like to note if that is the case. We did note that the headlight leveling connector won't be used at the 2:36 mark, as these do not retain that functionality. If you're having trouble aiming them, please go ahead and give us a call at 636-748-4444 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at contact@formlights.com, and our service team would be happy to help you with that.