i agree with Wazzy boy, you could so easily of been seriously hurt or even killed, never work under a car without axle stands and if you don't have any then borrow some, thank you for the video though, showed me what i needed to know.
@@kmarkoThe wheels arent enough, the downward bounce and weight of the car coming down would be enough to bring the vehicle down with enough force to crush your skull. If you don't own a jack stand, take a tire off and put it under your vehicle as i use to when i was starting out as a mechanic.
Hi mate can you point me in the right direction i have a peugeot 5008 registration MJ15EBK and its saying the levels too low where can i get the stuff please and can you send me the link where i can get the right stuff thanks
No no, ADBlue is diferent additive. ADBlue is only for p5008 with engine system Blue HDI. Additive for p5008 is Original Infineum F7995 or EOLY 176 for cars made FAP 1.11.2002 -1.3.2010.Can mixed together. Warning- not mixed additivum Eolys DPX 42 cars made FAP before 1.11.2002.
No no, ADBlue is diferent additive. ADBlue is only for p5008 with engine system Blue HDI. Additive for p5008 is Original Infineum F7995 or EOLY 176 for cars made FAP 1.11.2002 to 1,3,2010. CAn mixed together. Warning!!! - not mixed additivum Eolys DPX 42 cars made FAP before 1.11.2002.
AdBlue is nothing to do with the Particulate Filter. AdBlue is used in SCR (Selective Catalytic Reduction) to convert NOx into water and Nitrogen. YOu may have a vehicle with a DPF AND an SCR to meet Euro 6 emissions, but older cars will just have the DPF system. It is however, very important that you use the right type of additive. Always check first the correct type of additive you need as some of the types CANNOT be mixed together.
Just replaced the dpf fluid. This video was very helpful, thank you
Hi Guy,
Thank you for your video.
Nice video mate but please use a trolley jack and axle stands as it's much safer, these little jacks are made to quickly change your tyres.
Fuck oath there no way I ever get under a car like that
Can you please do a crankshaft sensor replacement video of the same car? Thanks!
Hello! is this appliable to Citroen C5 1.6 eHDI 110 (112HP)?
i agree with Wazzy boy, you could so easily of been seriously hurt or even killed, never work under a car without axle stands and if you don't have any then borrow some, thank you for the video though, showed me what i needed to know.
No worries. I didn't have the wheels removed.The car would fall on the wheels. Otherwise, I will always secure the car with a support.
@@kmarkoThe wheels arent enough, the downward bounce and weight of the car coming down would be enough to bring the vehicle down with enough force to crush your skull. If you don't own a jack stand, take a tire off and put it under your vehicle as i use to when i was starting out as a mechanic.
Thanks for thé vidéo, sorry but i have à problem... how have you shooted the « fault » « alarm » on the CPU car?
Hi mate can you point me in the right direction i have a peugeot 5008 registration MJ15EBK and its saying the levels too low where can i get the stuff please and can you send me the link where i can get the right stuff thanks
Can you tell me how to reset the computer so that there is no announcement anymore that the additive level is too low ?
You must do it by autodiagnostic program. For example DiagBox-Lexia.
Which version is it related to? I have a 5008 2.0 HDi 16V 150CV FAP. Is it applicable to this model?
yes
Sympa la chandelle, c est quoi comme marque ? 😂😂😔
where did u buy additive?
Ebay us probably the best place
No sound?
i think u can only find a pipe head without remove tank ;;;;;and easily fill up it
Simpler and clearer to put it out for me. Unclear work
I can't find this additive. Can just add, ADBLUE instead?
No no, ADBlue is diferent additive. ADBlue is only for p5008 with engine system Blue HDI. Additive for p5008 is Original Infineum F7995 or EOLY 176 for cars made FAP 1.11.2002 -1.3.2010.Can mixed together. Warning- not mixed additivum Eolys DPX 42 cars made FAP before 1.11.2002.
No no, ADBlue is diferent additive. ADBlue is only for p5008 with engine
system Blue HDI. Additive for p5008 is Original Infineum F7995 or EOLY
176 for cars made FAP 1.11.2002 to 1,3,2010. CAn mixed together. Warning!!! - not mixed additivum Eolys DPX 42 cars made FAP before 1.11.2002.
marko thank you, I'm in a hard situation since the Peugeot dealer ship in this country doesn't have eolys. I don't know what to do
AdBlue is nothing to do with the Particulate Filter. AdBlue is used in SCR (Selective Catalytic Reduction) to convert NOx into water and Nitrogen. YOu may have a vehicle with a DPF AND an SCR to meet Euro 6 emissions, but older cars will just have the DPF system. It is however, very important that you use the right type of additive. Always check first the correct type of additive you need as some of the types CANNOT be mixed together.
How much quantity a tank like this takes? Thanks
about 3l - whole canister or to the top edge
@@kmarko thank you for your reply I appreciate that
No need to take the tank out , I have done it far more easier and faster .
Yes: check Luis' video. Great job!
Please post the video how you did it. Tks !
@@tonytan6584 lol video is posted you just need to look for it , if wasn't how people would say here about it ?....
czcams.com/video/-73051UMpqw/video.html&lc=z23wsdxjgnb2i1nuaacdp433jes0avc23zhncsopk1dw03c010c
Anyone that works under a car using a stupid little jack need to learn basic mechanics safety
No worries. I didn't have the wheels removed.The car would fall on the wheels. Otherwise, I will always secure the car with a support.
@@kmarko even if fell on wheels the bounce is enough to crush your chest. Always health and safety first