Magnet fishing. increase your finds when out magnet fishing in canal's and rivers
Vložit
- čas přidán 21. 10. 2017
- Thinking about starting magnet fishing??
please visit my link below
Beginners guide to magnet fishing: • Beginners guide to mag...
Having problems finding things out magnet fishing one big problem is when you pull your magnet towards you the magnet often tips up and not level on the canal or river bed.
In my my I show you a easy way to help keep your magnet flat on the canal or river bed....
I AM NOT THE FIRST PERSON TO UPLOAD A VIDEO ABOUT THIS...
Watching you at work with the knife, I must say I'm amazed that you've managed to get through life without losing any fingers!
Only one finger?
He’s from the UK they can’t own guns or knives. They don’t know how to use either of the two!
I like the idea. Seems like it will prevent my magnet from being snagged.
Newbie to Magnet fishing here so a great tip I shall apply :)
One of the most helpful magnet fishing videos ive seen. Thanks!
+Tom Collins Thank you very much mate ..I can't wait to get out magnet fishing this summer time..
Magnet fishing UK
Hey no problem at all. I just started yesterday and am not having the best luck but it's fun anyway. I decided to blame it on the strength of my 250lb magnet and bought a 1000lb yesterday. Let's see how it works!
@@T180 and 1000 lbs works fine?
Thanks for your ideas. I will redo mine, your way will be much better than what I did with mine. Thank You very much. Good Luck Fishing.....
Probably should get one of them plastic inserts for the top of that lid where your rope goes through overtime I'm sure it will cut it. They sell them at Pep Boys for like when you drill through your firewall of your Jeep or car to run a wire through. Stops the wire from dragging on the firewall as you pull it through. In this case should have stopped at rope from constantly rubbing against set sharp part of the cap. I'm just starting out just ordered a thousand pound magnet from Amazon I've been watching the hell out of these videos. I thank you for your time
Grommet is what your needing
Very clever mate... thanks for sharing
Heating a magnet causes it to loose its magnetic properties just buy a double sided magnet
thats the reason i had to buy a second magnet a double sided magnet.Because when i pulled it towards the shore i saw that it flopped over to the non magnetized side of the magnet lol
Cooling the magnet will restore its magnetism. Unless you threw it in the fire and completely destroyed its magnetic properties.
I accidentally heated mine up but 10 min in the freezer and it was as strong as ever.
Also, double sided magnets won't pull as strong as single sided ones. I have a double sided rated for 600 lbs on each side, 1200 as a whole. Straight up and down it has not even the same strength as my 200 or 500 lb sindle sided magney
Double sided magnets aren’t efficient aswell I own a double sided magnet but I’m gonna buy a 360degree magnet
Great idea!
Great idea ! Cheers n thanks
just thinking if you add another string that comes up above the magnet about a foot long with a water bottle upside down with the cap on,it would act like a float to keep the magnet up right as it sinks down to the bottom and so forth as you drag it.but what do I know.
me and my mate are just about to start with the magnet fishing and this is the best idea i have seen so far , and makes great sense , cheers mate an i'll let ya know how it goes , you have another 2 subscribers as well
+baz 2 new subs??
What if it lands upsidown??😭
Brilliant idea!
+JustMe and it works great mate
for everybody saying what if it lands upside down, the magnet is heavy.. clearly heavier than plastic. so that means the magnet part will be on the bottom 97% of the time (not actually just to show)
Its worth a try .. cheers
would have left the top round so the weight of the magnet would roll over to the bottem to land the right way up and left a bit more plastic to seal up the end
Pointing a sharp knife right at the palm of your hand? What could *possibly* go wrong?!? 🔪✋😱
Ingenious
Great video. Subscribed
awesome
cool idea
how would respond two double sided magnet just they way you position it ? brilliant tip mate
good thinking :)
Great video
Hi from the usa,Muskego,wi.I was thinking about using a plastic funnel,seems stronger,smooth,mabey a goose neck type,what do you think?
I learned simple stupid with my magnet, anything I added to it made it worse. I use to have a shielded one with a long eye bolt (because it fit) and a bottle top added to keep it from snagging non-metallic stuff along with a large rope. I now have a non-shielded neodymium magnet with an eye bolt and rope. The downside, it's lack shielding, the magnet is more prone to breaking but I haven't had an issue with that yet, it can grab random stuff at times. The upside is I can catch stuff easier with the sides exposed, which makes dragging better, I also have thinner, more robust rope that's closer to it's weight rating (not so overkill) that's easier to toss with, and the eye bolt was cut down so I could pack the magnet away better.
👍Good idea for existing single sided magnets. The Cone shape magnets (Brute Magnetics Cone Fishing Magnet | 575 lbs Rare Earth Neodymium Magnet) takes care of this if buying new. Little pricey though ~$60 USD. It still seems like a good idea for all magnets as a little added protection from scrapes and chipping the magnet on sharp rocks. 👍🧲
This would help prevent snags to yeah ?
Does this work well? It seems a huge improvement but does it not get pulled along on its back?
Sweet
Can you please explain how this would help as it puts a layer of plastic makes it easier for it to slip off ?
Nice video,has this improved your success with magnet fishing? Also i'd like to say where are you from? Sounds like West Yorkshire, possibly Leeds as you sound a bit like Keith Lemon and i'm a Bradfordian so i guess i'd pick up on that maybe?
that hot heat will make the magnet week
Interesting
Good idea! 😂😂
Dribbling Dragon, you have a fan in the U.S.
would it be best to make it completely water tight , so the magnet doesn't rust ??
Has anyone ever tried attaching a float to the magnet? The right amount of buoyancy would keep the magnet upright allowing the magnet to cover the ground more lightly making the retrieve easier. Suitable tough floats (that would throw well) are made for commercial fishing.
Under the water isn't always the same height.. It can drop off slowly
And... have you already try it? I know by my public Flemish lady (who's usually work on her back), both side attracting, that you catch much more out of a pond, so I belief it would work fantastic. While I was watching your video I remember what The Black Crow have said that the rope is wear out. Take one or two meter of garden-hose of different much thicker hose, because I use a Power pull magnet with a much thicker rope and slide that over your rope and keep it on place with a shrink sleeve.
+Obelix Magnet Fishing Bril
Obelix Magunet Fishing
Yes???
Thanks for the tips! What knot would you recommend to connect the magnet to the rope?
Thank you
Palomar. Always and only. Get some quality heat shrink and toss it on the knot and tag end just for abrasion resistance.
Oh ok ok, thanks sure ❤
Was wondering how someone had their magnet to be this way. I thought they bought it like that. May do this also to mine.
i was thinking of the same problem and thanks to you problem solved.where do you get the large magnets from ?
Ebay mate but they are only 63 kg so you cant get a lot, if its your new hobby trie get a 200kg magnet
The benefit is good like you say..... but getting it land right way down is gonna be a challenge
bandiflip lol
buy a double sided fishing magnet
What would be better is to buy the modular magnets if possible
Try 4 circle magnets pirimid style?
What happens if magnet dos not land on its face when thrown ?
So glad I saw ur vid before I bought my magnet, good info?
+Voklst Westie thank you for watching
+Voklst Westie thank you for watching mate
Whats the deal with the giant hoop ring ? Id cut that off
Using a N52 magnet and a rope, I found a WWII submarine but I have no place where to keep it !
This is going to snag.
Unless I am dead wrong, the basic concept is to keep the magnet clean, which prevents foreign substances from entering between the magnet and the magnet edges.
I question how the rope or string going through the bottle cap opening you drilled, don't you think the rough hole will fray your string or rope.
If its a good rop its ok i had no problem with using it mate,, sadly i dont have them magnet now
@@Throwing-Magnets why
@@wakeuppeople1334 Probably at the bottom of the canal with a bit of frayed 'rop' attached to it
I want to start magnet fishing what would you recommend I was going to just buy a £50 1500 kilo or 1000lb weight and do this to it for my local Ponds and canals??
Mate start with a 200kg or 300kg
I'll tell ya what.... its a good idea but if you get a much shorter eye bolt it would work out even better
What if it tips over on its side?
Hilarious
What you should've done was cut the jug 4 or so inches further down and you'd have enough plastic to close the bubble.
How does this set up work if you’re going straight down from a boat?
stop the boat and fish :)
good trick for but. But I will get a double sided magnet with the metal eye on the side instead of on top.
That magnet doesnt look too strong, what strength is it?
Probably around 250-400 lbs.
I had more luck repotting my plant in the other half of the plastic bottle
Putting a layer between magnet and metal,wekens the magnet,by a lot.,you pulled that metal off the magnet,like it was a ferro magnet not neodinium.
Well good luck taking somthing heavy out of the water.
I'm sorry but can someone explain why this would help the magnet stay up right? I can see why it maybe would help you from getting snagged because of the cone shape, but looking at it, I would think the magnet could very easily get dragged on its side or was that not the point of this video?
agree
Does anyone know if this method works from actual experience?
Nope
If you get a doubled sided Magnet you don’t have to do this!
watch your arms WOOO lol lol.
actually if you pull the rope while perpendicular to the magnets surface, you will be sliding it off rather than securing the object
The plan is to keep your magnet flat to the bottom of the canal o
But thankyou for watching and taking the time to comment
Well if you are dropping the magnet straight up and down, wouldn’t you want the magnet facing down? With this setup, if you let the magnet hang, the magnetic surface is parrallel with your rope, right? So you would be sliding the magnet off whatever it stuck to.
I definitely like the idea and the “snag and debree resistance” part of it. I’m just skepitical because pulling from that angle is essentially how you detach finds from your magnets in the first place, slide it off by pulling from the side. Anyone else catch my drift? or am I overthinking this? Have you tried this setup? If you havent yet, I suggest having a control (the traditional setup) vs your setup and compare the pull forces that way.
@@justinnitkowski8745 What you're saying makes perfect sense. Sounds like a good idea initially but the more you think it through (as you clearly have) the more obvious it is that it's gonna go tits up.
00:42
You're gonna need a laaage waaare bottle
Buy a $25 dubble sided magnet
2:14 with auto generated cc it says its music
At 5:25 it says the plastic crakeling is applause
What are you going to do, to stop it landing upside down or on its side.??
Nothing mate i have changed my magnet now
never heard of boiling water melting plastic bottles..
I've done this on my magnet, it's the same kinda type of magnet to urs in the video, but my new magnet has just come, and it's the double sided type, how would I do the bottle thingy on that one??
N just a little tip for anyone goin do this with a heat gun, just don't go to close to ur magnet when ur heat gun is doin it's thing,, my magnet n heat gun got attached,because of the metal thing on the end of the heat gun!!! 😲😲😲
The double sided magnets don't have this problem so they don't need this solution.
Not seen your face but you must be English woodsman. I'd recognise voice and style anywhere!
+Andrew Greenhalgh hope in a good way
Magnet fishing UK yes! I've been following your other channel for a bit. Love the reviews!
@@Throwing-Magnets Probably watching your vids with a box of tissues nearby?
Hi dad
Kadi 0 O'neill up
Hi son
Yo
Magenet Fishing UK or MFUK for short
I know a MFUKer from across the pond
Ur not meant to heat the magnets up mate
+Dribbling Dragon they did not get hot mate At all, thank you for watching and taking the time to comment
Magnet fishing UK cool :D do u magnet fish in Dorset at all?
Dribbling Dragon just bradford for now mate
Magnet fishing UK dam that's pretty far getting bit bored on my own aha my friends think I'm stupid for doin this
Dribbling Dragon do what ever makes you happy
rip
Your magnet looks like Its not very powerful - Best to buy a Neodymium magnet as they are a lot more powerful!
Don't listen to this. Does anyone else see it's not a neodymium mag? 😂.
It don't look as pretty as mine but it gonna do the same thing less snagging more catching subscribed liked return the favour happy hunting
Thats Lucy do you have trouble getting it to land right or does it flip
John Matejka no I don’t have any problems landing it and I have never got caught up on the river bottom and I have caught some heavy stuff try tweek you bottle with heat gun work top of bottle then the bottom last trim any excess off hope this helps
That's Lucy, do you have a link to a video of your setup?
How NOT to use a knife.
Your volume is way to low
Yea so heat kills magnets
You don’t need that bullshit. Magnets are powerful enough to grab sideways.
.
Or....... just buy a double sided magnet.
Ummmm....isn't it um....GOING TO FLOAT !? I know the magnet itself is heavy ...but air will still become trapped into the plastic ..you will be bobbing at the bottom of the river....not getting all you can get out of the magnet ..:/ 🏗🚣♀️⚓💰💱🖇🗝⚒⛓🔧🔩
...and the heat just damaged your magnet. 😬
That is a weak magnet!
+Black Dog I know mate I am waiting to get some new ones
Useless idea
Is he even speaking English?
No mate ......of course I am
Shit idea
Don't do this please.