Speed Ramping done right | After Effects Tutorial
Vložit
- čas přidán 3. 03. 2019
- in this video i show you how to do speed ramping like Sam Solder, JR Alli, and many other talented filmmakers.
Follow my channel for more filmmaking tutorials :)
If you have any questions about speed ramping, or something else you want to say, please write a comment and i will happily answer it! - Krátké a kreslené filmy
Simple and clear. No bullshit. Keep up the good work!
Thank you!
it has a little BS lol, skip to 1:09
too much rumble
but it works so thumbs up haha
there was a lot of bs
4:31 the whistle though ..nice work bro
ahhahahah thanks man!
Yeah, where can I get that plugin ... or is it an expression?
most simple and accurate explanation on youtube about speed ramping in after effects. short and simple! thanks!!!
I second the simple and clear comment couldnt be more grateful thanks a bunch
Thank you so much. I’ve been looking for this for a week.
Thankful i could help!
Bro you don't know how much I searched for this video but finally I got it thanks a lot
Woah, this is exactly what I needed!! Thanks allot, will be perfect in my edits :D
No problem. I'm happy i could help you!
best one yet....kept it very simple bud ....many thanks
Simple and informative. Thank you for the tutorial ❤️.
Thank you for making this so simple!
youre very welcome! I'm happy i could help
Thats my tut looking for! Great work 👍👍
Thank you for this tutorial so helpful.
Thanks, that was very helpful. ✨
dude i love your voice and the tutorial is soooooo nice!!!
Super helpful! Thanks!
Congrats on 100 subs dude! 😉👏
Thank you so much man! This video blew up and its insane. i can't believe it haha
Great Video!! Thanks so much!!
Thank you!
u r the bro man🙌
Very good. Tks!! Brazilian here. 🇧🇷
Awesome Video mate, keep it up!!!!
Thank you so much man! Really happy you liked it! I will probably make more tutorials in the near future
AMAZING!!!!
Finally, thank u
THANK YOU SO MUCH!
YOURE SO WElCOME
what effects did you use on 0:11 that look like some kind of warping in the center?
Hi really nice tutorial but I always have problems when I cut my clips that I can’t find all keyframes and if I do it after the speed ramping it just cuts
Very nice, thank you
you're welcome :)
You just earned my sub
Ayy appreciate it bro! I hope you learned something! And i'm happy i could help :) Let me know if you have any questions and i'll happily answer.
you are a lifesaver man and I have a video recommendation can you make a video about how to speed ramp like Danial Shiffer, peter Lingren and etc
i gotchu bro. Thanks so much for the recommendation! Will look into it for sure!
Simple and easy. Thnks Bruv
Thank YOU bruv. Really happy i could help you!
How do I just do the smooth slow mo without speeding up what’s in between?
Excelent video, and the google earth idea it's simple but way clever, thanks bro
Thank you so much man!
Thanks for the video! I'm trying to do it again, but after clicking on enable time remapping only one keyframe appears, the first one ((( Why can this be?
thanks, good video!
Thank you man!
nice bro!
very good
Good information
love u bro from PAKISTAN
Love you too bro!
good stuff man
Means a lot! Thanks!
You got a suggestion of a place we can get footage from to practice this with?
thanks a lot
You're welcome my man
Thanks!
no problem! Hope it helped you ;)
noice the whistle whoosh gave me the feel aeeee ,Xd
hahha yess
You made it into a 5sec clip but still there's a left static frame after the speed ramps key frame, so how can I export it into a 5sec clip?
Отлично! Спасибо ))
question, what was the music you used
Thanks For the Tutorial Bruh, And Welcome to Morooco anytime
Thanks bro 😍😍
youre very welcome my man
What app do you use to screen record? Thank you!!
Thx!
my pleasure :)
Would u apply warp stabiliser before or after doing time remap on ae
Sorry i'm answering this late man. Depends on your video. Eventually you could do both if the footage is really shaky. I would do before tho, because doing a speed ramp on shaky footage can fuck up the vid a lot
no need to ease in or ease out any of the keyframes? I'm new to AE so just wondering
Really Good tutorial. But please fix your Audio its horrible haha
Thanks man! Good to hear. And i will fix my audio ahahahah
you could easy ease the key frame and then adjust it in the graph editor which seems easier to me
Yeah that is true. I wanted to show yall how to make it without using the easy ease shortcuts so you can learn to adjust the speed ramp to your wanted style ;)
@@birklstutorials4131 thanks for the reply man 👍
so how do you go about if you want to do it the other way. Start off regular speed and ramp up a specific section in the video?
I know this is late but what you do is you make a key frame where you want the speed ramp to start, then another where you want it to end. Then what you do is take the 2nd keyframe you just made where you want the speed ramp to end and move it to the left toward the first keyframe you just made for speed or to the right to slow it down. The 1st keyframe you just added where you want the speed ramp to begin won't move at all, only the 2nd.
TL/DR
1.) Add two keyframes (1st starting where you want speed ramp to begin, the 2nd where you want the speed ramp to end)
2. Only move the 2nd keyframe you made toward the 1st for speed or away for slower.
3. After that the clip will go back to normal
how much worse is premiere ramping to ae because i edit all of my stuff on premiere and would there be a need to transfer it all just for ramping?
is it possible to do slow fast and slow again? I tried swapping the process it it went reverse lol
thnx :)
my pleasure :)
oh wait i did the same but after when the curves finishes my video freezes how do i fix it
For some reason, when I select enable time remapping it doesn't lay down the keyframes like in your video. I not sure why I don't see a keyframe at the start and end of the clip. Any suggestions would be helpful. Thanks
same problem have you found a solution?
@@slayernoblesse5966 Hello boys. This might be because you have trimmed the span of your video or cut it. If you trim a video by dragging either end, the keyframe will stay in place and "disappear" if you shorten the video. The keyframe will still be there, but you won't be able to see it at first notice. I am pretty sure you have to open the time remapping effect to reveal the keyframes. Here you will see that the keyframes are outside of the duration of your clip.
Solution: BEFORE you change the position of any time remapping keyframes in your clip, put one time remapping keyframe at the start of your clip and another one at the en. ex: 2:16 the two keyframes are at the start and end of the grey video. This is where it cuts. You make keyframes by pressing the diamond button to the very left of your time remapping effect. You can then proceed to add the two inner keyframes and then shorten the clip down to make some awesome speed ramping!
Really hope this helped lol. i should really sleep..
@@birklstutorials4131 I see thankyou for the fast reply very helpful
Yo dude , when I keyframed my clip and then trimmed , there is very little height on the graph , why is that
can someone explain how to do the opposite? For example slow start which smooths into a quick fast part and back to slow? Think sniping montage.
AllAmericanVideoGamer trying to figure that out myself
Hey man. I'm sorry i didnt see your message before now. You simply drag the two outer keyframes of the speedram outwards - away - from the clip (to make it slower, extend time) and drag the two inner keyframes towards each other - making the footage between those keyframes faster. This will look different in the speed graph editor, but you can apply the same principles as i teach in the video :)
Great Tutorial.
When i enable Time Remapping, I do not get any keyframes to appear. Can you assist?
FaKerror I am not sure why the key frames would not appear at the bottom of the clip in the timeline. After loading a new clip in a new file, it worked. However, it never worked on the original clip in question. I’m thinking maybe the clip was too long and the ends were just not visible but I was able to figure it out on others.
@FaKerror Thank you! I'll be trying this today
@Error you got it my man.
i did as you told and still cant get that U shape how do i get that bro?
for some reason when i move a keyframe after i make it, it doesn't represent the same frame as the one i selected before moving it (that's the reason i came here), any idea why that is?
never mind, it happened because i used two different time effects at once (one of them being time remap and the second being time warp)
@@krazychicken ahh okay good you found out
POV ur a legend named birk LS
what do i do when it messes up the audio?
This would be really useful if I used ae but I use free version of DaVinci resolve and can’t find a single tutorial on how to speed ramp. It’s fine if you don’t but do you know how I could or more realistically a video I could watch?
FaKerror really? How
Hey bro. So I basically recorded a video with Google Earth Studio swell. I thought saving in 60 FPS is better for Slowmo. After applying Warptime to whole clip it looks choppy. If I try to do change the composition settings to 24 it doesn't slow down. I don't know why. Do you have any Idea? Also can I ask at what FPS you recorded this Google Earth Studio Footage?
I am very sorry that i am responding to your comment this late. I am not sure what the cause of the problem is here. I don't know what warptime is. I am pretty sure i recorded in 120fps, but i am really not sure. It is one year since i recorded this. I don't think changing the composition settings will slow it down, but i really don't know. I can recommend watching some tutorials on the google earth recording thing.
Ik im replying after 2 years and u probably dont need this information but for anyone else...the slowed video is choppy because u are slowing it down too much...try changing the frame interpolation to optical flow or frame blending for a smoother video.
Read. Thank you 😃🖤
I'm setting up the keyframes same as you did (I think?) but my graph editor doesn't look like yours. It looks like the side of a mountain?
Hey man. You need to right click in the graph editor. I don't remember which one you have selected, but it's either value graph, or speed graph. If you have value graph selected, you gotta select speed graph. And vise versa.
Just click speed graph
0.39 lmao 😂😂
I also think that
Nice tutorial but epic fail how your keyframe left the screen when you were dragging it in graph editor
yes hahha
Goodd
when i press time remapping on my video i dont see two keyframe. i cut out the piece i want to remap but the keyframes dont show up
Same
@FaKerror thanks bro I'll try that
That 7th sec song name 👀
For some reaSOn i cant make the curves itreverses the video
i love you
love u too
HomieSexual
@@petitecustom 💀💀💀💀💀💀💀
I cant see those lines on the graph...please help thanks
Get a pof pof protector to ur mic man, by the way, cool video
very clear. you'll need to clean your mic tho xD
lol. will do for next vid
Can I do it with 2 clips?
you can apply the same technique to two clips separately, but it is hard to make it exactly the same.
what if i cant see the graph
goooooooooooooooooooooooooooooooooooooooooood
Bro. Why the duration of the clip doesn't change like in premiere?
That is just how after effects works. You have to cut the clip then outside of the keyframes and then adjust it to your clip (the keyframes).
56k views and only 207 subs
u deserve more subs
thx man 😭
i dont have that ball to smoothen up the slowmo
when i went to the graph editor it didnt look like that
I think change it to value graph
yes. You have to right click and change it to value graph. It either has "edit value graph" enabled or "edit speed graph." You'll have to enable either of these until it looks like my graph editor ;)
tenk yu
u welcom
Anyone can help me for that graph ?
yes
lashi khmyazeh nakesh
Song name ?
Laxcity - evening ;) I think that is what you meant. I found it here: czcams.com/video/elM5-PXFD2Y/video.html
what song is this 0:07 - 0:12
Laxcity - Evening
i only get one key frame ...
well you need to place some more to make it work man
Music name ?
Laxcity - evening ;) I think that is what you meant. I found it here: czcams.com/video/elM5-PXFD2Y/video.html
@@birklstutorials4131 thanks
Mines so weird , it goes faster not slower
Zayne u have to keep the two middle key frames apart because in between there is the bit you want to be normal speed or slow mo
Yes. Like @Noah Pac says, then you have to move the two inner keyframes/points outwards so you stretch out the time the section takes. I dont know if that makes sense, but otherwise just make sure that there is more space between the middle two keyframes than the outer to inner keyframes. Has to look like what i make at 4:40 ;) Hope this helped
I don't see any planes coming on trade centre.
woopsie
mange tak
det var så lidt! håber det hjalp ;)
my graph editor looks nothing like yours why could that be?
Make sure track is selected, right click in the graph you see, change it to speed graph (not value graph)
@@AdrianPenny 🙏
RIP mic
mic quality lol
pretty good ;D