F250/F350 Powerlocks Not Working? Try THIS!
Vložit
- čas přidán 25. 08. 2024
- Do you have broken doorlocks on your F250? This part is very common to break on these trucks and its cheap!
Hit that Subscribe button to stay up to date on the 7.3!!!
Door locks not working on 2000 F250/350?
This is most likely your problem:
www.1aauto.com...
Installation Video:
• How to Replace Door Lo...
RiffRaff Diesel Tymar/6637 Complete Intake:
www.riffraffdie...
Song:
/ adventures
Don’t do this first! I read on a bunch of forums that it was likely the power lock actuators that were causing my power locks to not function. So I stripped my door panel off, removed all the harnesses, bolts, clips, rods and door handle to get this job done. Had a hell of a time to get it all back in properly with the new actuator. And......it wasn’t the problem.
You know what the problem was? The power door lock relay. An $8 part that is super easy to get to (under the steering column). So unless you’re a patron for punishment, try the relays first.
Thank you for looking out!
I was totally new to this Powerstroke stuff and it ended up fixing my issue! But this is a good idea!
Apparently another common reason for door locks not working, such as lock working but no unlock, is when you have an aftermarket alarm installed, sometimes they nick a wire and causes this issue for a lot of people.
Another edit on this: my year didn’t have a power door lock relay. Came a few years later. So idk what relay I replaced but there it is lol.
99% of the time, the actuator is the problem. If the relay goes out, you lose all of them at the same time. The OEM parts are junk. There are dozens of aftermarket ones available and once you've change them a couple of times, the swap is pretty straight forward. This video is pointless on process of replacing them but there are a bunch of good ones out there.
Don't be afraid. This is a 40 minute/3 beer newbie swap, 1 beer/15 minute after you've done a couple before.
@@IronSheik417 It's a weak actuator. Swap it out. Relays either work or they don't.
Haha, I don’t have to worry about this problem with my xl model. Power nothing haha.
You could have showed us how
Easy on this truck since it’s a two door, But fuck, I got a fucking excursion 😂
Powerstoked first video sweet I'm probably gonna watch all of these videos!
Dude thank you!!
In just digging the channel
Obvious and inhouse reply and was no big help just needs practice and so would i if trying a video .
I own a 2001 e 250 van , all the locks work except the master switch on the driver's door, its supposed to lock all the doors , but it don't .I got a new switch, didn't work ,any ideas...
No it's been working hours and we had to replace the computer and everything else and it still don't work so what the hell is it
Need ya to come back!
I KNOW😭 I feel so awful, but man has life taken me and Sierra for a ride lately.
@@TurboDrivenAustin man I understand completely. I wanted to hit ya up and let you know that we're still out there. Take care of your business and I hope all goes well man. Dont let it get you down!
Thank you so much, you all are seriously awesome. I will always do my best to stay in contact and comment back even if I can’t post! I’ll be back. And it will be awesome. I miss making videos, it is one of the most things I have ever done, and I can’t wait to create MORE content.
@@TurboDrivenAustin we'll be ready man!!! Have a great Christmas and new year bud!!
My truck locks when I push it down and all the power buttons will lock the drivers side and unlock but no power works to passenger side kinda weird but getting new doors on it soon when I restore it to be rust free again anyway hopefully it fixes it 😂
What was the issue?
Omg you improved so much
Hahaha RIGHT?!?
Follow up on my power locks not unlocking but locking. Replaced actuator. No change. Checked wiring, ok. Just ended up replacing driver side door lock switch. Problem solved. Apparently the switches are known to go bad as well on these trucks.
I went OEM. $80. Not many sell these bc they changed them a bit in 2002 or somewhere around there. Called the Ford dealership to get the part number.
Driver side SW 7089 and passenger side SW 7096 for a 1999 F350. Driver side is the master switch, which is usually the culprit. That’s the $80 one. Passenger side is $40. Took 2-3 minutes to replace them both. Wish I wouldn’t have messed with the actuator lol. This is with a truck without a vsm.
You didn't show me how to replace it.
Enough with the music
This video could be quite a bit better and quieter music DANG (joe dirt voice)
😂😂 i may try to do it better in the future, I was new to CZcams and editing 😂😂 I’m sorry if I ruptured your eardrums 😂
PowerStoked yeah I'm not a professional at making videos either you can check mine out LOL
Lol that’s ruff dude but it’s funny
This video was not helpful at all.
Waste of my time if you don't actually show what to do
I don't care what time it is! I don't care that you got mail! I don't care where you bought it or how much it costs! Fix the dang door! I'll never watch this site again!
I’m sorry that this video wasn’t helpful! It was my first ever video and I was learning how to do this! I hope you come back, I’ve gotten much better and have tons of videos on fixing issues on these trucks that have better video coverage and explanations!!
@@TurboDrivenAustin Well some us appreciate you taking time to post helpful tips. I'm not sure what's the problem with my locks 3 of my cars have same problem. Passenger side locks but drivers side won't. Weird that all have same issue. lol!
Put a new actuator and that's not the problem all other doors work fine except real left driver side.